Jabbari Taleghani, M. A.; Torralba, J. M.
Menú
Biaxial Deformation Behavior and Enhanced Formability of Ultrafine-Grained Pure Copper
Moreno-Valle, E. C.; Monclus, M. A.; Molina-Aldareguia, J. M.; Enikeev, N.; Sabirov, I.
Importance of twin defect formation created by solid-phase epitaxial growth: An atomistic study
Martin-Bragado, Ignacio
In situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd (wt%)
Boehlert, C. J.; Chen, Z.; Chakkedath, A.; Gutierrez-Urrutia, I.; Llorca, J.; Bohlen, J.; Yi, S.; Letzig, D.; Perez-Prado, M. T.
Understanding Si(111) solid phase epitaxial regrowth using Monte Carlo modeling: Bi-modal growth, defect formation, and interface topology
Martin-Bragado, Ignacio; Sklenard, Benoit
Modeling of {311} facets using a lattice kinetic Monte Carlo three-dimensional model for selective epitaxial growth of silicon
Martin-Bragado, Ignacio; Moroz, Victor
Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten
Valles, G.; Panizo-Laiz, M.; Gonzalez, C.; Martin-Bragado, I.; Gonzalez-Arrabal, R.; Gordillo, N.; Iglesias, R.; Guerrero, C. L.; Perlado, J. M.; Rivera, A.
Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design
Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J.
Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites
Mayer, C. R.; Yang, L. W.; Singh, S. S.; Llorca, J.; Molina-Aldareguia, J. M.; Shen, Y. L.; Chawla, N.
Synthesis of a Fe3O4 Nanosphere@Mg-Al Layered-Double-Hydroxide Hybrid and Application in the Fabrication of Multifunctional Epoxy Nanocomposites
Kalali, Ehsan Naderi; Wang, Xin; Wang, De-Yi
Strategy for severe friction stir processing to obtain acute grain refinement of an Al-Zn-Mg-Cu alloy in three initial precipitation states
Orozco-Caballero, A.; Hidalgo-Manrique, P.; Cepeda-Jimenez, C. M.; Rey, P.; Verdera, D.; Ruano, O. A.; Carreno, F.
An XFEM/CZM implementation for massively parallel simulations of composites fracture
Vigueras, Guillermo; Sket, Federico; Samaniego, Cristobal; Wu, Ling; Noels, Ludovic; Tjahjanto, Denny; Casoni, Eva; Houzeaux, Guillaume; Makradi, Ahmed; Molina-Aldareguia, Jon M.; Vazquez, Mariano; Jerusalem, Antoine
Computational study of atomic mobility for bcc phase in Ti-Al-Fe system
Chen, Yi; Li, Jinshan; Tang, Bin; Kou, Hongchao; Segurado, J.; Cui, Yuwen
Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension
Munoz, R.; Martinez, V.; Sket, F.; Gonzalez, C.; LLorca, J.
Relationship Between the 3D Porosity and beta-Phase Distributions and the Mechanical Properties of a High Pressure Die Cast AZ91 Mg Alloy
Biswas, Somjeet; Sket, Federico; Chiumenti, Michele; Gutierrez-Urrutia, Ivan; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria
Multiscale modelling of the morphology and spatial distribution of theta’ precipitates in Al-Cu alloys
Liu, H.; Bellon, B.; LLorca, J.
Sustainable, Biobased Silicone with Layered Double Hydroxide Hybrid and Their Application in Natural-Fiber Reinforced Phenolic Composites with Enhanced Performance
Li, Cheng; Wan, Jintao; Pan, Ye-Tang; Zhao, Peng-Cheng; Fan, Hong; Wang, De-Yi
Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials
Medina M, Carlos; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Melendrez, Manuel F.; Flores, Paulo; LLorca, Javier
Bio-based barium alginate film: Preparation, flame retardancy and thermal degradation behavior
Liu, Yun; Zhang, Chuan-Jie; Zhao, Jin-Chao; Guo, Yi; Zhu, Ping; Wang, De-Yi
Effect of anisotropic microstructure of a 12Cr-ODS steel on the fracture behaviour in the small punch test
Altstadt, E.; Serrano, M.; Houska, M.; Garcia-Junceda, A.
In silico design and screening of hypothetical MOF-74 analogs and their experimental synthesis
Witman, Matthew; Ling, Sanliang; Anderson, Samantha; Tong, Lianheng; Stylianou, Kyriakos C.; Slater, Ben; Smit, Berend; Haranczyk, Maciej
Effect of manganese and cobalt ions on flame retardancy and thermal degradation of bio-based alginate films
Liu, Yun; Zhao, Jin-Chao; Zhang, Chuan-Jie; Guo, Yi; Zhu, Ping; Wang, De-Yi
High temperature deformation mechanisms in pure magnesium studied by nanoindentation
Sanchez-Martin, R.; Zambaldi, C.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.
Comparative study on synergistic effect of LDH and zirconium phosphate with aluminum trihydroxide on flame retardancy of EVA composites
Kalali, Ehsan Naderi; De Juan, Sergio; Wang, Xin; Nie, Shibin; Wang, Rui; Wang, De-Yi
The influence of high grain boundary density on helium retention in tungsten
Valles, G.; Gonzalez, C.; Martin-Bragado, I.; Iglesias, R.; Perlado, J. M.; Rivera, A.
Finite element modeling of fretting wear scars in the thin steel wires: Application in crossed cylinder arrangements
Cruzado, A.; Urchegui, M. A.; Gomez, X.
An experimental study on the mechanism of texture evolution during hot-rolling process in a beta titanium alloy
Kou, Hongchao; Chen, Yi; Tang, Bin; Cui, Yuwen; Sun, Feng; Li, Jinshan; Xue, Xiangyi
Real time monitoring of click chemistry self-healing in polymer composites
Yue, H. -B.; Fernandez-Blazquez, J. P.; Beneito, D. F.; Vilatela, J. J.
Molecular dynamics modeling and simulation of void growth in two dimensions
Chang, H-J; Segurado, J.; Rodriguez de la Fuente, O.; Pabon, B. M.; Lorca, J. L.
Bounds for nonlinear composites via iterated homogenization
Ponte Castaneda, P.
Microstructure and thermostability of a W-Cu nanocomposite produced via high-pressure torsion
Edwards, D.; Sabirov, I.; Sigle, W.; Pippan, R.
Microtomographic investigation of damage in E911 steel after long term creep
Sket, F.; Dzieciol, K.; Borbely, A.; Kaysser-Pyzalla, A. R.; Maile, K.; Scheck, R.
Fire response of polyamide 6 with layered and fibrillar nanofillers
Cai, Guipeng; Dasari, Aravind; Yu, Zhong-Zhen; Du, Xusheng; Dai, Shaocong; Mai, Yiu-Wing; Wang, Jiyang
Structural composites for multifunctional applications: Current challenges and future trends
Gonzalez, C.; Vilatela, J. J.; Molina-Aldareguia, J. M.; Lopes, C. S.; LLorca, J.
Interfacial crystallization of isotactic polypropylene surrounding macroscopic carbon nanotube and graphene fibers
Abdou, John P.; Reynolds, Karina J.; Pfau, Michaela R.; van Staden, Justin; Braggin, Gregory A.; Tajaddod, Navid; Minus, Marilyn; Reguero, Victor; Vilatela, Juan J.; Zhang, Shanju
Temperature and stain rate effect on the deformation of nanostructured pure titanium
Rodriguez-Galan, D.; Sabirov, I.; Segurado, J.
Comparative study of the synergistic effect of binary and ternary LDH with intumescent flame retardant on the properties of polypropylene composites
Wang, Xin; Spoerer, Yvonne; Leuteritz, Andreas; Kuehnert, Ines; Wagenknecht, Udo; Heinrich, Gert; Wang, De-Yi
Bio-based nickel alginate and copper alginate films with excellent flame retardancy: preparation, flammability and thermal degradation behavior
Liu, Yun; Zhao, Jin-Chao; Zhang, Chuan-Jie; Guo, Yi; Cui, Li; Zhu, Ping; Wang, De-Yi
Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates
Lotfian, S.; Mayer, C.; Chawla, N.; Llorca, J.; Misra, A.; Baldwin, J. K.; Molina-Aldareguia, J. M.
Anisotropy of uni-axial and bi-axial deformation behavior of pure Titanium after hydrostatic extrusion
Moreno-Valle, E. C.; Pachla, W.; Kulczyk, M.; Savoini, B.; Monge, M. A.; Ballesteros, C.; Sabirov, I.
Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks
Hidalgo, J.; Abajo, C.; Jimenez-Morales, A.; Torralba, J. M.
Microstructure and hardness evolution in MAR-M247 Ni-based superalloy processed by controlled cooling and double heat treatment
Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat
Texture evolution and dynamic recrystallization in a beta titanium alloy during hot-rolling process
Chen, Yi; Li, Jinshan; Tang, Bin; Kou, Hongchao; Xue, Xiangyi; Cui, Yuwen
Understanding size effects on the strength of single crystals through high-temperature micropillar compression
Soler, Rafael; Wheeler, Jeffrey M.; Chang, Hyung-Jun; Segurado, Javier; Michler, Johann; Llorca, Javier; Molina-Aldareguia, Jon M.
Bio-based semi-aromatic polyamide/functional clay nanocomposites: preparation and properties
Shabanian, Meisam; Kang, Nianjun; Liu, Jianwen; Wagenknecht, Udo; Heinrich, Gert; Wang, De-Yi
Latent hardening size effect in small-scale plasticity
Bardella, Lorenzo; Segurado, Javier; Panteghini, Andrea; Llorca, Javier
Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N.
Lean alloys in PM: from design to sintering performance
Oro, R.; Campos, M.; Torralba, J. M.; Capdevila, C.
Effect of Cu-doped graphene on the flammability and thermal properties of epoxy composites
Liu, Yun; Babu, Heeralal Vignesh; Zhao, Jianqing; Goni-Urtiaga, Asier; Sainz, Raquel; Ferritto, Rafael; Pita, Marcos; Wang, De-Yi
Thermal oxidative degradation kinetics of novel intumescent flame-retardant polypropylene composites
Nie, Shibin; Zhou, Can; Peng, Chao; Liu, Lei; Zhang, Chi; Dong, Xiang; Wang, De-yi
Transverse cracking of cross-ply laminates: A computational micromechanics perspective
Herraez, Miguel; Mora, Diego; Naya, Fernando; Lopes, Claudio S.; Gonzalez, Carlos; LLorca, Javier
Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature
Monclus, M. A.; Karlik, M.; Callisti, M.; Frutos, E.; LLorca, J.; Polcar, T.; Molina-Aldareguia, J. M.
Creep behaviour of injection moulded polyamide 6/organoclay nanocomposites by nanoindentation and cantilever-bending
Seltzer, Rocio; Mai, Yiu-Wing; Frontini, Patricia M.
Hierarchical TiO2 nanofibres as photocatalyst for CO2 reduction: Influence of morphology and phase composition on catalytic activity
Renones, Patricia; Moya, Alicia; Fresno, Fernando; Collado, Laura; Vilatela, Juan J.; de la Pena O'Shea, Victor A.
Deformation and energy dissipation mechanisms of needle-punched nonwoven fabrics: A multiscale experimental analysis
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Effect of Nd Additions on Extrusion Texture Development and on Slip Activity in a Mg-Mn Alloy
Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T.
Effect of Misorientation on the Compression of Highly Anisotropic Single-Crystal Micropillars
Soler, Rafael; Mikel Molina-Aldareguia, Jon; Segurado, Javier; LLorca, Javier
Mechanical properties of tungsten alloys with Y2O3 and titanium additions
Aguirre, M. V.; Martin, A.; Pastor, J. Y.; LLorca, J.; Monge, M. A.; Pareja, R.
Effect of the grain refinement via severe plastic deformation on strength properties and deformation behavior of an A16061 alloy at room and cryogenic temperatures
Moreno-Valle, E. C.; Sabirov, I.; Perez-Prado, M. T.; Murashkin, M. Yu.; Bobruk, E. V.; Valiev, R. Z.
Interdiffusion and Atomic Mobility for Face-Centered-Cubic Co-Al Alloys
Cui, Y. -W.; Tang, B.; Kato, R.; Kainuma, R.; Ishida, K.
Physically-sound simulation of low-velocity impact on fiber reinforced laminates
Lopes, C. S.; Sadaba, S.; Gonzalez, C.; Llorca, J.; Camanho, P. P.
Computational identification of organic porous molecular crystals
Evans, Jack D.; Huang, David M.; Haranczyk, Maciej; Thornton, Aaron W.; Sumby, Christopher J.; Doonan, Christian J.
Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: A quantitative study
Hidalgo-Manrique, P.; Robson, J. D.; Perez-Prado, M. T.
Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon
Global and local deformation behavior and mechanical properties of individual phases in a quenched and partitioned steel
de Diego-Calderon, I.; De Knijf, D.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sabirov, I.; Foejer, C.; Petrov, R. H.
Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Carreno, F.; Perez-Prado, M. T.
Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials
Munoz, Raul; Delgado, Sofia; Gonzalez, Carlos; Lopez-Romano, Bernardo; Wang, De-Yi; LLorca, Javier
Iterated linear comparison bounds for viscoplastic porous materials with ellipsoidal microstructures
Agoras, M.; Ponte Castaneda, P.
Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminates
Sebaey, T. A.; Blanco, N.; Lopes, C. S.; Costa, J.
Billion-atom synchronous parallel kinetic Monte Carlo simulations of critical 3D Ising systems
Martinez, E.; Monasterio, P. R.; Marian, J.
Void growth in copper during high-temperature power-law creep
Dzieciol, K.; Borbely, A.; Sket, F.; Isaac, A.; Di Michiel, M.; Cloetens, P.; Buslaps, Th; Pyzalla, A. R.
Hierarchical nanoporous silica doped with tin as novel multifunctional hybrid material to flexible poly(vinyl chloride) with greatly improved flame retardancy and mechanical properties
Pan, Ye-Tang; Trempont, Cedric; Wang, De-Yi
Impact of halogen-free flame retardant with varied phosphorus chemical surrounding on the properties of diglycidyl ether of bisphenol-A type epoxy resin: synthesis, fire behaviour, flame-retardant mechanism and mechanical properties
Zhao, Xiaomin; Babu, Heeralal Vignesh; Llorca, Javier; Wang, De-Yi
Effect of indentation size on the nucleation and propagation of tensile twinning in pure magnesium
Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Molina-Aldareguia, J. M.
A computational model coupling mechanics and electrophysiology in spinal cord injury
Jerusalem, Antoine; Garcia-Grajales, Julian A.; Merchan-Perez, Angel; Pena, Jose M.
Diffusion Research in BCC Ti-Al-Mo Ternary Alloys
Chen, Yi; Tang, Bin; Xu, Guanglong; Wang, Chuanyun; Kou, Hongchao; Li, Jinshan; Cui, Yuwen
Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion
Jabbari Taleghani, M. A.; Ruiz Navas, E. M.; Torralba, J. M.
Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clustering
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J.
Continuum modeling of a neuronal cell under blast loading
Jerusalem, Antoine; Dao, Ming
The Influence of Intrinsic Framework Flexibility on Adsorption in Nanoporous Materials
Witman, Matthew; Ling, Sanliang; Jawahery, Sudi; Boyd, Peter G.; Haranczyk, Maciej; Slater, Ben; Smit, Berend
Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process
Liu, H. T.; Yang, L. W.; Sun, X.; Cheng, H. F.; Wang, C. Y.; Mao, W. G.; Molina-Aldareguia, J. M.
Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel
Romero, Pablo; Oro, Raquel; Campos, Monica; Torralba, Jose M.; Guzman de Villoria, Roberto
Effect of the cooling rate on microstructure and hardness of MAR-M247 Ni-based superalloy
Milenkovic, Srdjan; Sabirov, Ilchat; LLorca, Javier
Preparation and characterisation of bioplastics made from cottonseed protein
Yue, H. -B.; Cui, Y. -D.; Shuttleworth, P. S.; Clark, James H.
An experimental and numerical study of the influence of local effects on the application of the fibre push-in test
Molina-Aldareguia, Jon M.; Rodriguez, M.; Gonzalez, C.; LLorca, J.
Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects
Naya, F.; Gonzalez, C.; Lopes, C. S.; Van der Veen, S.; Pons, F.
Synergistic Effect of Carbon Nanotube and Polyethersulfone on Flame Retardancy of Carbon Fiber Reinforced Epoxy Composites
Li, Cheng; Kang, Nian-Jun; Delgado Labrandero, Sofia; Wan, Jintao; Gonzalez, Carlos; Wane, De-Yi
High-temperature nanoindentation behavior of Al/SiC multilayers
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N.
Mechanical and electrical properties of an ultrafine grained Al-8.5 wt. % RE (RE=5.4 wt.% Ce, 3.1wt.% La) alloy processed by severe plastic deformation
Murashkin, M. Yu.; Sabirov, I.; Medvedev, A. E.; Enikeev, N. A.; Lefebvre, W.; Valiev, R. Z.; Sauvage, X.
Structure-property relationships of nanocornposites based on polylactide and MgAl layered double hydroxides
Leng, Jing; Purohit, Purv J.; Kang, Nianjun; Wang, De-Yi; Falkenhagen, Jana; Emmerling, Franziska; Thueneman, Andreas F.; Schoenhals, Andreas
One-step hydrothermal synthesis of nano zinc carbonate and its use as a promising substitute for antimony trioxide in flame retardant flexible poly(vinyl chloride)
Pan, Ye-Tang; Wang, De-Yi
A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites
Vajari, Danial Ashouri; Gonzalez, Carlos; Llorca, Javier; Legarth, Brian Nyvang
An eco-friendly way to fire retardant flexible polyurethane foam: layer-by-layer assembly of fully bio-based substances
Wang, Xin; Pan, Ye-Tang; Wan, Jin-Tao; Wang, De-Yi
Interfacial load transfer in carbon nanotube/ceramic microfiber hybrid polymer composites
Lachman, Noa; Wiesel, Erica; Guzman de Villoria, Roberto; Wardle, Brian L.; Wagner, H. Daniel
Shape Dynamics and Rheology of Soft Elastic Particles in a Shear Flow
Gao, Tong; Hu, Howard H.; Ponte Castaneda, Pedro
Influence of the high pressure torsion die geometry on the allotropic phase transformations in pure Zr
Zhilyaev, A. P.; Galvez, F.; Sharafutdinov, A.; Perez-Prado, M. T.
Effect of interface fracture on the tensile deformation of fiber-reinforced elastomers
Moraleda, Joaquin; Segurado, Javier; Llorca, Javier
Effect of phosphorus-containing inorganic-organic hybrid coating on the flammability of cotton fabrics: Synthesis, characterization and flammability
Liu, Yun; Pan, Ye-Tang; Wang, Xin; Acuna, Pablo; Zhu, Ping; Wagenknecht, Udo; Heinrich, Gert; Zhang, Xiu-Qin; Wang, Rui; Wang, De-Yi
Development of constitutive relationship and processing map for Al-6. 65Si-0.44Mg alloy and its composite with B4C particulates
Gangolu, S.; Rao, A. Gourav; Sabirov, I.; Kashyap, B. P.; Prabhu, N.; Deshmukh, V. P.
Three-dimensional dislocation dynamics analysis of size effects on void growth
Chang, Hyung-Jun; Segurado, Javier; LLorca, Javier
Variable-stiffness composite panels: As-manufactured modeling and its influence on the failure behavior
Falco, O.; Mayugo, J. A.; Lopes, C. S.; Gascons, N.; Turon, A.; Costa, J.
Simulation of the deformation of polycrystalline nanostructured Ti by computational homogenization
Segurado, Javier; Llorca, Javier
Optimum high temperature strength of two-dimensional nanocomposites
Monclus, M. A.; Zheng, S. J.; Mayeur, J. R.; Beyerlein, I. J.; Mara, N. A.; Polcar, T.; Llorca, J.; Molina-Aldareguia, J. M.
Orientation dependency of the alpha to omega plus beta transformation in commercially pure zirconium by high-pressure torsion
Srinivasarao, B.; Zhilyaev, A. P.; Perez-Prado, M. T.
Carbon-family materials for flame retardant polymeric materials
Wang, Xin; Kalali, Ehsan Naderi; Wan, Jin-Tao; Wang, De-Yi
Tough Electrodes: Carbon Nanotube Fibers as the Ultimate Current Collectors/Active Material for Energy Management Devices
Vilatela, Juan J.; Marcilla, Rebeca
Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of the mismatch angle between plies
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Maimi, P.; Costa, J.
Ant Colony Optimization for dispersed laminated composite panels under biaxial loading
Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Costa, J.
Effect of rare earth additions on the critical resolved shear stresses of magnesium alloys
Herrera-Solaz, V.; Hidalgo-Manrique, R.; Perez-Prado, M. T.; Letzig, D.; Llorca, J.; Segurado, J.
Thermoset curing through Joule heating of nanocarbons for composite manufacture, repair and soldering
Mas, Bartolome; Fernandez-Blazquez, Juan P.; Duval, Jonathan; Bunyan, Humphrey; Vilatela, Juan J.
On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion
Srinivasarao, B.; Zhilyaev, A. P.; Langdon, T. G.; Perez-Prado, M. T.
A green functional nanohybrid: preparation, characterization and properties of a beta-cyclodextrin based functional layered double hydroxide
Kang, Nian-Jun; Wang, De-Yi
Predicting the thermal conductivity of composite materials with imperfect interfaces
Marcos-Gomez, D.; Ching-Lloyd, J.; Elizalde, M. R.; Clegg, W. J.; Molina-Aldareguia, J. M.
New Superefficiently Flame-Retardant Bioplastic Poly(lactic acid): Flammability, Thermal Decomposition Behavior, and Tensile Properties
Zhao, Xiaomin; Guerrero, Francisco Reyes; Lorca, Javier; Wang, De-Yi
Effect of microstructure on fatigue behavior of advanced high strength steels produced by quenching and partitioning and the role of retained austenite
de Diego-Calderon, I.; Rodriguez-Calvillo, P.; Lara, A.; Molina-Aldareguia, J. M.; Petrov, R. H.; De Knijf, D.; Sabirov, I.
Hot forging design and microstructure evolution of a high Nb containing TiAl alloy
Tang, Bin; Cheng, Liang; Kou, Hongchao; Li, Jinshan
Mechanical properties up to 1900 K of Al2O3/Er3Al5O12/ZrO2 eutectic ceramics grown by the laser floating zone method
Mesa, M. C.; Oliete, P. B.; Pastor, J. Y.; Martin, A.; LLorca, J.
Influence of strain rate on the twin and slip activity of a magnesium alloy containing neodymium
Dudamell, N. V.; Hidalgo-Manrique, P.; Chakkedath, A.; Chen, Z.; Boehlert, C. J.; Galvez, E.; Yi, S.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T.
Interdiffusion and Atomic Mobility for Face-Centered Cubic (FCC) Co-W Alloys
Cui, Y. -W.; Xu, Guanglong; Kato, R.; Lu, Xiao-Gang; Kainuma, R.; Ishida, K.
Torque rheology of zircon feedstocks for powder injection moulding
Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M.
A constitutive model for the in-plane mechanical behavior of nonwoven fabrics
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Method for Simultaneousiy Improving the Thermal Stability and Mechanical Properties of Poly(lactic acid): Effect of High-Energy Electrons on the Morphological, Mechanical, and Thermal Properties of PLA/MMT Nanocomposites
Wang, De-Yi; Gohs, Uwe; Kang, Nian-Jun; Leuteritz, Andreas; Boldt, Regine; Wagenknecht, Udo; Heinrich, Gert
MMonCa: An Object Kinetic Monte Carlo simulator for damage irradiation evolution and defect diffusion
Martin-Bragado, Ignacio; Rivera, Antonio; Valles, Gonzalo; Luis Gomez-Selles, Jose; Caturla, Maria J.
Influence of texture on the recrystallization mechanisms in an AZ31 Mg sheet alloy at dynamic rates
Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T.
Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties
Multigner, M.; Ferreira-Barragans, S.; Frutos, E.; Jaafar, M.; Ibanez, J.; Marin, P.; Perez-Prado, M. T.; Gonzalez-Doncel, G.; Asenjo, A.; Gonzalez-Carrasco, J. L.
Nanostructured Al and Cu alloys with superior strength and electrical conductivity
Murashkin, M. Yu; Sabirov, I.; Sauvage, X.; Valiev, R. Z.
Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium
Sabirov, I.; Valiev, R. Z.; Semenova, I. P.; Pippan, R.
Enhanced mechanical properties and electrical conductivity in ultrafine-grained Al alloy processed via ECAP-PC
Murashkin, M. Yu; Sabirov, I.; Kazykhanov, V. U.; Bobruk, E. V.; Dubravina, A. A.; Valiev, R. Z.
X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact
Seltzer, R.; Gonzalez, C.; Munoz, R.; LLorca, J.; Blanco-Varela, T.
Characterization of crack propagation in mode I delamination of multidirectional CFRP laminates
Sebaey, T. A.; Blanco, N.; Costa, J.; Lopes, C. S.
Antimicrobial metal-organic frameworks incorporated into electrospun fibers
Quiros, Jennifer; Boltes, Karina; Aguado, Sonia; Guzman de Villoria, Roberto; Jose Vilatela, Juan; Rosal, Roberto
Influence of exfoliated graphite nanoplatelets on the flammability and thermal properties of polyethylene terephthalate/polypropylene nanocomposites
Inuwa, I. M.; Hassan, Azman; Wang, De-Yi; Samsudin, S. A.; Haafiz, M. K. Mohamad; Wong, S. L.; Jawaid, M.
Full elastic constitutive relation of non-isotropic aligned-CNT/PDMS flexible nanocomposites
Sepulveda, A. T.; Guzman de Villoria, R.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, L. A.
Constitutional and microstructural investigation of the pseudobinary NiAl-W system
Milenkovic, Srdjan; Schneider, Andre; Frommeyer, Georg
Macroscopic fibres of CNTs as electrodes for multifunctional electric double layer capacitors: from quantum capacitance to device performance
Senokos, E.; Reguero, V.; Palma, J.; Vilatela, J. J.; Marcilla, Rebeca
An in situ polymerization approach for functionalized MoS2/nylon-6 nanocomposites with enhanced mechanical properties and thermal stability
Wang, Xin; Kalali, Ehsan Naderi; Wang, De-Yi
Automatic quantification of matrix cracking and fiber rotation by X-ray computed tomography in shear-deformed carbon fiber-reinforced laminates
Sket, F.; Enfedaque, A.; Alton, C.; Gonzalez, C.; Molina-Aldareguia, J. M.; Llorca, J.
Optimization of curing cycle in carbon fiber-reinforced laminates: Void distribution and mechanical properties
Hernandez, S.; Sket, F.; Gonzalez, C.; LLorca, J.
A micro-meso-model of intra-laminar fracture in fiber-reinforced composites based on a discontinuous Galerkin/cohesive zone method
Wu, L.; Tjahjanto, D.; Becker, G.; Makradi, A.; Jerusalem, A.; Noels, L.
Determination of damage micromechanisms and fracture resistance of glass fiber/epoxy cross-ply laminate by means of X-ray computed microtomography
Sket, F.; Seltzer, R.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
Origin of the twinning to slip transition with grain size refinement, with decreasing strain rate and with increasing temperature in magnesium
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T.
Deformation behavior of a high strength multiphase steel at macro- and micro-scales
de Diego-Calderon, I.; Santofimia, M. J.; Molina-Aldareguia, J. M.; Monclus, M. A.; Sabirov, I.
Mechanical properties of Y2O3-doped W-Ti alloys
Aguirre, M. V.; Martin, A.; Pastor, J. Y.; Llorca, J.; Monge, M. A.; Pareja, R.
Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Beyond traditional light-emitting electrochemical cells – a review of new device designs and emitters
Fresta, Elisa; Costa, Ruben D.
Few layered Co(OH)(2) ultrathin nanosheet-based polyurethane nanocomposites with reduced fire hazard: from eco-friendly flame retardance to sustainable recycling
Zhang, Junhao; Kong, Qinghong; Yang, Lingwei; Wang, De-Yi
Strong Carbon Nanotube Fibers by Drawing Inspiration from Polymer Fiber Spinning
Aleman, Belen; Reguero, Victor; Mas, Bartolome; Vilatela, Juan J.
Intumescent multilayer hybrid coating for flame retardant cotton fabrics based on layer-by-layer assembly and sol-gel process
Wang, Xin; Quintero Romero, Manuel; Zhang, Xiu-Qin; Wang, Rui; Wang, De-Yi
Three dimensional (3D) microstructure-based modeling of interfacial decohesion in particle reinforced metal matrix composites
Williams, J. J.; Segurado, J.; LLorca, J.; Chawla, N.
Effect of grain size on slip activity in pure magnesium polycrystals
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T.
Determination of the mechanical properties of amorphous materials through instrumented nanoindentation
Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
The effect of particle shape and distribution on the macroscopic behavior of magnetoelastic composites
Galipeau, Evan; Ponte Castaneda, Pedro
A methodology to measure the interface shear strength by means of the fiber push-in test
Rodriguez, M.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
Antifouling membranes prepared by electrospinning polylactic acid containing biocidal nanoparticles
Dasari, Aravind; Quiros, Jennifer; Herrero, Berta; Boltes, Karina; Garcia-Calvo, Eloy; Rosal, Roberto
An inverse optimization strategy to determine single crystal mechanical behavior from polycrystal tests: Application to AZ31 Mg alloy
Herrera-Solaz, V.; LLorca, J.; Dogan, E.; Karaman, I.; Segurado, J.
Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates
Enfedaque, A.; Molina-Aldareguia, J. M.; Galvez, F.; Gonzalez, C.; Llorca, J.
Synthesis of aromatic-aliphatic polyamide acting as adjuvant in polylactic acid (PLA)/ammonium polyphosphate (APP) system
Shabanian, Meisam; Kang, Nian-Jun; Wang, De-Yi; Wagenknecht, Udo; Heinrich, Gert
Ballistic performance of nanocrystalline and nanotwinned ultrafine crystal steel
Frontan, Jaime; Zhang, Yuming; Dao, Ming; Lu, Jian; Galvez, Francisco; Jerusalem, Antoine
Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Ultrastiff Biobased Epoxy Resin with High T-g and Low Permittivity: From Synthesis to Properties
Wan, Jintao; Zhao, Jianqing; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Zhao, Ying; Pan, Ye-Tang; Wang, De-Yi
Application of digital image correlation at the microscale in fiber-reinforced composites
Canal, L. P.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; LLorca, J.
Synthesis and characterization of functional eugenol derivative based layered double hydroxide and its use as a nanoflame-retardant in epoxy resin
Li, Cheng; Wan, Jintao; Kalali, Ehsan Naderi; Fan, Hong; Wang, De-Yi
Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route
Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.; Semenova, I. P.; Salimgareeva, G. Kh; Valiev, R. Z.
Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics
Totry, Essam; Gonzalez, Carlos; LLorca, Javier
A sustainable, eugenol-derived epoxy resin with high biobased content, modulus, hardness and low flammability: Synthesis, curing kinetics and structure-property relationship
Wan, Jintao; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Kalali, Ehsan Naderi; Wang, Xin; Wang, De-Yi
Oxygen vacancies and interfaces enhancing photocatalytic hydrogen production in mesoporous CNT/TiO2 hybrids
Moya, Alicia; Cherevan, Alexey; Marchesan, Silvia; Gebhardt, Paul; Prato, Maurizio; Eder, Dominik; Vilatela, Juan J.
Measuring the critical resolved shear stresses in Mg alloys by instrumented nanoindentation
Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Bohlen, J.; Gutierrez-Urrutia, I.; Llorca, J.; Molina-Aldareguia, J. M.
A New Approach to Reducing the Flammability of Layered Double Hydroxide (LDH)-Based Polymer Composites: Preparation and Characterization of Dye Structure-Intercalated LDH and Its Effect on the Flammability of Polypropylene-Grafted Maleic Anhydride/d-LDH Composites
Kang, Nian-Jun; Wang, De-Yi; Kutlu, Burak; Zhao, Peng-Cheng; Leuteritz, Andreas; Wagenknecht, Udo; Heinrich, Gert
High temperature micropillar compression of Al/SiC nanolaminates
Lotfian, S.; Rodriguez, M.; Yazzie, K. E.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M.
Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites
Hernandez, S.; Sket, F.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J.
Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions
Zhilyaev, A. P.; Sabirov, I.; Gonzalez-Doncel, G.; Molina-Aldareguia, J.; Srinivasarao, B.; Perez-Prado, M. T.
Toughening Polypropylene and Its Nanocomposites with Submicrometer Voids
Dasari, Aravind; Zhang, Qing-Xin; Yu, Zhong-Zhen; Mai, Yiu-Wing
The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy
Sabirov, I.; Barnett, M. R.; Estrin, Y.; Hodgson, P. D.
A novel biobased epoxy resin with high mechanical stiffness and low flammability: synthesis, characterization and properties
Wan, Jintao; Gan, Bin; Li, Cheng; Molina-Aldareguia, Jon; Li, Zhi; Wang, Xin; Wang, De-Yi
Fire retardancy behavior of PLA based nanocomposites
Gonzalez, Alfonso; Dasari, Aravind; Herrero, Berta; Plancher, Emeric; Santaren, Julio; Esteban, Antonio; Lim, Szu-Hui
Three-dimensional investigation of grain boundary-twin interactions in a Mg AZ31 alloy by electron backscatter diffraction and continuum modeling
Fernandez, A.; Jerusalem, A.; Gutierrez-Urrutia, I.; Perez-Prado, M. T.
Multifunctional intercalation in layered double hydroxide: toward multifunctional nanohybrids for epoxy resin
Naderi Kalali, Ehsan; Wang, Xin; Wang, De-Yi
Renewable Cardanol-Based Surfactant Modified Layered Double Hydroxide as a Flame Retardant for Epoxy Resin
Wang, Xin; Kalali, Ehsan Naderi; Wang, De-Yi
Controlling Carbon Nanotube Type in Macroscopic Fibers Synthesized by the Direct Spinning Process
Reguero, Victor; Aleman, Belen; Mas, Bartolome; Jose Vilatela, Juan
Micropillar compression of LiF [111] single crystals: Effect of size, ion irradiation and misorientation
Soler, R.; Molina-Aldareguia, J. M.; Segurado, J.; Llorca, J.; Merino, R. I.; Orera, V. M.
Intraply fracture of fiber-reinforced composites: Microscopic mechanisms and modeling
Pablo Canal, Luis; Gonzalez, Carlos; Segurado, Javier; LLorca, Javier
A finite-strain constitutive theory for electro-active polymer composites via homogenization
Castaneda, P. Ponte; Siboni, M. N.
Nanostructured aluminium alloys produced by severe plastic deformation: New horizons in development
Sabirov, I.; Murashkin, M. Yu; Valiev, R. Z.
Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates
Ulacia, I.; Dudamell, N. V.; Galvez, F.; Yi, S.; Perez-Prado, M. T.; Hurtado, I.
Highly thermally conductive flame-retardant epoxy nanocomposites with reduced ignitability and excellent electrical conductivities
Gu, Junwei; Liang, Chaobo; Zhao, Xiaomin; Gan, Bin; Qiu, Hua; Guo, Yonqiang; Yang, Xutong; Zhang, Qiuyu; Wang, De-Yi
Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites
Totry, Essam; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; LLorca, Javier
Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing
LLorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; Seltzer, R.; Sket, F.; Rodriguez, M.; Sadaba, S.; Munoz, R.; Canal, L. P.
Nanocarbon Composites and Hybrids in Sustainability: A Review
Vilatela, Juan J.; Eder, Dominik
Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature
Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T.
New low carbon Q&P steels containing film-like intercritical ferrite
Santofimia, M. J.; Nguyen-Minh, T.; Zhao, L.; Petrov, R.; Sabirov, I.; Sietsma, J.
Functionalized layered double hydroxide-based epoxy nanocomposites with improved flame retardancy and mechanical properties
Naderi Kalali, Ehsan; Wang, Xin; Wang, De-Yi
Bulk Nanostructured Metals for Innovative Applications
Valiev, Ruslan Z.; Sabirov, Ilchat; Zhilyaev, Alexander P.; Langdon, Terence G.
Influence of interface mobility on the evolution of austenite-martensite grain assemblies during annealing
Santofimia, M. J.; Speer, J. G.; Clarke, A. J.; Zhao, L.; Sietsma, J.
Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials
Danas, K.; Ponte Castaneda, P.
Nanostructured titanium-based materials for medical implants: Modeling and development
Mishnaevsky, Leon, Jr.; Levashov, Evgeny; Valiev, Ruslan Z.; Segurado, Javier; Sabirov, Ilchat; Enikeev, Nariman; Prokoshkin, Sergey; Solov'yov, Andrey V.; Korotitskiy, Andrey; Gutmanas, Elazar; Gotman, Irene; Rabkin, Eugen; Psakh'e, Sergey; Dluhos, Ludek; Seefeldt, Marc; Smolin, Alexey
A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity
Valiev, R. Z.; Murashkin, M. Yu; Sabirov, I.
First Experimental Observation of Shear Induced hcp to bcc Transformation in Pure Zr
Perez-Prado, M. T.; Zhilyaev, A. P.
DAMASK: the Dusseldorf Advanced MAterial Simulation Kit for studying crystal plasticity using an FE based or a spectral numerical solver
Roters, F.; Eisenlohr, P.; Kords, C.; Tjahjanto, D. D.; Diehl, M.; Raabe, D.
Metal-organic framework with optimally selective xenon adsorption and separation
Banerjee, Debasis; Simon, Cory M.; Plonka, Anna M.; Motkuri, Radha K.; Liu, Jian; Chen, Xianyin; Smit, Berend; Parise, John B.; Haranczyk, Maciej; Thallapally, Praveen K.
Electrically conductive and super-tough polyamide-based nanocomposites
Dasari, Aravind; Yu, Zhong-Zhen; Mai, Yiu-Wing
