La defensa doctoral tendrá lugar a las 11:00 en la Aula - 1.A.02 - Biblioteca de la Universidad Carlos III (Campus Puerta de Toledo). Cómo llegar: https://www.uc3m.es/about-uc3m/how-to-get-here/madrid-puerta-de-toledo. La disertación se titula "Medical Grade Bioabsorbable Composites for the 3D

El 2nd Seminario Internacional sobre Modelización, Simulación y Aprendizaje Automático para el rápido desarrollo de materiales porosos tiene como objetivo reunir a científicos jóvenes y seniors, pertenecientes a diferentes comunidades científicas dedicadas a la comprensión fundamental de los

La defensa doctoral tendrá lugar a las 11:00 en la UPM Caminos, Canales y Puertos. La disertación se titula «Highly Sensitive Smart Sensor for Early Fire Warning Detection». La tesis fue supervisada por el Prof. De-Yi Wang y el presidente del comité es el Prof. Carlos González. Aquí tienes

Resumen: The current hydrogen economy is in a phase marked by the low rate and efficiency of the hydrogen production from water and the energy generation by hydrogen oxidation into water. This first yearassessment explores the possibility of exploiting the change of electronical configuration due

Resumen: The Interrelated aspects of thermo-mechanical behavior with a specific focus on microstructural characteristics and defects, such as partial and total dislocations densities and grain-boundaries (GBs) that span the nano to the micro, and how these characteristics affect failure modes,

Resumen: The delicate alveolar structure of the mammalian lungs is stabilized against forces tending to its collapse, thanks to the coating of a complex lipid-protein network assembled by the pulmonary surfactant system. This material, assembled and secreted by type II pneumocytes, prevents the

Resumen: The equiatomic CoCrFeMnNi high entropy alloy (HEA) and its derivatives have attracted attention fromscientific community due to their mechanical properties, also at cryogenic conditions. Extensivemechanical twinning is mainly responsible for their outstanding mechanical response under

Resumen: The on-going energy crisis demands extensive research into new alternatives for enhancing the energy efficiency in electric motors. As a probable solution to this, soft magnetic materials (SMM) portray excellent properties with high saturation magnetisation (JS) and low coercivity

Resumen: Modern technology demands the development of strong and flame-resistant multifunctional thermoplastic-based nanocomposites that are also compatible with three-dimensional (3D) printing, as this method has become a standard production process in essential industries. This study tackles

Resumen Modeling the damage and fracture of materials has been a recurrent topic in solid mechanics and materials engineering in the last century. In the present there is a strong interest to extend these studies to model complex multiphysical problems including explicitly the effect of the

Resumen: The active materials used in current LIBs fall short in energetic terms due to their limited uptake of Li, so further development of these materials is needed. In contrast to the insertion materials usually used in the LIBs, alloy materials are not restricted by the sites in the host

Abstract: Nanocomposite materials based on a polymer matrix and nanomaterials (as Graphene Nanoplateletes, 2D clays or Metal Organic Frameworks) acting as additives are an exciting type of materials that bring the opportunity to create plastics with better properties (mechanical, thermal,

La Defensa de Doctorado tendrá lugar a las 12:00h , en el Salón de Grados de la ETSI de Informáticos de la UPM (Campus de Montegancedo, Boadilla). La disertación se titula "Advanced deep Learning technologies for the smart manufacturing of structural composites". Fue asesorada por el Prof.

Resumen: Titanium alloys are widely employed in aerospace applications owing to superior properties such as a high specific strength and a good corrosion resistance. In particular, the variety of dual phase microstructures obtained through different thermo-mechanical processing routes enables

Resumen: Functional and structural parts, made so far with metals, have been progressively reengineeredby replacing metallic materials by discontinuous fibre reinforced polymers and continuous fibrereinforced composites. Polymer composites are usually divided into two groups, advanced (orhigh

Abstract: Floating Catalyst Chemical Vapor Deposition (FCCVD) is a method for the synthesis of 1D nanoparticles, i.e., nanotubes and nanowires, in the aerosol phase. Specifically, 1-D nanoparticles grow on the surface of spherical catalyst nanoparticles while floating through a gas reactor. An

Resumen: Reconstructing the morphology of aerogels presents significant challenges if 3D visualizations of their mesoporous nanostructure are desired. Available microscopic and tomographic tools find it difficult to probe into all types of aerogels for the purposes of reconstructing their 3D

Resumen: We all are very familiar with graphene and carbon nanotubes and their extraordinary electronic and mechanical properties. Both materials are composed of sp2 carbon atoms; their structures look very similar locally but exhibit different properties due to the way their atoms are arranged

Resumen: Systems with broken continuous symmetry in ideal lattices cannot be rectified through rearrangement or deformation. Topological metamaterials featuring nontrivial, artificially induced phase transitions have emerged as pivotal constituents for engineering these topological defects,

La Defensa de Doctorado tendrá lugar a las 10:30 am, en el Aula de Grados (Edificio Padre Soler), Universidad Carlos III de Madrid-Leganés Campus, Madrid. La disertación se titula "Development of Ti-Fe-based powders for laser additive manufacturing of ultrafine lamellar eutectics". Fue

La Defensa de Doctorado tendrá lugar a las 11:30 am, en el edificio Concepción Arenal, sala 14.0.11, Universidad Carlos III de Madrid – Campus de Getafe. La defensa tendrá una parte pública y otra confidencial. La disertación se titula "Binder Jetting: A Microstructural Perspective". Fue

La Defensa de Doctorado tendrá lugar a las 11:00 am, en la Sala Echegaray, E. T. S. de Ingenieros de Caminos, Ciudad Universitaria, Madrid. La disertación se titula "Facilitating development of special clays by incorporation of machine learning techniques". Fue asesorada por el Prof. J. LLorca y

Resumen, The structures of materials play a critical role in defining their unique properties and applications. In particular, the engineering of materials to enhance their performance or understand their defect, dislocation, impurity, or catalytic activity requires knowledge of atomistic-level

Resumen: Digital Light Processing (DLP)[1] is an additive manufacturing technology based on a Vat photopolymerisation process. 3D objects are manufactured layer upon layer by projecting 2D light patterns onto a liquid photocurable resin. This fast and accurate process is usually limited to

Resumen: The morphology of grains produced during metal Additive Manufacturing (AM) can be very different from that given by conventional processing and is central to controlling the properties of the final build. In addition, the interfacial velocities and temperature gradients found during AM

Resumen: ¿Qué papel ha jugado la metalurgia en el desarrollo tecnológico de nuestra civilización tal como la conocemos? ¿Cómo se vincula la metalurgia con las llamadas tecnologías verdes? ¿Cómo se relaciona la metalurgia con el desarrollo de nuevas formas de generar energía? ¿Qué desafíos