Resultados de búsqueda para: I

FYA de Sama Safarloo, titulado «Fabrication and Characterization of Sustainable High-Performance Iron-Based Alloys Through Powder Metallurgy Routes» – 24 de marzo de 2026 a las 11:30 en la sala de seminarios.

Resumen:  High-performance steels require alloying elements such as Ni, Mo, Ti, and Co to achieve their characteristic strength-ductility balance. However, these elements are considered critical due to their cost, scarcity, and environmental impact. An alternative approach is the use of large-scale

Dr. Rubén Pérez-Mañanes, de Hospital General Universitario Gregorio Marañón, dará un seminario titulado «Ingeniería y medicina personalizada: los hospitales como catalizadores de la innovación en materiales, dispositivos y tecnologías para la salud». Tendrá lugar el March 27, 2026, a las 12:30, en el Auditorium.

Bibliografía: Dr. Rubén Pérez-Mañanes es cirujano ortopédico oncológico en el Hospital General Universitario Gregorio Marañón, subdirector del Instituto de Investigación Sanitaria (IiSGM) y profesor asociado de la Universidad Complutense de Madrid. Desarrolla su actividad en el CSUR (Centros,

IMDEA Materials organizará su Open PhD Day virtual el 15 de abril.

El Instituto IMDEA Materials dará la bienvenida a los futuros candidatos a doctorado en nuestro Día Anual de Puertas Abiertas para Doctorados, que se llevará a cabo en línea el miércoles 15 de abril. Este evento ofrece a los estudiantes de España y de otros países la oportunidad de conocer las

Ricardo Lebensohn, de Los Alamos National Laboratory, dará un seminario titulado «Fast Fourier Transform (FFT)-Based Modelling of Microstructure/Property Relationships of Polycrystalline Materials». Tendrá lugar el 12 de mayo, a las 12:30, en la Seminar Room.

Resumen:  Crystal plasticity (CP) are well-established models, used, e.g., in scale-bridging applications to obtainmicrostructure-sensitive mechanical response of polycrystalline materials. These models require a properconsideration of the single crystal deformation mechanisms, a representative

Prof. Kaushik Bhattacharya, de la California Institute of Technology, dará un seminario titulado «Data-Driven Constitutive Relations». Tendrá lugar el lunes, 27 de abril, a las 12:30, en la Seminar Room.

Resumen:  The numerical simulation of the mechanical behavior of complex materials and systems remains a significant engineering challenge. Despite advances in computer architecture, multiscale modeling and machine learning, most complex simulations of materials use a constitutive model at

PhD Defense of Marcos Rodriguez, entitled “Laser powder bed fusion of soft magnetic metallic glasses. A fundamental study on the interplay between processing conditions, defects, microstructure and properties” – Friday 6th of March, 10:30

On Friday 6th of March, 10:30, Marcos Rodriguez will defend his doctoral thesis entitled “Laser powder bed fusion of soft magnetic metallic glasses. A fundamental study on the interplay between processing conditions, defects, microstructure and properties.” The PhD defence will be held at 10:30 on

On wednesday March 25th María Sansigre will give a Innovation talk entitled «from lab to venture: what investors look for – and how to build a fundable deep tech spin – off from day one». The innovation talk will take place in seminar room or auditorium at noon.

Abstract: Early-stage scientific breakthroughs rarely fail because of weak science; they do so because the path from lab to venture is not structured early enough. In this session, Maria Sansigre will address both sides of the equation: what investors look for in deep tech projects at very low

Nuevos materiales para alcanzar la eterna juventud

José Manuel Torralba, IMDEA MATERIALES Órganos artificiales, implantes que se absorben y se regeneran con nuestro propio hueso, miniórganos para replicar enfermedades y probar tratamientos antes de experimentar en seres vivos… ¿Alcanzaremos el sueño de la eterna juventud? Sin duda, la salud es

Defensa de tesis doctoral de Jorge Valilla, titulada «Additive Manufacturing of Functionally Graded Materials: Insights from Advanced Characterization and Computational Thermodynamics» – el 30 de enero de 2026, a las 10:30 h.

La defensa de la tesis doctoral se llevará a cabo en la Sala de Vídeo 3.S1.08, Edificio Biblioteca Rey Pastor.La disertación «Additive Manufacturing of Functionally Graded Materials: Insights from Advanced Characterization and Computational Thermodynamics» ha sido asesorada por el Dr. Damien Tourret

Dmytro Lesyk, del Centro de Fabricación Avanzada en Aeronáutica (CFAA) de la Universidad del País Vasco (EHU), dará un seminario titulado «Laser PBF Additive Manufacturing and Post-Processing Superalloys». Tendrá lugar el jueves 29, a las 10:00, en la Sala del Patronato.

Resumen: Laser powder bed fusion (LPBF) additive manufacturing of precise metal components for aerospace and biomedical applications using key powder materials with exceptional properties, such as Ti-, Ni-, and Co-based alloys, is a promising approach, given the possibility of reducing the part

El Prof. Jan G. Korvink, del Karlsruhe Institute of Technology, Alemania, dará un seminario titulado «High-resolution magnetic resonance on moving fluids, tissues, and insects». Tendrá lugar el 3 de febrero de 2026, a las 12:00 a.m., en el Auditorio.

Resumen: Our understanding of natural processes in the life sciences is very strongly dependent on our ability to observe in sufficient detail how an organism’s biochemical processes evolve, and how they connect to that organism’s overall behaviour. This is partially a technical issue, because we

FYA of Laura Rosso entitled “Design and development of metal halide perovskite for photocatalytic applications” – 21st January at 11:30 a.m. in the Seminar Room.

Abstract: Metal halide perovskites have attracted increasing attention in recent years due to their outstanding physico-chemical properties and excellent performance in diverse photocatalytic reactions. However, most studies focus on lead-based perovskites, whose toxicity has driven the search for

Professor Richard M. Hall, de University of Birmingham, dará un seminario titulado «Beyond the standard – the case for advanced testing of orthopaedic implants». Tendrá lugar el 10 de febrero de 2026, a las 12:00, en la sala de seminarios

Resumen:  Joint replacement is rightfully considered one of the most techno-clinical success stories of the latter part of the 20th Century with numerous patients particularly those of advancing years having improved quality of life. Despite the latest range of materials having substantially

Prof. Dr. Xiaoyu Ju, de la University of Science and Technology of China, dará un seminario titulado “Research on the Fire Characteristics and Prevention and Control Technologies of EVs in Underground Garages”. Tendrá lugar el 30 de enero, a las 11:30 h, en la Sala de Seminarios.

Resumen: With the growing number of electric vehicles (EVs) in underground parking garages, new fire risks emerge that are not adequately addressed by current safety standards. Our research tackles this urgent issue by developing a targeted fire suppression solution. Through full-scale experiments

Dr. Muhammad Naeem, del IMDEA Materials Institute, dará un seminario titulado “Decoding cryogenic deformation mechanisms through in-situ neutron and synchrotron diffraction”. Tendrá lugar el 22 de enero, a las 12:00, en el auditorio.

Resumen The performance of metallic materials under cryogenic conditions is critical for advancing technologies in aerospace, hydrogen economy, and superconductivity. However, designing alloys for these extreme environments is challenging due to the complex interplay of deformation mechanisms that

PhD Defense of Wei Tang, entitled “Construction of Efficient Intumescent Flame-Retardant Systems Based on Multi-Group Synergy: Properties and Mechanism in Polypropylene” – On January 23rd, 2026 at 10:30 AM.

The PhD defence will take place in Aula 225, Departamental I, Campus de Alcorcón. How to get there: Google Maps – Campus de Alcorcón (Universidad Rey Juan Carlos)https://www.google.com/maps/search/Campus+de+Alcorcón+Universidad+Rey+Juan+Carlos The dissertation is titled “Construction of Efficient

Doctoral Thesis Defence: Guillermo Domínguez – January 16, 2026

On January 16th, 2026, Guillermo Dominguez will defend his doctoral thesis entitled “Effects “of chemical composition, surface treatments, and processing technique on the corrosion and cytocompatibility of Zn and Mg alloys. It was advised by Prof. Javier Llorca and Dr. Mónica Echeverry The PhD

Seminario de Daniel Garcia-Gonzalez titulado: “Magneto-mechanics for biology: soft robotic platforms to control cellular mechanobiology”. El día 15 de enero, a las 12:00 pm, en la sala de Seminarios.

Resumen: Understanding how cells sense and respond to mechanical cues is a central challenge in mechanobiology, yet current experimental platforms offer limited control over dynamic and spatially heterogeneous mechanical environments. In this talk, I will introduce our work at the intersection of

Cómo evitar que nos sepulte la montaña de basura que generamos

Miguel Ángel Rodiel, IMDEA MATERIALES y José Manuel Torralba, IMDEA MATERIALES ¿Son los españoles adictos a la basura? No a la comida basura, ni a la “telebasura” que nos engancha a muchos por la tarde-noche, sino a la basura en sí: la que llena nuestros vertederos y, más allá, nuestros ríos,

Materialise Call 2026

IMDEA MATERIALS PROOF-OF-CONCEPT CALL 2026 - MATERIALISE​ GOAL AND DESCRIPTION​ There is a gap between the progress made through research funding and what industry and investors view as an interesting commercial opportunity. While researchers usually

Prof. Dr. Dan Xiao, de la Hochschule für Technik und Wirtschaft Dresden, dará un seminario titulado «High-performance Recyclable Fire Retardant Polymer Composites/Nanocomposites Enabled by Electron Beam Treatment». Tendrá lugar el 15 de diciembre de 2025, a las 11:30, en la Sala de Seminarios.

Resumen: Trillions of dollars of polymer products, such as wires and cables, hydrogels, tires, heat shrinkable films, wood plastic for floor, tubes, etching, disinfection, harm removal, 3D printing, and coating etc. have been recreated by electron beam (EB) technology every year. Over the past

Robots que inventan nuevos materiales

José Manuel Torralba, IMDEA MATERIALES ¿Qué pinta la inteligencia artificial en una fábrica de materiales? ¿Cómo puede ayudar a elegir la mejor combinación de ingredientes para lograr determinadas propiedades para los fines más diversos? Resulta que está siendo fundamental para poder digerir los

FYA de Nafiseh Mollaei titulado «In situ EBSD analysis of the deformation mechanisms of a Zn-1wt%Mg alloy manufactured by laser power bed fusion» – 24 de octubre de 2025 a las 12:00 en la sala de seminarios

Resumen:      Zinc and its alloys have been recently considered promising candidates for biodegradable implants due to their excellent biocompatibility and stable degradation rates, despite their low mechanical strength. Among advanced fabrication technologies for medical components, laser powder

Electric Machine

Patent details Status Spanish patent filed PCT Extension Inventors Juan José Vilatela García, Anastasiia Mikhalchan, Ana Inés de Isidro Gómez, David Camacho Pernil, Marta Isabel Ocaña Dominguez, Eva Novillo Diaz Application

Dr. Mert Celikin, de Universidad Colegio de Dublín, dará un seminario titulado «Platform technologies for targeted delivery of RNA therapeutics». Tendrá lugar el 3 de noviembre, a las 12:00, en la sala de seminarios.

Abstract: Since the advent of COVID-19 mRNA vaccines, mRNA has become one of the most promising nucleic acid therapeutics. However, a major challenge now is how to deliver mRNA to targeting cells effectively and increase mRNA expression yield but de-risk potential toxicity to expand its clinical

Dr. Ni Qianqian, de la Universidad Nacional de Singapore, dará un seminario titulado «Nucleic Acid Nanotechnologies for RNA Therapy and Genome Editing». Tendrá lugar el 14 de noviembre de 2025, a las 11:30, en la sala de seminarios

Resumen: Since the advent of COVID-19 mRNA vaccines, mRNA has become one of the most promising nucleic acid therapeutics. However, a major challenge now is how to deliver mRNA to targeting cells effectively and increase mRNA expression yield but de-risk potential toxicity to expand its clinical

FYA de Vittoria Squartecchia, titulado «Phase-Field Modeling of Magnesium Alloy Degradation for Biomedical Applications» – 27 de octubre a las 12:00 en la sala de seminarios.

Resumen: Biodegradable magnesium (Mg) alloys represent a promising class of materials for next-generation biomedical implants, particularly endoluminal devices. Their major limitation, however, lies in the difficulty of controlling corrosion in the aggressive physiological environment, where

FYA of Ahsan Kaleem titulada “Thermomechanical Models for Additive Manufacturing Processes: Theory and Implementation” – Tomará lugar el 10 de octubre a las 12:00 en la sala de seminarios.

Resumen: "Additive manufacturing processes are predominantly governed by complex thermomechanical interactions that critically influence the mechanical properties and the quality of the final product. This study first developed a mathematical framework of general small-strain thermo-mechanics

Charlas innovadoras titulado, «Crystal Semiconductor Technologies: from the crystal growth lab to the market» – Martes 9 de octubre a las 12:00 en la de seminario

Resumen In this talk, José Luis Plaza will briefly discuss the development of Crystal Semiconductor Technologies company, born at the Crystal Growth Laboratory of the Autonomous University of Madrid (LCC-UAM). He will introduce how the knowledge gained from more than 40 years of experience led to

Dr. Christos SOFRAS, investigador postdoctorado de EMPA, Suiza, dará un seminario titulado «Microstructure design by additive manufacturing». Tendrá lugar el 17 de octubre., a las 12:00, en la sala de Patronato.

Resumen: Beyond its capability to create intricate geometries, Laser Powder Bed Fusion (L-PBF) is a powerful tool for tailoring the microstructure of metallic materials. By carefully adjusting process parameters, L-PBF enables fine tuning of crystallographic textures – a particularly critical