Publicaciones

    2021

  • Santos, C.; Rodriguez, I,V.; Lado, J.J.; Vila, M.; Garcia-Quismondo, E. - Low-energy consumption, free-form capacitive deionization through nanostructured networks. carbon 176, 390-399, 2021. DOI: 10.1016/j.carbon.2021.01.148
  • Boehler, C.J.; Hernández-Escobar, D.; Ruiz-Palenzuela, B.; Sabirov, I.; Cornide, J.; Ruiz-Navas, E.M. - The effect of microstructure and strain rate on the 25 °C and 700 °C compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8 TiB2 (vol%) alloy. materials characterization , 110856, 2021. DOI: 10.1016/j.matchar.2020.110856
  • Liu, Z.; Yuan, X.; Wang, S.; Liu, S.; Tan, H.H.; Jagadish, Ch. - Nanomechanical behavior of single taper-free GaAs nanowires unravelled by in-situ TEM mechanical testing and molecular dynamics simulation. materials science & engineering a 806, 2021. DOI: 10.1016/j.msea.2021.140866
  • Guo, Y.; Zhou, M.; Yin, G._Z.: Kalali, E.; Wang, N.; Wang, D.-Y. - Basalt Fiber-Based Flame Retardant Epoxy Composites: Preparation, Thermal Properties, and Flame Retardancy. materials 14, 2021. DOI: 10.3390/ma14040902
  • Madrona, C.; Vila, M.; Oropeza, F.E.; de la Peña O’Shea, V.A.; Vilatela, J.J. - Macroscopic yarns of FeCl3-intercalated collapsed carbon nanotubes with high doping and stability. carbon 173, 311-321, 2021. DOI: 10.1016/j.carbon.2020.10.052
  • Chen, X.; Yusuf, A.; Sanchez del Rio, J.; Wang, D.-Y. - A facile and robust route to polyvinyl alcohol-based triboelectric nanogenerator containing flame-retardant polyelectrolyte with improved output performance and fire safety. nano energy 81, 105656, 2021. DOI: 10.1016/j.nanoen.2020.105656
  • Bellón, B.; Boukellal, A.K.; Isensee, T.; Wellborn, O.M.; Trumble, K.P.; Krane, M.J.M.; Titus, M.S.; Tourret, D.; Llorca, J. - Multiscale prediction of microstructure length scales in metallic alloy casting. acta materialia 207, 2021. DOI: 10.1016/j.actamat.2021.116686
  • Liu, Z.; Yuan, X.; Wang, S.; Liu, S.; Tan, H.H.; Jagadish, C. - Nanomechanical behavior of single taper-free GaAs nanowires unravelled by in-situ TEM mechanical testing and molecular dynamics simulation. materials science & engineering a 806, 140866, 2021. DOI: 10.1016/j.msea.2021.140866
  • Sanchez del Río, J.; Pascual-González, C.; Martínez, V.; Jiménez, J.L.; González, C. - 3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing. sensors and actuators a: physical 317, 112422, 2021. DOI: 10.1016/j.sna.2020.112422
  • Jacobo-Martín, A.; Rueda, M.; Hernández, J.J.; Navarro-Baena, I. - Bioinspired antireflective flexible films with optimized mechanical resistance fabricated by roll to roll thermal nanoimprint. scientific reports 11, 2419, 2021. DOI: 10.1038/s41598-021-81560-6
  • Alizadeh, R.; Wang, J.; LLorca, J. - Precipitate strengthening of pyramidal slip in Mg-Zn alloys. materials science & engineering a Volume 804, 140697, 2021. DOI: 10.1016/j.msea.2020.140697
  • de Oliveira, P.C.; Montoro, L.A.; Perez-Prado, M.T.; Hohenwarter, A.; Figueiredo, R.B.; Isaac, A. - Development of segregations in a Mg-Mn-Nd alloy during HPT processing. materials science and engineering: a 802, 140423, 2021. DOI: 10.1016/j.msea.2020.140423
  • Karjule, N.; Rana, M.; Shalom, M.; Barrio, J.; Vilatela, J.J. - Controlled Nucleation and Growth of Carbon Nitride Films on CNT Fiber Fabric for Photoelectrochemical Applications. advanced sustainable systems , 2021. DOI: 10.1002/adsu.202000265
  • Chen, N.; Kou, H.; Wu, Z.; Qiang, F.; Wang, Ch.; Li, J.; Molina-Aldareguia, J. - Stress-induced α″ martensitic phase transformation and martensitic twinning in a metastable β titanium alloy. journal of alloys and compounds 859, 157809, 2021. DOI: 10.1016/j.jallcom.2020.157809
  • Tsipas, S. A.; Tabares, E.; Weissgaerber, T; Hutsch, T.; Sket, F. - Thermophysical properties of porous Ti2AlC and Ti3SiC2 produced by powder metallurgy. journal of alloys and compounds 857, 2021. DOI: 10.1016/j.jallcom.2020.158145
  • Tapia-Fernandez, S.; Alonso-Miyazaki, P.H.; Romero, I.; Garcia-Beltran, A. - Strategy and algorithms for the parallel solution of the nearest neighborhood problem in shared-memory processors. engineering with computers< , 2021. DOI: 10.1007/s00366-021-01304-y
  • Schiebl, M.; Romero, I. - Energy-momentum conserving integration schemes for molecular dynamics. computational mechanics , 2021. DOI: 10.1007/s00466-020-01971-6
  • Zhang, J.; Li, Z.; Yin, G.-Z.; Wang,D.-Y - Construction of a novel three-in-one biomass based intumescent fire retardant through phosphorus functionalized metal-organic framework and beta-cyclodextrin hybrids in achieving fire safe epoxy. composites communications 23, 100594, 2021. DOI: 10.1016/j.coco.2020.100594
  • Nguyen, K.; Zhang, M.; Amores, V.J.; Sanz,M.A.; Montáns, F.J. - Computational Modeling of Dislocation Slip Mechanisms in Crystal Plasticity: A Short Review. crystal plasticity 42, 11, 2021. DOI: 10.3390/cryst11010042
  • Cantón-Sánchez, R.; Romero, I. - Dimensionally reduced nonlinear solids with general loads and constitutive laws: Theory and finite element formulation for rod-like bodies. international journal of solids and structures 210-211, 273-288, 2021. DOI: 10.1016/j.ijsolstr.2020.11.024
  • Valencia, F.; Santiago, J.; González, R.I.; González-Arrabalc, R.; Ruestes, C.; Perez-Díaz, M.; Monclus, M.A.; Molina-Aldareguia, J.; Diaz-Nuñez, P.; Munoz, F.; Kiwi, M.; Perlado, J.M.; Bringaegk, E.M. - Nanoindentation of Amorphous Carbon: a combined experimental and simulation approach. acta materialia 203, 116485, 2021. DOI: 10.1016/j.actamat.2020.116485
  • Li, M.; Benn, F.; Derra, T.; Kröger, N.; Zinser.; Smeets, R.; Molina-Aldareguia, J.; Kopp, A.; Llorca, J. - Microstructure, mechanical properties, corrosion resistance and cytocompatibility of WE43 Mg alloy scaffolds fabricated by laser powder bed fusion for biomedical applications. materials science & engineering: c 119, 111623, 2021. DOI: 10.1016/j.msec.2020.111623
  • Avvaru, V. S.; Jimenez-Fernandez, I.; Feng, W.; Hinder, S.J.; Castillo-Rodríguez, M.; Etacheri, V. - Extremely pseudocapacitive interface engineered CoO@3D-NRGO hybrid anodes for high energy/ power density and ultralong life lithium-ion batteries. carbon 171, 869-881, 2021. DOI: 10.1016/j.carbon.2020.09.058
  • Wang, J.; Xu, G.; Zeng, X.; Llorca, J.; Cui, Y. - Exploring the correlation between solvent diffusion and creep resistance of Mg-Ga HCP alloys from high throughput liquid-solid diffusion couple. materials & design 197, 109243, 2021. DOI: 10.1016/j.matdes.2020.109243
  • Boukella, A..K.; Rouby, M.; Debierre, J.-M. - Tip dynamics for equiaxed Al-Cu dendrites in thin samples : Phase-field study of thermodynamic effects. computational materials science 186, 110051, 2021. DOI: 10.1016/j.commatsci.2020.110051
  • Li, G.; Jadhav, S.D.; Martín, A.; Montero-Sistiaga, M.L.; Soete, J.;San Sebastian, M.; Cepeda-Jiménez, C.M.; Vanmeensel, K. - Investigation of Solidification and Precipitation Behavior of Si-Modified 7075 Aluminum Alloy Fabricated by Laser-Based Powder Bed Fusion. metallurgical and materials transactions a 52, 194-210, 2021. DOI: 10.1007/s11661-020-06073-9
  • Liu, Z.; Snel, J.; Boll, T.; Wang, J.Y.; Monclús, M.A.; Molina-Aldareguía, J.M.;Llorca, J. - High temperature strength retention of Cu/Nb nanolaminates through dynamic strain ageing. materials science & engineering: a 799, 140117, 2021. DOI: 10.1016/j.msea.2020.140117
  • Acuña, P.; Zhang, J.; Yin, G-Z.; Liu, X-Q.; Wang, D-Y. - Bio-based rigid polyurethane foam from castor oil with excellent flame retardancy and high insulation capacity via cooperation with carbon-based materials. journal of materials science 56, 2684-2701, 2021. DOI: 10.1007/s10853-020-05125-0
  • Boehlert, C.J.; Sabirov, B.; Ruiz-Palenzuela, B.; Cornide, J.; Ruiz-Navas, E.M. - A comparison of field assisted hot pressing and hot isostatic pressing for gas atomized Ti-22Al-26Nb(at.%) and Ti-22Al-26Nb-5B(at.%) powders. journal of alloys and compounds 852, 156870, 2021. DOI: 10.1016/j.jallcom.2020.156870
  • Shia, Z.; Shao, W.; Rao, L.; Hu, T.; Xing, X.; Zhou, Y.; Liu, S.; Yanga, Q. - Effects of Ce doping on mechanical properties of M7C3 carbides in hypereutectic Fe-Cr-C hardfacing alloy. journal of alloys and compounds 850, 156656 - 1-156656 - 10, 2021. DOI: 10.1016/j.jallcom.2020.156656
  • 2020

  • Boehlert, C. J.; Hernandez-Escobar, D.; Ruiz-Palenzuela, B.; Sabirov, I; Cornide, J.; E.M. Ruiz-Navas - The effect of microstructure and strain rate on the 25 °C and 700 °C compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8 TiB2 (vol%) alloy. materials characterization 172, 110856, 2020. DOI: 10.1016/j.matchar.2020.110856
  • Rubio, S.; Maça, R.R.; Ortiz, G.F.; Pérez Vicente, C.; Lavela, P.; Etacheri, V.; Tirado, J.L. - Iron Oxide-Iron Sulfide Hybrid Nanosheets as High-Performance Conversion-Type Anodes for Sodium-Ion Batteries. acs applied energy materials 3, 10765-10775, 2020. DOI: 10.1021/acsaem.0c01814
  • Garrido-Miranda, K.; Rivas, Bernabé L. Q.; Pérez-Rivera, M. A.; Fernández-Blázquez, J. P.; Monclús, M.; Peña-Farfal, C. - Mechanical and morphological properties of poly(3-hydroxybutyrate)-thermoplastic starch/clay/eugenol bionanocomposites. chilean chemical society 65, 4992-4997, 2020. DOI: 10.4067/S0717-97072020000404992.
  • Hernándeza, T.; Sáncheza, F.J.; Moroño, A.; León-Gutiérrez, E.; Panizo-Laiz, M.; Monclus, M.A. González-Arrabal, R. - Corrosion behavior of diverse sputtered coatings for the helium cooled pebbles bed (HCPB) breeder concept. nuclear materials and energy 25, 2020. DOI: 10.1016/j.nme.2020.100795
  • Wang, Z.; Zhang, J.; Ma, A.; Hartmaier, A.; Yan, Y.; Sun, T. - On the crystallographic anisotropy of plastic zone size in single crystalline copper under Berkovich nanoindentation. materials today communications 25, 101314, 2020. DOI: 10.1016/j.mtcomm.2020.101314
  • Yusuf, A.; Avvaru, V.S.; Dirican, M.; Changchun, S.; Wanga, D.-Y. - Low heat yielding electrospun phosphenanthrene oxide loaded polyacrylonitrile composite separators for safer high energy density lithium-ion batteries. applied materials today 20, 100675, 2020. DOI: 10.1016/j.apmt.2020.100675
  • Gussone, J.; Bugelniga, K.; Barriobero-Vila, P.; da Silva, J.C.; Hecht, U.; Dresbach, Ch.; Sket, F.; Cloetens, P.; Stark, A.; Schell, N.; Haubrich, J.; Requena, G. - Ultrafine eutectic Ti-Fe-based alloys processed by additive manufacturing – A new candidate for high temperature applications. applied materials today 20, 100767, 2020. DOI: 10.1016/j.apmt.2020.100767
  • Alvaredo-Atienza, A.; Chen, L.; San-Miguel, V.; Ridruejo, A.; Fernández-Blázquez, J.P. - Fabrication and Characterization of PEEK/PEI Multilayer Composites. polymers 12, 2765, 2020. DOI: 10.3390/polym12122765
  • Yue, H.; Zheng, Y.; Zheng, P.; Guo, J.; Fernández-Blázquez, J.P.; Clark, J.H.; Cui, Y. - On the improvement of properties of bioplastic composites derived from wasted cottonseed protein by rational cross-linking and natural fiber reinforcement. green chemistry 22, 8642-8655, 2020. DOI: 10.1039/D0GC03245J
  • Tourret, D.; Sturz, L.; Viardin, A.; Založnik, M. - Comparing mesoscopic models for dendritic growth. materials science and engineering iop conference series 861, 012002, 2020. DOI: 10.1088/1757-899X/861/1/012002
  • Isensee, T.; Tourret, D. - Three-dimensional needle network model for dendritic growth with fluid flow. iop conference series: materials science and engineering 861, 012049, 2020. DOI: 10.1088/1757-899X/861/1/012049
  • González, C.; Fernández-León, J. - A Machine Learning Model to Detect Flow Disturbances during Manufacturing of Composites by Liquid Moulding. journal of composite science 4, 71, 2020. DOI: 10.3390/jcs4020071
  • Ou, Y.; González, C.; Vilatela, J.J. - Understanding interlaminar toughening of unidirectional CFRP laminates with carbon nanotube veils. composites part b-engineering 201, 108372, 2020. DOI: 10.1016/j.compositesb.2020.108372
  • Vila, M.; Rubio-Zuazo, J.; Lucas, I.; Magén, C.; Prados, A.; Salas-Colera, E.; Arnay, I.; Rafael-Castr, R. - Ferromagnetic epitaxial Cr2O3 thin films grown on oxide substrates by Pulsed Laser Deposition. applied surface science 534, 147638, 2020. DOI: 10.1016/j.apsusc.2020.147638
  • Martínez-Muíño, A.; Rana, M.; Vilatela, J.J.; Costa, R.D. - Origin of the electrocatalytic activity in carbon nanotube fiber counter-electrodes for solar-energy conversion. nanoscale advances 2, 4400-4409, 2020. DOI: 10.1039/D0NA00492H
  • Zhang, L.; Zhang, J.; Wang, D.-Y. - Hierarchical layered double hydroxide nanosheets/phosphorus-containing organosilane functionalized hollow glass microsphere towards high performance epoxy composite: Enhanced interfacial adhesion and bottom-up charring behavior. polymers 210, 2020. DOI: 10.1016/j.polymer.2020.123018
  • Pan, Y.‐T.; Yuan, Y.; Wang, D.-Y.;Yang, R. - An Overview of the Flame Retardants for Poly(vinyl chloride): Recent States and Perspective(dagger). chinese journal of chemistry 38, 1870-1896, 2020. DOI: 10.1002/cjoc.202000375
  • García-Gomez, I.; Haranczyk, M - Toward crystalline porosity estimators for porous molecules. crystengcomm 22, 7242-7251, 2020. DOI: 10.1039/C9CE01753D
  • Lilli, M.; Sarasini, F.; Di Fausto, L.; González, C.; Fernández, A.; Saúl-Lopes, C.; Tirillò, J. - Chemical Regeneration of Thermally Conditioned Basalt Fibres. applied science 10, 6674, 2020. DOI: 10.3390/app10196674
  • Schalnatat, J.; Garoz-Gómez, D.; Daelemans, L.; De Baere, I.; De Clerck, K.; Van Paepegema, W. - Influencing parameters on measurement accuracy in dynamic mechanical analysis of thermoplastic polymers and their composites. polymer testing 91, 106799, 2020. DOI: 10.1016/j.polymertesting.2020.106799
  • De Pablos, J.L.; Menga, E.; Romero, I. - A Methodology for the Statistical Calibration of Complex Constitutive Material Models: Application to Temperature-Dependent Elasto-Visco-Plastic Materials. materials 13, 4402, 2020. DOI: 10.3390/ma13194402
  • Meza, A.; Macia, E.; Garcia-Junceda, A.; Antonio Diaz, L.; Chekhonin, P.; Altstadt. E.; Serrano, M.; Rabanal, M.E.; Campos, M. - Development of New 14 Cr ODS Steels by Using New Oxides Formers and B as an Inhibitor of the Grain Growth. metals 10, 1344, 2020. DOI: 10.3390/met10101344
  • Schäufele, R.S.; Vazquez-Pufleau, M.; Vilatela, J.J. - Tough sheets of nanowires produced floating in the gas phase. materials horizons 7-2984, 2020. DOI: 10.1039/d0mh00777c
  • Wang, Z.J.; Liu, S.; Qiu, Z. X.; Sun, H.Y.; Liu, W.C. - A Study of the Microstructure, Texture and Tensile Properties of 1060/Al-TiC/1060 Sandwich Composites Prepared by Hot-Roll Bonding. metallurgical and materials transactions a 51, 6714-6726, 2020. DOI: 10.1007/s11661-020-06044-0
  • Monclús, M. A., Yang, L., López-Cabañas, I., Castillo-Rodríguez, M., Zaman, A., Wang, J., Meletis, E. I., González-Arrabal, R., Llorca, J. and Molina-Aldareguía, J. M. - High temperature mechanical properties and microstructure of hard TaSiN coatings. materials science & engineering: a 797, 139976, 2020. DOI: 10.1016/j.msea.2020.139976
  • Barzegar, M.; Costa, J.; Lopes, C.S. - High-fidelity computational micromechanics of first-fibre failure in unidirectional composites: Deformation mechanisms and stress concentration factors. international journal of solids and structures Volumes 204–205, 18-33, 2020. DOI: 10.1016/j.ijsolstr.2020.08.005
  • Yang, L.W.; Mayer, C.R.; Chawla, N.; Llorca, J.; Molina-Aldareguía, J.M. - Nanomechanical characterization of the fracture toughness of Al/SiC nanolaminates. extreme mechanics letters 40, 100945, 2020. DOI: 10.1016/j.eml.2020.100945
  • Rueda-Ruiz, M.; Monclús, M. A.; Beake, B.D.; Gálvez, F.; Molina-Aldareguia, J.M - High strain rate compression of epoxy micropillars. extreme mechanics letters 40, 100905, 2020. DOI: 10.1016/j.eml.2020.100905
  • Zhang, L.; Li, Z.; Wang, D.-Y. - Polydopamine-assisted strategies for preparation of fire-safe polymeric materials: A review. european polymer journal 138, 109973, 2020. DOI: 10.1016/j.eurpolymj.2020.109973
  • Boaretto, N.; Rana, M.; Marcilla, R.; Vilatela, J.J. - Revealing the Mechanism of Electrochemical Lithiation of Carbon Nanotube Fibers. acs applied energy materials 2020, 8695-8705, 2020. DOI: 10.1021/acsaem.0c01267
  • Liu, S.; Esteban-Manzanares, G.; Llorca, J. - First-principles analysis of precipitation in Mg-Zn alloys. physical review materials 4, 093609, 2020. DOI: 10.1103/physrevmaterials.4.093609
  • Lilli, M.; Ross, E.; Tirillò, J.; Sarasi, F.; Fausto, L.D.; Valente, T.; González, C.; Fernández, A.; Saúl, C.; Lopes, C.S.; Moscate, R.; Bemporad, E. Sebastiani, M. - Quantitative multi-scale characterization of single basalt fibres: Insights into strength loss mechanisms after thermal conditioning. materials science & engineering: a 797, 139963, 2020. DOI: 10.1016/j.msea.2020.139963
  • Xia, P.; Canillas-Rodríguez, F.J.; Sabirov, I. - Microstructure evolution and adiabatic heating during dynamic biaxial deformation of a 304 stainless steel. materials science and engineering: a 793, 139829, 2020. DOI: 10.1016/j.msea.2020.139829
  • Wan, J.; Zhao, J.; Zhang, X.; Fan, H.; Zhang, J.; Hu, D.; Jin, P.; Wang, D.-Y. - Epoxy thermosets and materials derived from bio-based monomeric phenols: Transformations and performances. progress in polymer science 108, 101287, 2020. DOI: 10.1016/j.progpolymsci.2020.101287
  • Vilatela, J.J. - Materials Horizons Emerging Investigator Series: Juan José Vilatela, IMDEA Materials Institute, Spain. 10, 2477-2478, 2020. DOI: 10.1039/D0MH90064H
  • Castro, J; Sket, F; González, C. - S-XCT experimental determination of local contact angle and meniscus shape in liquid moulding of composites. composites science and technology 199, 108362, 2020. DOI: 10.1016/j.compscitech.2020.108362
  • Culebras, M.; Ren , G.; O'Connell, S.; Vilatela, J.J.; Collins, M.N. - Lignin Doped Carbon Nanotube Yarns for Improved Thermoelectric Efficiency. advanced sustainable systems , 2020. DOI: 10.1002/adsu.202000147
  • Herrera-Solaza, V.; Cepeda-Jiménez, C.M.; Pérez-Prado, M.T.; Segurado, J.; Niffeneggera, M. - The influence of underlying microstructure on surface stress and strain fields calculated by crystal plasticity finite element method. materials today communications 24, 101176-101176, 2020. DOI: 10.1016/j.mtcomm.2020.101176
  • Wang, Q.; Zhang, J.; Shi, W.; Castillo-Rodríguez, M.; Su, D.S.; Wang, D.-Y. - Coordinating mechanical performance and fire safety of epoxy resin via functionalized nanodiamond. diamond and related materials 108, 107964 - 1-107964 - 12, 2020. DOI: 10.1016/j.diamond.2020.107964
  • Li, Y.-M.; Hu, S.-L.; Wang, D.-Y. - Polymer-based ceramifiable composites for flame retardant applications: A review. composites communications 21, 100405 - 1-100405 - 18, 2020. DOI: 10.1016/j.coco.2020.100405
  • Bia, Q.; Yao, D.; Yin, G.-Z.; You, J.; Li, X.-Q.; Wang, N.; Wang, D.-Y. - Surface engineering of magnesium hydroxide via bioinspired iron-loaded polydopamine as green and efficient strategy to epoxy composites with improved flame retardancy and reduced smoke release. reactive and funcional polymers 155, 104690, 2020. DOI: 10.1016/j.reactfunctpolym.2020.104690
  • Camarena-Maese, F.J.; Martínez-Hergueta, F.; Fernández-Blázquez, J.P.; Kok, R.W.; Reid, J.; Callanan, A. - Multiscale SAXS/WAXD characterisation of the deformation mechanisms of electrospun PCL scaffolds. polymer 203, 122775 - 1-122775 - 12, 2020. DOI: 10.1016/j.polymer.2020.122775
  • Zhang, Z.; Li, Z.; Shao, Z-B.; Zhang, L.; Wang, D.Y. - Hierarchically tailored hybrids via interfacial-engineering of self-assembled UiO-66 and prussian blue analogue: Novel strategy to impart epoxy high-efficient fire retardancy and smoke suppression. chemical engineering journal 400, 125942 - 1-125942 - 12, 2020. DOI: 10.1016
  • Hangfeng, Y.; Hangbo, Y.; Xi, Z.; Minzimo, S.; Jianwei, G.; Cui, Y.; Fernández-Blazquez, J.P.; Wang, D.-Y.. - Polycarbonate/Sulfonamide Composites with Ultralow Contents of Halogen-Free Flame Retardant and Desirable Compatibility. materials 13, 3656 -1-3656 - 12, 2020. DOI: 10.3390/ma13173656
  • Rueda-Ruiz, M.; Deakec, B.D.; Molina-Aldareguia, J.M. - New instrumentation and analysis methodology for nano-impact testing. materials & design 192, 108715 - 1-108715 - 12, 2020. DOI: 10.1016
  • Zhang, J.; Li, L.; , Qi, X-L.; Wang, D-Y. - Recent Progress on Metal-Organic Framework and Its Derivatives as Novel Fire Retardants to Polymeric Materials. 173, 1-21, 2020. DOI: 10.1007/s40820-020-00497-z
  • Salavagione, H.J.; Shuttleworth, P.S.; Fernández-Blázquez, J.F.; Ellis, G.J.; Gómez-Fatou, M.A. - Scalable graphene-based nanocomposite coatings for flexible and washable conductive textiles. carbon 167, 495-503, 2020. DOI:
  • Umuhire Mahoro, G.; Fernandez‐Cestau, J.; Renaud, J‐L.; Coto, P.B.; Costa, R.D.; Gaillard, S. - Recent Advances in Solid‐State Lighting Devices Using Transition Metal Complexes Exhibiting Thermally Activated Delayed Fluorescent Emission Mechanism. advanced optical materials 8, 2020. DOI: 10.1002/adom.202000260
  • Acuña, P.; Lin, X..; Calvo, M.S.; Shaoa, Z.; Péreza, N.; Villafañe, F.; Rodríguez-Pérez, M.A.; Wang, D.-Y. - Synergistic effect of expandable graphite and phenylphosphonic-aniline salt on flame retardancy of rigid polyurethane foam. polymer degradation and stability 179, 109274, 2020. DOI: 10.1016/j.polymdegradstab.2020.109274
  • Garcia-Abrego Ch.; Zaunz, S.; Toprakhisar, B.; Subramani. R.; Deschaume. O.; Jooken, S.; Bajaj, M.; Ramon, H.; Verfaillie, C.; Bartic, C.; Patterson, J. - Towards Mimicking the Fetal Liver Niche: The Influence of Elasticity and Oxygen Tension on Hematopoietic Stem/Progenitor Cells Cultured in 3D Fibrin Hydrogels. advanced functional materials 21, 6367 (1)-6367 (18), 2020. DOI: 10.3390/ijms21176367
  • Senokos, E.; Rana, M.; Vila, M.; Fernandez-Cestau, J.; Costa, R. D, Marcilla, R.; Vilatela, J.J. - Transparent and flexible high-power supercapacitors based on carbon nanotube fibre aerogels. nanoscale 32, 2020. DOI: 10.1039
  • Martinez-Hergueta, F.; Pellegrino, A.; Ridruejo, A.; Petrinic, N.; Gonzalez, C. ;Llorca, J. - Dynamic Tensile Testing of Needle-Punched Nonwoven Fabrics. applied science 10, 2020. DOI: 10.3390
  • Torralba, J.M.; Alvaredo, P.; Garcia-Junceda, A. - Powder metallurgy and high-entropy alloys: update on new opportunities. powder metallurgy 63, 227-236, 2020. DOI: 10.1080
  • Qibing, P.; Costa, R.D. - 25 Years of Light-Emitting Electrochemical Cells. advanced functional materials 30, 2020. DOI: 10.1002/adfm.202002879
  • Wang, N.; Liu, H.; Zhang, J.; Zhang, M.; Fang, Q.; Wang, D. - Synergistic effect of graphene oxide and boron-nitrogen structure on flame retardancy of natural rubber/IFR composites. arabian journal of chemistry 13, 6274-6284, 2020. DOI: 10.1016
  • Fresta, E.; Costa, R.C. - Advances and Challenges in White Light‐Emitting Electrochemical Cells. advanced functional materials 30, 2020. DOI: 10.1002/adfm.201908176
  • Duan, Y.; Ezquerro, C; Serrano, E; Lalinde, E; Garcia-Martinez, J.; Berenguer, J.R.; Costa, R.D. - Meeting High Stability and Efficiency in Hybrid Light-Emitting Diodes Based on SiO2/ZrO(2)Coated CsPbBr(3)Perovskite Nanocrystals. advanced functional materials , 2020. DOI: 10.1002
  • Sebaey, T. A.; Catalanotti, G.; Lopes, C. S.; O'Dowd, N. - Computational micromechanics of the effect of fibre misalignment on the longitudinal compression and shear properties of UD fibre-reinforced plastics. composite structures 248, 112487, 2020. DOI: 10.1016
  • Liu, F.; Xin, R.; Zhang, M-X.; Perez-Prado, M.T.; Liu, Q. - Evaluating the orientation relationship of prismatic precipitates generated by detwinning in Mg alloys. acta materialia 195-273, 2020. DOI: 10.1016
  • Liu, F.; Xin. R.; Zhang, M-X.; Pérez-Prado, M.T.; Liu, Q. - Evaluating the orientation relationship of prismatic precipitates generated by detwinning in Mg alloys. acta materialia 195-273, 2020. DOI: 10.1016
  • Liu, S.; Martínez, E.; Llorca, J. - Prediction of the Al-rich part of the Al-Cu phase diagram using cluster expansion and statistical mechanics. acta materialia 195, 317-326, 2020. DOI: 10.1016
  • Gebhardt, C. G., Romero, I - The Rotating Rigid Body Model Based on a Non-twisting Frame. journal of nonlinear science , 2020. DOI: 10.1007/s00332-020-09648-3
  • Sancho, R.: Segurado, J.; Erice, B.; Pérez-Martín, M-J.; Gálvez, F - Crystal-Plasticity-Finite-Element Modeling of the Quasi-Static and Dynamic Response of a Directionally Solidified Nickel-Base Superalloy. computational materials modelling 13, 2990, 2020. DOI: 10.3390
  • Cepeda-Jiménez, C.C; Potenza, F; Magalini, E; Luchin, V; Molinari, A; Pérez-Prado, M.T. - Effect of energy density on the microstructure and texture evolution of Ti-6Al-4V manufactured by laser powder bed fusion. materials characterization 163, 110238, 2020. DOI: 10.1016
  • Fernández-Luna, V.; Fernández-Blazquez ,J.P.; Monclus, M.A.; Rojo, F.J.; Daza, R.; Sanchez de Alcaráz, D.; Cortajarena, A.L.; Costa, R.D. - Biogenic fluorescent protein–silk fibroin phosphors for high performing light-emitting diodes. materials horizons 7, 1790-1800, 2020. DOI: 10.1039/D0MH00503G
  • Maça, R.R.; Cíntora, D.; Castillo Rodríguez, M.; Etacheri, V. - Nanointerface-driven pseudocapacitance tuning of TiO2 nanosheet anodes for high-rate, ultralong-life and enhanced capacity sodium-ion batteries. chemical engineering journal 391, 123598, 2020. DOI: 10.1016
  • Van der Giessen, E.; Schultz, P.A.; Bertin, N.; Bulatov, V.V.; Cai, W.; Csányi, G.; Foiles, S.M.; Geers, M.G.D.; González, C.; Hütter, M.; Kyun Kim, W.; Kochmann, D.M.; Llorca, J.; Mattsson, A.E.; Rottler, J.; Shluger, A.; Sills, R.B.; Steinbach, I.; Strachan, A.; Tadmor, E.B. - Roadmap on multiscale materials modeling. modelling and simulation in materials science and engineering 28, 043001, 2020. DOI: 10.1088
  • Fresta, E.; Dosso, J.; Cabanillas-Gonzalez, J.; Bonifazi, D.; Costa, R.D. - Revealing the Impact of Heat Generation Using Nanographene-Based Light-Emitting Electrochemical Cells. 12, 28426-28434, 2020. DOI: 10.1021
  • Bellon, B.; Haouala, S.; LLorca, J. - An analysis of the influence of the precipitate type on the mechanical behavior of Al – Cu alloys by means of micropillar compression tests. acta materialia 194, 207-223, 2020. DOI: 10.1016
  • Wang, C. Y.; Cepeda-Jimenez, C. M.; Perez-Prado, M. T. - Dislocation-particle interactions in magnesium alloys. acta materialia 194-206, 2020. DOI: 10.1016