La defensa de la tesis doctoral se llevará a cabo en la sala 3.S01.08, Edificio Rey Pastor (biblioteca), Universidad Carlos III de Madrid - Campus de Leganés. Ha sido asesorada por los profesores J. LLorca y C. González.

Resumen: The demand for advanced clinical treatments for various soft and hard tissue injuries and diseases has led to the development of innovative biodegradable implant materials. Compared to their non-degrading counterparts, implants made of biodegradable polymers or metals degrade

Resumen: Solid state lithium ion batteries are promising as the next-generation energy storagesystem due to their high energy density, thermal stability, and volumetricminiaturization. Even though, the ionic conductivity of solid state electrolytes is oftenblamed to be the bottle neck of the

La defensa de la tesis doctoral se llevará a cabo en la "Sala Verde de la ETSICCP (Escuela Técnica Superior de Ingenieros de Caminos, Canales y Puertos) de la UPM".La disertación "Dimensional stability of Carbon Fibre Reinforced Polymers prepared by Infusion Processes". Ha sido asesorada por el

Resumen: Epoxy resin adhesive mainly consists of two parts: epoxy resin and curing agent. The currently commonly used ones are epoxy thermosetting resins derived from fossil resources, which have a permanent cross-linked structure and can only be used once, cannot be further processed, and cannot

Resumen: In this presentation, I will describe how data science, machine learning (ML) and high-throughput synthesis can be combined to achieve accelerated development and discovery of solid-state materials for energy applications. I will describe 6S, a self-sintered scalable solid-state

La defensa de tesis doctoral se llevará a cabo a las 11:30 am del 15 de marzo en la sala "ESTI Caminos, Canales y Puertos de la UPM", ubicada en el Departamento de Ciencia de Materiales. ¡Nuestros mejores deseos para él!

Resumen: Porous metals are increasingly important in technology. Due to their tunable me- chanical properties, they are promising candidates in various emerging applications such as metallic scaffolds for load-bearing bones, lightweight structures for trans- port technologies, electrodes for

Resumen: The high standards and requirements demanded in high-speed machining (HSM) applications some examples are the precise manufacturing of microelectronics circuits or biomedical devices - comprise a delicate control of the tool preparation as well as coatings design and finish, which are

Resumen: The applications of Li-ion batteries (LIBs) vary widely from the transport sector (viz. electric vehicles, aircraft, robotics, drones, etc.) to battery energy storage technologies supporting and strengthening the power grid to mitigate the problem of intermittency of renewable energy

Resumen: Clear aligner treatment (CAT) is a new technique to treat malocclusions which ison current expansion along the globe and also gaining importance in oral medicine.Oral diseases are the third most expensive medical treatment in accumulatednumbers yearly in Europe, and the most spread oral

Resumen A general theory of triboelectric nanogenerators (TENGs) is presented for an arbitrary geometric setup consisting of two electrodes, a fixed dielectric, and a moving dielectric [1]. The two dielectric materials have opposite charges. Optimization of power output is computed for a general

La defensa de la tesis tendrá lugar en la sala José Echegaray de la E.T.S de Ingenieros de Caminos (C/Profesor Aranguren 3), 28040 Madrid. La tesis se titula "Efecto de los límites de grano en la deformación y fractura de policristales metálicos". Ha sido asesorada por el Prof. Javier LLorca del

La defensa doctoral tendrá lugar a las 11:00 en la Aula - 1.A.02 - Biblioteca de la Universidad Carlos III (Campus Puerta de Toledo). Cómo llegar: https://www.uc3m.es/about-uc3m/how-to-get-here/madrid-puerta-de-toledo. La disertación se titula "Medical Grade Bioabsorbable Composites for the 3D

El 2nd Seminario Internacional sobre Modelización, Simulación y Aprendizaje Automático para el rápido desarrollo de materiales porosos tiene como objetivo reunir a científicos jóvenes y seniors, pertenecientes a diferentes comunidades científicas dedicadas a la comprensión fundamental de los

La defensa doctoral tendrá lugar a las 11:00 en la UPM Caminos, Canales y Puertos. La disertación se titula «Highly Sensitive Smart Sensor for Early Fire Warning Detection». La tesis fue supervisada por el Prof. De-Yi Wang y el presidente del comité es el Prof. Carlos González. Aquí tienes

Resumen: The current hydrogen economy is in a phase marked by the low rate and efficiency of the hydrogen production from water and the energy generation by hydrogen oxidation into water. This first yearassessment explores the possibility of exploiting the change of electronical configuration due

Resumen: The Interrelated aspects of thermo-mechanical behavior with a specific focus on microstructural characteristics and defects, such as partial and total dislocations densities and grain-boundaries (GBs) that span the nano to the micro, and how these characteristics affect failure modes,

Resumen: The delicate alveolar structure of the mammalian lungs is stabilized against forces tending to its collapse, thanks to the coating of a complex lipid-protein network assembled by the pulmonary surfactant system. This material, assembled and secreted by type II pneumocytes, prevents the

Resumen: The equiatomic CoCrFeMnNi high entropy alloy (HEA) and its derivatives have attracted attention fromscientific community due to their mechanical properties, also at cryogenic conditions. Extensivemechanical twinning is mainly responsible for their outstanding mechanical response under

Resumen: The on-going energy crisis demands extensive research into new alternatives for enhancing the energy efficiency in electric motors. As a probable solution to this, soft magnetic materials (SMM) portray excellent properties with high saturation magnetisation (JS) and low coercivity

Resumen: Modern technology demands the development of strong and flame-resistant multifunctional thermoplastic-based nanocomposites that are also compatible with three-dimensional (3D) printing, as this method has become a standard production process in essential industries. This study tackles

Resumen Modeling the damage and fracture of materials has been a recurrent topic in solid mechanics and materials engineering in the last century. In the present there is a strong interest to extend these studies to model complex multiphysical problems including explicitly the effect of the

Resumen: The active materials used in current LIBs fall short in energetic terms due to their limited uptake of Li, so further development of these materials is needed. In contrast to the insertion materials usually used in the LIBs, alloy materials are not restricted by the sites in the host

Abstract: Nanocomposite materials based on a polymer matrix and nanomaterials (as Graphene Nanoplateletes, 2D clays or Metal Organic Frameworks) acting as additives are an exciting type of materials that bring the opportunity to create plastics with better properties (mechanical, thermal,

La Defensa de Doctorado tendrá lugar a las 12:00h , en el Salón de Grados de la ETSI de Informáticos de la UPM (Campus de Montegancedo, Boadilla). La disertación se titula "Advanced deep Learning technologies for the smart manufacturing of structural composites". Fue asesorada por el Prof.

Resumen: Titanium alloys are widely employed in aerospace applications owing to superior properties such as a high specific strength and a good corrosion resistance. In particular, the variety of dual phase microstructures obtained through different thermo-mechanical processing routes enables

Resumen: Functional and structural parts, made so far with metals, have been progressively reengineeredby replacing metallic materials by discontinuous fibre reinforced polymers and continuous fibrereinforced composites. Polymer composites are usually divided into two groups, advanced (orhigh

Abstract: Floating Catalyst Chemical Vapor Deposition (FCCVD) is a method for the synthesis of 1D nanoparticles, i.e., nanotubes and nanowires, in the aerosol phase. Specifically, 1-D nanoparticles grow on the surface of spherical catalyst nanoparticles while floating through a gas reactor. An

Resumen: Reconstructing the morphology of aerogels presents significant challenges if 3D visualizations of their mesoporous nanostructure are desired. Available microscopic and tomographic tools find it difficult to probe into all types of aerogels for the purposes of reconstructing their 3D

Resumen: We all are very familiar with graphene and carbon nanotubes and their extraordinary electronic and mechanical properties. Both materials are composed of sp2 carbon atoms; their structures look very similar locally but exhibit different properties due to the way their atoms are arranged

Resumen: Systems with broken continuous symmetry in ideal lattices cannot be rectified through rearrangement or deformation. Topological metamaterials featuring nontrivial, artificially induced phase transitions have emerged as pivotal constituents for engineering these topological defects,

La Defensa de Doctorado tendrá lugar a las 10:30 am, en el Aula de Grados (Edificio Padre Soler), Universidad Carlos III de Madrid-Leganés Campus, Madrid. La disertación se titula "Development of Ti-Fe-based powders for laser additive manufacturing of ultrafine lamellar eutectics". Fue

La Defensa de Doctorado tendrá lugar a las 11:30 am, en el edificio Concepción Arenal, sala 14.0.11, Universidad Carlos III de Madrid – Campus de Getafe. La defensa tendrá una parte pública y otra confidencial. La disertación se titula "Binder Jetting: A Microstructural Perspective". Fue