La Defensa Doctoral tendrá lugar el 10 de marzo a las 11:30 hr, en la "Sala Verde" (1ª planta) de "ETSI Caminos Canales y Puertos" La disertación se titula "Micromechanics based fatigue modeling using fast Fourier transform based homogenization". Ha sido supervisada por el Prof. Javier

Abstract Transmission of mechanical twins across grain boundaries in Mg is a mechanism that can facilitate intergranular crack propagation by providing a path to cracks along along the twin interface. Clearly, understanding twin transmission requires us to understand twin growth. Traditionally,

La Defensa Doctoral tendrá lugar el 7 de febrero a las 16:00 hr, en el Campus de Leganes de la Universidad Carlos III de Madrid.  Aula: Adoración de Miguel 1.2.C16 en el edificio Betancourt La disertación se titula "Development and characterization of advanced thin coatings on

Resumen: In metals and alloys, complex solidification microstructures, such as dendrites, arise from a subtle interplay between phenomena occurring at much different scales: from atom attachment kinetics to macroscopic transport of heat and species in the different phases. As such, solidification

Resumen: Magnesium (Mg) is a widely used material in industrial applications due its low weight, ductility and good mechanical properties. For clinical applications such as non-permanent implants Mg is considered as a good option because it is biodegradable and its degradation products are not

Abstract: Rechargeable lithium-ion (Li-ion) batteries have become one of the most convenient options for advanced energy storage technologies, getting to dominate the battery market. Nevertheless, they cannot satisfy the ever increasing demand of energy density that is needed for both nowadays and

La Defensa Doctoral tendrá lugar, a las 11:00 hr, el próximo jueves 19 de diciembre en la Sala de Seminarios del departamento de Materiales de la Escuela de Ingenieros de Caminos, UPM. La disertación se titula "High throughput screening of strength and creep properties in Mg-Zn alloys".

La Defensa Doctoral tendrá lugar, a las 12:30 hr, el próximo martes 17 de diciembre en la Sala de Seminarios del departamento de Materiales de la Escuela de Ingenieros de Caminos, UPM. La disertación se titula “Crystal Plasticity Simulation of the Thermo-mechanical Coupled Behavior in

ABSTRACT In this work, following Agoras et al. [1], we develop a homogenization procedure for particulate composites with elasto-viscoplastic constituents. By employing a standard time-discretization scheme for the local stress rate, we show that the associated time-incremental homogenization

Perovskites for hybrid light emitting devices Abstract: Nowadays, light-emitting diodes (LEDs) have been used in various areas, such as illumination, signals, automotive, mobile appliances, decoration, and so on. Many materials have been used for the LEDs. Perovskites, as a new type of

Polymer-protein phosphors for optoelectronic applications Resumen: Bio-hybrid light-emitting diodes (Bio-LEDs) are lighting devices merging inorganic light-emitting diodes with fluorescent proteins (FP) acting as both color down-conversion and encapsulation systems. This new lighting concept

Meeting climate targets with both eyes open: How can we meet the growing demand for materials without destroying the environment? Presenter: Dr Ana González Hernández (Emerson) – Sustainability and Decarbonisation Manager. Collaborator and Author: Dr Jonathan M. Cullen (Resource Efficiency

Outstanding Radiation Resistance of Tungsten-based High Entropy Alloys O. El-Atwani1, N. Li1, M. Li2, A. Devaraj3, J. K. S. Baldwin1, M. M. Schneider1, D. Sobieraj4, J. S. Wrobel4, D. D. Nguyen-Manh5, S. A. Maloy1, and E. Martinez6 1 Materials Science and Technology Division, Los Alamos

La Defensa Doctoral tendrá lugar, a las 11:00 hr, el próximo miercoles 6 de septiembre en "Sala Blanca" (primera planta) de la ETSI Caminos Canales y Puertos. La disertación se titula “Atomistic modeling of the strengthening mechanisms in FCC and HCP metals”. Ha sido supervisada por el Prof.

Abstract: The project topic is gas phase intercalation of carbon nanotube fibers (CNTFs), with the intention of enhancing their conductivity without introducing defects in the carbon lattice. Furthermore, the main structural parameters of bundles of carbon nanotubes required for an homogeneous

The aeronautical structures manufactured by composite laminates experience damage as a result of the severe thermal and chemical conditions to which they are subjected during flight. Microcracks are one of the most common manifestations in terms of damage. Therefore, the study of its generation and

El próximo 24 de Octubre acogeremos la siguiente reunión de “Women in 3 Printing”,a las 17:45. Algunos de nuestros investigadores presentarán los proyectos en los que están trabajando, y posteriormente se realizará una visita a las instalaciones del instituto. Muchas gracias a María Teresa Pérez

Abstract The commercial aviation industry is a field of innovation and vanguard technology application, in which competitiveness is a critical need. As a consequence, new materials and techniques take place continuously with the purpose of creating a significant advantage in relation to other

Resumen: Dye-Sensitized Solar Cells (DSSCs) are a promising alternative to Si solar cells, with efficiencies of 14% under sunlight and 28.9% under ambient light. DSSCs’ components can separately be optimized. One of the major challenges is replacing Pt-counter-electrode (CE), due to its

La Defensa Doctoral tendrá lugar, a las 11:00 hr, el próximo lunes 16 de septiembre en el aula adoración de Miguel 1.2.c.16 de la Universidad Carlos III de Leganes. La disertación se titula “Wettability and infiltración of liquid Silicon on serveral substrates”.  Ha sido supervisada por el

Abstract: Carbon nanotubes, graphene and graphene oxides have been under development due to their suitable properties to be applied in electrochemical energy devices such as supercapacitors, batteries and fuel cells. Recently, carbon nanostructures doped with heteroatoms have demonstrated to play

La Defensa Doctoral tendrá lugar, a las 12:00 hr, el próximo miercoles 11 de septiembre en la Sala de Seminarios de la Universidad Caminos, Puertos y Canales de la UPM. La disertación se titula “High throughput investigation of diffusion and solid solution hardening of HCP Mg alloys”.  Ha

La Defensa Doctoral tendrá lugar, a las 12:00 hr, el próximo lunes 29 de julio en la Sala Verde de Caminos, Puertos y Canales de la UPM. La disertación se titula “A study of the factors influencing air removal in Out-of-Autoclave processing of composites”. Ha sido supervisada por el Prof. Carlos