La Defensa PhD tendrá lugar, a las 12 del mediodía, el próximo viernes (26 de octubre) en la sala verde, en la primera planta, de la Escuela de Ingenieros de Caminos, UPM (ETSI Caminos, Ciudad Universitaria)  La disertación se titula "Energy Harvesting Materials Based on Carbon Nanotube Fibre for

 Abstract:  It is presented a rigorous framework developed for formulation of constitutive models. Based on representation theory for tensor functions and scale-bridging theorems, this framework enables the development of constitutive models that account for the influence of crystallographic

Nuestro cento organiza el 55 Congreso de la Sociedad de Ciencias de la Ingeniería (SES 2018), el primero que se celebra fuera de Estados Unidos, que tiene lugar en Madrid entre los próximos días 10 y 12 de octubre. Este Congreso es un foro interdisciplinar en el que ingenieros y científicos de todo

Abstract Over the past few years, graphitic carbon nitride (g-CN) has attracted widespread attention due to its outstanding electronic properties, which have been exploited in various applications, including in photo- and electro-catalysis, heterogeneous catalysis, CO2 reduction, water splitting,

Discrete slip crystal plasticity modeling of deformation in nanolayered materials Irene J. Beyerlein1, Tianju Chen2, Rui Yuan2, Caizhi Zhou2,3 1 Mechanical Engineering Department, Materials Department, University of California at Santa Barbara, Santa Barbara 93106, USA 2 Department of Materials

Abstract Herein, highly ordered mesoporous pseudocapacitive electrodes for superior Li-ion storage are discussed. Hierarchical 1-D Co3O4nanorods of size ~20 nm with interfaces between the crystallites were synthesized using hydrothermal method followed by calcination. This 1D nanorods exhibited

Abstract Additive manufacturing (AM) is a layer by layer process that has the potential to disrupt traditional fabrication methods. It allows fast manufacturing of three dimensional pieces from metallic powders, with great exibility of design, potential for weight reduction, fast production speed

En la segunda temporada de IMDEA-CSI, los investigadores de los Institutos IMDEA resolvieron un nuevo misterio, contando con la ayuda de algunos miembros del Cuerpo Nacional de Policía. Analizaron las pruebas recogidas en la escena del crimen para descubrir al asesino en esta actividad de La Noche

Abstract: Solidification is one of the major steps in producing parts from the molten material in casting, welding or additive manufacturing. On top of process optimization and simulation to obtain good mould filling and minimized defects, the quality of the cast parts depends strongly on the

Abstract In this study, dimension control and nanostructure design were applied in developing electrode materials for superior Na-ion storage. Firstly, hierarchical Co3O4nanorods with increased number of interfaces between individual nanocrystallites were prepared for enhancing pseudocapacitance

ABSTRACT: The main objective of this work is to create a physical platform for material characterization and parameter identification at macroscale as a function of applied strain rate, understanding how the strain rate affects the damage and mechanical response of three different composite material

La Defensa PhD tendrá lugar, a las 12 del mediodía, el próximo viernes (7 de septiembre) en la sala verde, en la primera planta, de la Escuela de Ingenieros de Caminos, UPM (ETSI Caminos, Ciudad Universitaria)  La disertación se titula "Development of Multifunctional Flexible and Structural

Resumen: Advanced composite materials are now used in a wide range of industries, including aerospace, marine, construction, transport and recreational sport. The ever-increasing pressure on producing quality parts effectively and efficiently has led to many innovations over the years in

Elisa Fresta ha sido galardonada con el Premio a una de las mejores Tesis de Máster (año 2015/2016) de la Universidad de Turín. La tesis se desarrolló a cabo de forma conjunta en la Universidad de Turín y la Universidad de Erlangen-Nuremberg bajo la supervisión de la Profesora Claudia Barolo y el

Investigadores de nuestro centro y de IMDEA Energía han desarrollado una nueva tecnología de electrodos nanoestructurados capaz de desalinizar agua con un bajo consumo de energía, en determinadas condiciones claramente inferior al consumo requerido utilizando métodos convencionales, tales como la

Abstract: In view of the future application of polymer matrix composites for structural components subjected to impact loads, there is a need for development of experimentally calibrated constitutive models for polymers that include their inherent viscoelastic and viscoplastic behavior. These

El trabajo de Ph.D se titula "Estudio de retardo de ignición y supresión de humo de compuestos de polímero ignífugos" bajo la supervisión del Dr. De-Yi Wang. Tendrá lugar a las 12:00 p.m. (16 de julio) en la "Sala de seminarios" de ETS de Ingenieros de Caminos, Canales y Puertos (ETSI Caminos,

Synchrotron Laminography: A Technique for In situObservation of Damage and its Evolution Inside Engineering Materials Lukas Helfen,1,2Mark N. Mavrogordato,3Thilo F. Morgeneyer,4T. Baumbach1 1 Institute for Photon Science and Synchrotron Radiation, Karlsruhe Institute of Technology, PO Box 3640,

Porphyrin-based nanomaterials: design, synthesis and applications  Abstract  The development of new nanomaterials and nanotechnology currently have a huge impact on modern science. Within this trend, a field that has taken relevance is the construction of nanometric supramolecular systems through

La Defensa PhD tendrá lugar, a las 12 del mediodía, el próximo viernes (13 de julio) en la sala de seminarios del Departamento de Ciencia de los Materiales de la Escuela de Ingeniería Civil de la UPM (ETSI Caminos, Ciudad Universitaria). La disertación se titula "Modelos de Micromecánica

ABSTRACT Solid-state lighting (SSL) is one of the biggest achievements of the 20th century. It has completely changed our modern life with respect to general illumination (light-emitting diodes), flat devices and displays (organic light-emitting diodes), and small labelling systems (light-emitting

El evento tendrá lugar el próximo miércoles 11 de julio a las 12:00 pm en la Sala de Seminarios del Departamento de ciencia de Materiales,  E.T.S.I. Caminos (Campus de Ciudad Universitaria,

Abstract ViPER (Vilas Pol’s Energy Research) laboratory at Purdue University focuses their research activities on the development of high capacity electrode materials, their engineering for longer cycle life and improved safety. Considering the advantages and limitations of known synthesis

Tecnologías de impresión 3D, nuevas posibilidades de productos a medida y servicios para COT Se realizará una introducción a las actividades del IBV (Instituto de Biomecánica de Valencia), para a continuación explicar las bases biomecánicas de la fabricación aditiva mediante EBV que llevaron al IBV

Abstract Composite materials are a serious competitor for lightweight metals used in the aerospace and automotive industry. Fast production methods like thermo-folding, diaphragm forming or stamping can produce large numbers of CFRP components in a cost efficient way. The weight saving benefits of

Abstract Permeation barrier films are critical to a wide range of applications ranging from food and medical packaging to organic electronics and photovoltaics. For some of these applications, not only low permeation values are required but also flexible and transparent. Here, I will present

Abstract As Additive Manufacturing technologies are being adopted in more and more industries, the focus of research and development is shifting to the materials in use. On the one hand, limited processability of high-performance materials restrict the robustness of the process in some cases, while

Los resultados de las actividades de investigación realizadas en nuestro centro durante el año 2017 están resumidas en este documento. En él se puede encontrar información sobre los Investigadores Principales del centro, proyectos en curso, nuestra infraestructura científica y las actividades de

Resumen de su grupo Nano-ingeniería de dispositivos termoeléctricos (FINDER) (Instituto de Micro y Nanotecnología) La línea de investigación se centra en la optimización de los dispositivos termoeléctricos mediante su nanoestructuración. Un dispositivo termoeléctrico es aquél capaz de convertir

Biografía corta El Professor Thomas R. Bieler se graduó en Mecánica Aplicada en la Universidad de California en San Diego en el año 1978 y posteriormente, realizó un Máster en Ingeniería Cerámica en la University de Washington (Seattle) en 1980. Tras cinco años en el Laboratorio Nacional Sandia en

El 16 de Marzo, el Director  y la Subdirectora de IMDEA Materiales entregaron los premios a los ganadores de la 7ª edición del concurso de imágenes de IMDEA Materiales.

Abstract Atomic interface structures provide a unique opportunity to design new materials that can provide promising solutions to future technological demands. This talk presents an overview of two diverse areas of activity at the Surface and Nano Engineering Laboratory at the University of Texas,

Abstract Platinum-based materials are highly active as the electrocatalysts both in hydrogen evolution reaction (HER) and oxygen reduction reaction (ORR) in fuel cells, but high cost limits its wide applications. In this talk, the reporter summarized the recent research progress of designing and

El evento tendrá lugar el próximo martes 23, a las 12:00 pm, en la Sala verde (1ª planta) de la Escuela de Ingenieros de Caminos, UPM El link para ver donde está la Universidad es el

ABSTRACT Poly(ethylene terephthalate) (PET) is extensively used in the production of fibers and films and now increasingly used as container material for soft drink due to its outstanding characteristics of high strength, good flexibility, and thermal stability, but their uses are limited by their

Abstract Fire hazards including the generation of heat, smoke and toxic vapor, cost a great number of lives and damage properties. Compared with natural polymers, the high flammability and the widespread use of synthetic polymers lead to serious safety and environmental problems. Therefore, methods

La Defensa de la Tesis Doctoral de Alberto Palomares, titulado: "Micromechanics of fully lamellar TiAl alloys: effect of lamellar orientation and width”, supervisado por el Dr. Jon Molina Aldareguia y la Dra. Teresa Pérez Prado, tendrá lugar mañana jueves 21 de diciembre a las 11:00 a.m. en la "Sala

Decentralized Chemical Sensing: From materials to real world applications My group works at the interface of fundamental and applied chemical science and our aim is to solve real problems that human society is facing or will be facing soon. There is an urgent need of decentralized chemical

Abstract: Recycling of composites by recovering carbon fibres of cured prepregs, and their re-use in hybrid laminates by Andrea Fernández Gorgojo The applications of composite materials are rapidly growing in several sectors. For example, in the aeronautical sector, composites can account for up to

The PRISMS Framework: An Integrated Predictive Multi-Scale ICME Capability for the Global Materials Community John Allison University of Michigan, Ann Arbor MI The Center for PRedictive Integrated Structural Materials Science (PRISMS) is a major Materials Genome Initiative effort creating a unique

Abstract Flame retardants are going to be such an important component in future Lithium-based batteries. However, these flame retardants have a major problem: they decrease the conductivity values of electrolytes. During this project we have been trying to use some new optimization techniques

ABSTRACT The increasingly demanding environmental and safety goals imposed to the automotive industry have fostered fierce competition to develop new multi-phase steel types that are stronger, tougher, more formable, and fatigue-resistant. Among the various approaches in study, steels processed via

The winner is Miguel Ángel Valdés on his winner project entitled “Ultra-rapid processing of advanced high strength steels”.

  En esta ocasión, smartLIGHITNG y el Instituto IMDEA Materiales, tiene el placer de invitarle a la presentación en absoluta primicia del BioLED, una tecnología que va acaparando premios y reconocimientos por todo el mundo de distintas organizaciones, como la del prestigioso y solvente,

DESIGN, FABRICATION AND COMMERCIALISATION OF NEW CATALYSTS ENGINEERED AT THE NANOSCALE J. García-Martínez Laboratorio de Nanotecnología Molecular, Dpto. Química Inorgánica, Universidad de Alicante, Ap. 99, E-03690 Alicante, Spain. www.nanomol.es; Rive Technology, Inc., 1 Deer Park Drive, Monmouth

Abstract: In this study, nanoengineered pseudocapacitive electrodes are developed for superior Na-ion storage. Main aim is to induce defect-driven pseudocapacitive Na-ion storage in insertion and conversion type anodes. Hybrid anatase-bronze TiO2 nanosheets composed of Nanocrystallites of

ABSTRACT: The susceptibility to delamination is one of the main concerns in fiber reinforced polymer composites (FRPs), while carbon nanotubes (CNT) carry the promise of enhancing this poor out-of-plane mechanical performance. This work reviews the progress to date towards methods of

Abstract Conducting redox polymers (CRPs) are composed of a conducting polymer (CP) backbone and redox active functional groups (RGs) and they provide an attractive option as organic matter based electrical energy storage materials. The CP backbone renders the material conductive and, due to the

ABSTRACT Microbial Electrochemical Tehnologies (MET) are a recent research field related to environmental biotechnology. The main concept for its development is related to the ability of the microorganisms of producing electricity from organic matter degradation, using an insoluble electron

Low-Dimensional Nano-Carbons: Form Doped Carbon Nanotubes and Doped Graphene to 3-D Hybrids and Biological Applications Mauricio Terrones1 E-mail: mut11@psu.edu 1Department of Physics, Department of Chemistry, Department of Materials Science and Engineering and Center for 2-Dimensional & Layered

Abstract Ultrafast heating (UFH) has recently attracted significant attention of steel research community due to its advantages over conventional heat treatment of advanced high-strength steel (AHSS) including very short processing time, reduced energy consumption and low carbon footprint. The UFH

ABSTRACT: Towards High Efficiency Devices- Avoiding Electron Recombination in Dye-Sensitized Solar Cells

Abstract The main objective of this work is to gain a fundamental understanding of the behavior characteristics of a quenched and partitioned (Q&P) steel at high strain rates by employing Split Hopkinson bar testing, drop weight impact testing, electron backscatter diffraction (EBSD),

Microstructure informed constitutive models and SPH crystal plasticity modelling approaches Anxin Ma Group of mechanics of materials of IMDEA materials anxin.ma@imdea.org During the deformation of polycrystals, pronounced strain gradients may occur due to mis-orientations and eigen strains of phase

Abstract The objective of the present project is the development and numerical implemen- tation of constitutive equations for the coupled thermomechanical damage problem in the speci c context of the in nitesimal strain approximation, within the framework of the thermodynamics of irreversible

El evento tendrá lugar el próximo lunes 4 de septiembre, a las 12:00 pm, en la Sala de Seminarios (al lado de la “Sala Verde”) de la Escuela de Ingenieros de Caminos, UPM El link para ver donde está la Universidad es el

Maurice N Collins Stokes Laboratories, Bernal Institute, University of Limerick Abstract The first part of the talk deals with the hyaluronic acid biopolymer. Hyaluronic acid (HA) is a glycosaminoglycan that is found in extracellular tissue in many parts of the body. It is a material of increasing

Stick–slip dynamics of flow-induced seismicity on rate and state faults Luis Cueto-Felgueroso Departamento de Ingeniería Civil: Hidráulica, Energía y Medio Ambiente Universidad Politécnica de Madrid luis.cueto@upm.es ABSTRACT Changes in pore pressure due to the injection or extraction of fluids from

Alloys-by-Design: Optimisation of Compositions of Nickel-Based Superalloys Roger C. Reed, Daniel Barba and Enrique Alabort University of Oxford, Departments of Materials and Engineering Science, UK Ni-based superalloys are a class of materials widely used in the aerospace sector due to their

Accelerated discovery and development of high temperature structural alloys Michael S. Titus Assistant Professor of Materials Engineering Purdue University Researchers and engineers constantly seek out new materials systems that increase the operating temperatures of critical components in

Abstract Metallic alloys are widely used in engineering and are in constant development to optimize their properties. Computational strategies to perform virtual design and testing of these materials would reduce the high time and costs associated nowadays to the development of new alloys with

Glissile junctions: Insights from discrete dislocation dynamics and development of a continuum model Markus Stricker Karlsruhe Institute of Technology The understanding of the mechanisms governing plastic deformation of metals is the understanding of dislocation motion from single dislocations to

Intramolecular Singlet Fission: Insights from Quantum Dynamical Simulations Pedro B. Coto Friedrich-Alexander Universität Erlangen-Nürnberg, Institut für Theoretische Physik und Interdisziplinäres Zentrum für Molekulare Materialien (ICMM), Staudtstraße 7/B2, Erlangen, 91058, Germany Email:

Institut für Materialchemie, Technische Universität Wien, Vienna, Austria dominik.eder@tuwien.ac.at In this lecture I will discuss the main challenges in heterogeneous photocatalysis and present two materials design strategies. What are nanocarbon-inorganic hybrids? Hybridising nanocarbon

El evento tendrá lugar el próximo lunes 22 de mayo, a las 12:00 pm, en la “Sala Verde” de la Universidad E.T.S.I. Caminos (Campus de Ciudad Universitaria, UPM). El link para ver donde está la Universidad es el

El evento tendrá lugar el próximo viernes 18 de mayo, a las 12:00 pm, en la “Sala Verde” de la Universidad E.T.S.I. Caminos (Campus de Ciudad Universitaria,

El evento tendrá lugar el próximo viernes 21 de abril, a las 11:30, en el “Aula de Grados” del edificio “Padre Soler”, en la Universidad Carlos III (Campus Leganés).   Resumen Debido a la combinación de propiedades macroscópicas (mecánicas, eléctricas y térmicas) y su estructura

Seminar: "A general overview on multiple necking and fragmentation problems in ductile solids subjected to high strain rates" Understanding the fragmentation of ductile solids and structures subjected to high velocity impacts or blast loadings has importance in aerospace industry, military

Schedule of Presentation: 11:30-12:30 on 4th April 2017 Jenny Alongi University of Milan, Department of Chemistry jenny.alongi@unimi.it Polymer flammability represents a major limitation to their employment and thus to the development of most polymer-based advanced materials. Environmental and

ABSTRACT: Machine learning, an important part of artificial intelligence, has made a huge impact on many different areas (baking, logistic, telecommunications, etc.) during the last years. Following this trend, there are clear indications that this data-driven technique will play a fundamental role

El evento tendrá lugar el próximo lunes 3 de abril, a las 11:00 am, en el aula "Puig Adam” de la Escuela Técnica Superior de Ingenieros Industriales , UPM (c/ José Gutiérrez Abascal, 2) ABSTRACT Epoxy resins are widely applied in transportation, aerospace, electrical and electronic (EE) industrial

Abstract We provide a fundamental contact mechanics background to the interpretation of spherical indentation experiments performed in polycrystalline aggregates, single crystalline units, thin films, and minute material scales comprising an atomistic ensemble. A central issue under examination is

METALS WINTER MEETING 2017 PROGRAM 9:45 Arrival and welcome Session I Chairman: Carmen Cepeda 10:00 Marcos Jiménez “Fatigue behaviour of INCONEL 718 under cyclic conditions” 10:15 Deng Xiangxing “Development of innovative materials for the cutting sector" 10:30 Marta

Abstract LCM techniques such as RTM and VARI still require to be enhanced in order to disseminate their use in the industry. In situ VARI experiments were carried out using synchrotron X-ray computed tomography (SXCT) to study the mechanisms of microfluid within a fibre tow. A bundle of two tows of

El próximo curso de formación "Conceptos Básicos de Negocios Económicos" celebrará en la Sala de Seminarios del 2 de marzo de 2017. El programa ofrecido es adecuado para investigadores pre-doctorales y post-doctorales. Lugar: IMDEA Materials Institute (Sala de seminarios) Fecha: 2 de marzo de

El evento tendrá lugar el próximo lunes 20 de febrero, a las 12:00 en el "Aula de Grados" del edificio "Padre Soler", en la calle Carlos III Universidad (Campus Leganés).

Universidad de Zaragoza Abstract Standard simulation in classical mechanics is based on the use of two very different types of equations. The first one, of axiomatic character, is related to balance laws (momentum, mass, energy, ...), whereas the second one consists of models that scientists have

Royal Institute of Technology (KTH), Stockholm, Sweden Abstract: In material science modeling, phase field is the method of choice when morphology of the observed system is to be modeled. This full field approach is able to capture the microstructure of interest regardless of its complexity. The

Abstract:  Diamond-like Carbon (DLC) coatings have been recognized as one of the most valuable engineering materials for various industrial applications including manufacturing, transportation, biomedical and microelectronics. Among its many properties, DLC stands out for good frictional behaviour

Université Catholique de Louvain. UCL - iMMC - IMAP