Saavedra Flores, Erick I.; Haldar, Sandip
Menú
The formation mechanism of eutectic microstructures in NiAl-Cr composites
Tang, Bin; Cogswell, Daniel A.; Xu, Guanglong; Milenkovic, Srdjan; Cui, Yuwen
Strength and toughness of structural fibres for composite material reinforcement
Herraez, M.; Fernandez, A.; Lopes, C. S.; Gonzalez, C.
Simultaneously enhancing the flame retardancy and toughness of epoxy by lamellar dodecyl-ammonium dihydrogen phosphate
Zhuang, Rong-Chuan; Yang, Juan; Wang, De-Yi; Huang, Ya-Xi
Thermostructural behaviour of Ni-Cr materials: modelling of bulk and nanoparticle systems
Ortiz-Roldan, Jose M.; Rabdel Ruiz-Salvador, A.; Calero, Sofia; Montero-Chacon, Francisco; Garcia-Perez, Elena; Segurado, Javier; Martin-Bragado, Ignacio; Hamad, Said
Physical Simulation of Hot Rolling of Ultra-fine Grained Pure Titanium
Polyakov, Alexander; Gunderov, Dmitry; Sitdikov, Vil'; Valiev, Ruslan; Semenova, Irina; Sabirov, Ilchat
Tip Shape Effect on Hot Nanoindentation Hardness and Modulus Measurements
Alberto Monclus, Miguel; Lotfian, Saeid; Mikel Molina-Aldareguia, Jon
Microtomographic assessment of damage in P91 and E911 steels after long-term creep
Renversade, Loic; Ruoff, Herbert; Maile, Karl; Sket, Federico; Borbely, Andras
Process modeling of stress and chemical effects in SiGe alloys using kinetic Monte Carlo
Zographos, Nikolas; Martin-Bragado, Ignacio
Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder
Molinari, A.; Bisoffi, E.; Menapace, C.; Torralba, J.
Microstructure features and mechanical properties of a UFG Al-Mg-Si alloy produced via SPD
Bobruk, E.; Sabirov, I.; Kazykhanov, V.; Valiev, R.; Murashkin, M.
Computational modeling of high performance steel fiber reinforced concrete using a micromorphic approach
Huespe, A. E.; Oliver, J.; Mora, D. F.
Lattice Kinetic Modeling of the Anisotropic Growth of Two-Dimensional Islands on Barite (001) Surface
de Antonio Gomez, Santiago; Pina, Carlos M.; Martin-Bragado, Ignacio
Thermal stability of {110} facet terminated gold nanobelts
Chen, Ying; Milenkovic, Srdjan; Hassel, Achim Walter
Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation
Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier
Effect of water conditioning on the fracture behavior of PA12 composites processed by selective laser sintering
Seltzer, Rocio; Martin de la Escalera, Federico; Segurado, Javier
Multi-technique characterisation of MOVPE-grown GaAs on Si
Wong, C. S.; Bennett, N. S.; McNally, P. J.; Galiana, B.; Tejedor, P.; Benedicto, M.; Molina-Aldareguia, J. M.; Monaghan, S.; Hurley, P. K.; Cherkaoui, K.
Metal Matrix Composites reinforced with nano-size reinforcements
Molina-Aldareguia, Jon M.; Reyes Elizalde, M.
HIGH STRENGTH ULTRA-FINE GRAINED TITANIUM PRODUCED VIA A NOVEL SPD PROCESSING ROUTE
Molina-Aldareguia, J. M.; Perez-Prado, M. T.; Valiev, R. Z.; Semenova, I. P.; Sabirov, I.
Hollow waveguide-based full-field absorbance biosensor
Cadarso, V. J.; Llobera, A.; Fernandez-Sanchez, C.; Darder, M.; Dominguez, C.
Tunable Fano Resonance and Plasmon-Exciton Coupling in Single Au Nanotriangles on Monolayer WS2 at Room Temperature
Wang, Mingsong; Krasnok, Alex; Zhang, Tianyi; Scarabelli, Leonardo; Liu, He; Wu, Zilong; Liz-Marzan, Luis M.; Terrones, Mauricio; Alu, Andrea; Zheng, Yuebing
Tunable Resonance Coupling in Single Si Nanoparticle-Monolayer WS2 Structures
Lepeshov, Sergey; Wang, Mingson; Krasnok, Alex; Kotov, Oleg; Zhang, Tianyi; Liu, He; Jiang, Taizhi; Korgel, Brian; Terrones, Mauricio; Zheng, Yuebing; Alu, Andrea
Ultrafine nickel nanocatalyst-engineering of an organic layered double hydroxide towards a super-efficient fire-safe epoxy resin via interfacial catalysis
Li, Zhi; Zhang, Junhao; Dufosse, Francois; Wang, De-Yi
Modeling microstructural effects in dilatational plasticity of polycrystalline materials
Lebensohn, Ricardo A.; Idiart, Martin I.; Ponte Castaneda, Pedro
Thermal stability of nanostructured iron powder as a function of amount and nature of reinforcement (Nb or NbC)
Fuentes-Pacheco, L.; Campos, M.; Torralba, J. M.
Numerical simulations of void linkage in model materials using a nonlocal ductile damage approximation
Weck, Arnaud; Segurado, Javier; LLorca, Javier; Wilkinson, David; Boehm, Helmut
Microstructure and properties of dense Tyranno-ZMI SiC/SiC containing Ti3Si(Al)C-2 with plastic deformation toughening mechanism
Ma, Xiaokang; Yin, Xiaowei; Fan, Xiaomeng; Sun, Xinnan; Yang, Lingwei; Ye, Fang; Cheng, Laifei
Gas-Phase Functionalization of Macroscopic Carbon Nanotube Fiber Assemblies: Reaction Control, Electrochemical Properties, and Use for Flexible Supercapacitors
Iglesias, Daniel; Senokos, Evgeny; Aleman, Belen; Cabana, Laura; Navio, Cristina; Marcilla, Rebeca; Prato, Maurizio; Vilatela, Juan J.; Marchesan, Silvia
Xenon Recovery at Room Temperature using Metal-Organic Frameworks
Elsaidi, Sameh K.; Ongari, Daniele; Xu, Wenqian; Mohamed, Mona H.; Haranczyk, Maciej; Thallapally, Praveen K.
Study of the synergistic effect of nickel phosphate nanotubes (NiPO-NT) on intumescent flame retardant polypropylene composites
Dong, Xiang; Nie, ShiBin; Liu, ZeGong; Wang, De-yi
Transglutaminase catalyzed hydrolyzed wheat gliadin grafted with chitosan oligosaccharide and its characterization
Jiang, Wen; Zhou, Zhiming; Wang, Dan; Zhou, Xiaohua; Tao, Renyou; Yang, Yang; Shi, Yexin; Zhang, Guiluo; Wang, Deyi; Zhou, Zhen
Three dimensional (3D) microstructure-based finite element modeling of Al-SiC nanolaminates using focused ion beam (FIB) tomography
Mayer, Carl R.; Molina-Aladareguia, Jon; Chawla, Nikhilesh
A multiscale micromechanical model of needlepunched nonwoven fabrics
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Notch effect in failure of fiberglass non-woven materials
Chen, Yinglong; Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier; Siegmund, Thomas
Histological response of soda-lime glass-ceramic bactericidal rods implanted in the jaws of beagle dogs
Moya, Jose S.; Martinez, Arturo; Lopez-Piriz, Roberto; Guitian, Francisco; Diaz, Luis A.; Esteban-Tejeda, Leticia; Cabal, Belen; Sket, Federico; Fernandez-Garcia, Elisa; Tomsia, Antoni P.; Torrecillas, Ramon
Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium
Pushkareva, Marina; Adrien, Jerome; Maire, Eric; Segurado, Javier; Llorca, Javier; Weck, Arnaud
History and Utility of Zeolite Framework-Type Discovery from a Data-Science Perspective
Zimmermann, Nils E. R.; Haranczyk, Maciej
Recrystallization Behavior at Diffusion Bonding Interface of High Nb Containing TiAl Alloy
Tang, Bin; Qi, Xian Sheng; Kou, Hong Chao; Li, Jin Shan; Milenkovic, Srdjan
A new strain rate dependent continuum framework for Mg alloys
Andres Garcia-Grajales, Julian; Fernandez, Ana; Leary, Duncan; Jerusalem, Antoine
Influence of fiber orientation on the ballistic performance of needlepunched nonwoven fabrics
Martinez-Hergueta, F.; Ridruejo, A.; Galvez, F.; Gonzalez, C.; LLorca, J.
Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature
Yang, L. W.; Mayer, C.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M.
Strength ceiling smashed for light metals
Perez Prado, Maria Teresa; Cepeda-Jimenez, Carmen M.
A multiscale approach to defect evolution in tungsten under helium irradiation
Valles, G.; Cazalilla, A. L.; Gonzalez, C.; Martin-Bragado, I.; Prada, A.; Iglesias, R.; Perlado, J. M.; Rivera, A.
Energy dissipation during delamination in composite materials – An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip
Jalalvand, Meisam; Czel, Gergely; Fuller, Jonathan D.; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier
Controlled synthesis of nanocrystalline glass-like carbon thin films with tuneable electrical and optical properties
Romero, P.; Postigo, P. A.; Baquedano, E.; Martinez, J.; Bosca, A.; Guzman de Villoria, R.
Orientation dependence of indentation behavior in Al-SiC nanolaminate composites
Mayer, C.; Yang, L. W.; Singh, S. S.; Xie, H.; Shen, Y. -L.; Llorca, J.; Molina-Aldareguia, J.; Chawla, N.
EBSD-Assisted Slip Trace Analysis During In Situ SEM Mechanical Testing: Application to Unravel Grain Size Effects on Plasticity of Pure Mg Polycrystals
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T.
On the robustness of an inverse optimization approach based on the Levenberg-Marquardt method for the mechanical behavior of polycrystals
Herrera-Solaz, V.; Segurado, J.; LLorca, J.
Experimental and phenomenological investigations of diffusion in Co-Al-W alloys
Chang, Hui; Xu, Guanglong; Lu, Xiao-Gang; Zhou, Lian; Ishida, Kiyohito; Cui, Yuwen
High Temperature Nanoindentation Response of RTM6 Epoxy Resin at Different Strain Rates
Frontini, P.; Lotfian, S.; Monclus, M. A.; Molina-Aldareguia, J. M.
Effect of Organo-Modified Nanosepiolite on Fire Behaviors and Mechanical Performance of Polypropylene Composites
Zhang, Junhao; de Juan, Sergio; Esteban-Cubillo, Antonio; Santaren, Julio; Wang, De-Yi
Understanding contribution of microstructure to fracture behaviour of sintered steels
Torralba, J. M.; Esteban, L.; Bernardo, E.; Campos, M.
Control of the Mechanical Asymmetry in an Extruded MN11 Alloy by Static Annealing
Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T.
Computational thermodynamics, computational kinetics, and materials design
Lu, Xiao-Gang; Wang, Zhuo; Cui, Yuwen; Jin, Zhanpeng
A novel method for computing effective diffusivity: Application to helium implanted alpha-Fe thin films
Dunn, Aaron; Agudo-Merida, Laura; Martin-Bragado, Ignacio; McPhie, Mathieu; Cherkaoui, Mohammed; Capolungo, Laurent
Role of particles on microstructure and mechanical properties of the severely processed 7075 aluminium alloy
Hidalgo-Manrique, P.; Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Ruano, O. A.; Carreno, F.
Effect of high pressure torsion on the microstructure evolution of a gamma Ti-45Al-2Nb-2Mn-0.8 vol% TiB2 alloy
Srinivasarao, B.; Zhilyaev, A. P.; Munoz-Moreno, R.; Perez-Prado, M. T.
Comprehensive modeling of solid phase epitaxial growth using Lattice Kinetic Monte Carlo
Martin-Bragado, Ignacio
Effects of internal pore pressure on closed-cell elastomeric foams
Lopez-Pamies, Oscar; Ponte Castaneda, Pedro; Idiart, Martin I.
Influence of Plasma Surface Treatments on Kink Band Formation in PBO Fibers During Compression
Lorenzo-Villafranca, Eduardo; Tamargo-Martinez, Katia; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Martinez-Alonso, Amelia; Tascon, Juan M. D.; Gracia, Mercedes; Llorca, Javier
A novel high-content CNT-reinforced SiC matrix composite-fiber by precursor infiltration and pyrolysis process
Zhang, X. S.; Yang, L. W.; Liu, H. T.; Zu, M.
Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites
Naya, F.; Molina-Aldareguia, J. M.; Lopes, C. S.; Gonzalez, C.; Llorca, J.
Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Llorca, J.; Molina-Aldareguia, J. M.
Quasi-atomistic modeling of the microstructure evolution in binary alloys and its application to the FeCr case
Dopico, Ignacio; Castrillo, Pedro; Martin-Bragado, Ignacio
Study and Suppression of the Microstructural Anisotropy Generated During the Consolidation of a Carbonyl Iron Powder by Field-Assisted Hot Pressing
Garcia-Junceda, Andrea; Acebo, Laura; Manuel Torralba, Jose
Non-empirical phase equilibria in the Cr-Mo system: A combination of first-principles calculations, cluster expansion and Monte Carlo simulations
Chen, Wenzhou; Xu, Guanglong; Martin-Bragado, Ignacio; Cui, Yuwen
Evolution of dislocation loops in iron under irradiation: The impact of carbon
Terentyev, D.; Martin-Bragado, I.
Assessment of homogeneity of the shear-strain pattern in Al-7 wt%Si casting alloy processed by high-pressure torsion
Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Garcia-Infanta, J. M.; Zhilyaev, A. P.; Ruano, O. A.; Carreno, F.
Properties of AZ91 alloy produced by spark plasma sintering and extrusion
Straffelini, G.; Da Costa, L. Dione; Menapace, C.; Zanella, C.; Torralba, J. M.
Effect of ion flux on helium retention in helium-irradiated tungsten
Rivera, A.; Valles, G.; Caturla, M. J.; Martin-Bragado, I.
Shock attenuation of PMMA sandwich panels filled with soda-lime glass beads: A fluid-structure interaction continuum model simulation
Christou, George A.; Young, Laurence R.; Goel, Rahul; Vechart, Andrew P.; Jerusalem, Antoine
Process Modeling of Chemical and Stress Effects in SiGe
Zographos, Nikolas; Zechner, Christoph; Castrillo, Pedro; Martin-Bragado, Ignacio
Characterization of antiphase domains on GaAs grown on Ge substrates by conductive atomic force microscopy for photovoltaic applications
Galiana, B.; Rey-Stolle, I.; Beinik, I.; Algora, C.; Teichert, C.; Molina-Aldareguia, J. M.; Tejedor, P.
Large area photoelectrodes based on hybrids of CNT fibres and ALD-grown TiO2
Moya, A.; Kemnade, N.; Osorio, M. R.; Cherevan, A.; Granados, D.; Eder, D.; Vilatela, J. J.
Interfacial growth of MOF-derived layered double hydroxide nanosheets on graphene slab towards fabrication of multifunctional epoxy nanocomposites
Pan, Ye-Tang; Wan, Jintao; Zhao, Xuanliang; Li, Cheng; Wang, De-Yi
Nano-architectured mesoporous silica decorated with ultrafine Co3O4 toward an efficient way to delaying ignition and improving fire retardancy of polystyrene
Li, Zhi; Wang, De-Yi
Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization
Cruzado, A.; LLorca, J.; Segurado, J.
Effect of nitrogen and oxygen doped carbon nanotubes on flammability of epoxy nanocomposites
Shabestari, Marjan E.; Kalali, Ehsan N.; Gonzalez, Viviana Jehova; Wang, De-Yi; Fernandez-Blazquez, Juan P.; Baselga, Juan; Martin, Olga
Natural halloysite nanotube based functionalized nanohybrid assembled via phosphorus-containing slow release method: A highly efficient way to impart flame retardancy to polylactide
Li, Zhi; Fernandez Exposito, Daniel; Jimenez Gonzalez, Alejandro; Wang, De-Yi
Interfacial charge transfer in functionalized multi-walled carbon nanotube@TiO2 nanofibres
Saha, Avishek; Moya, Alicia; Kahnt, Axel; Iglesias, Daniel; Marchesan, Silvia; Wannemacher, Reinhold; Prato, Maurizio; Vilatela, Juan J.; Guldi, Dirk M.
Effect of alpha morphology on the diffusional beta <-> alpha transformation in Ti-55531 during continuous heating: Dissection by dilatometer test, microstructure observation and calculation
Chen, Fu-Wen; Xu, Guanglong; Zhang, Xiao-Yong; Zhou, Ke-Chao; Cui, Yuwen
Effect of solution heat treatment on microstructure and damage accumulation in cast Al-Cu alloys
Gutierrez, R. Fernandez; Sket, F.; Maire, E.; Wilde, F.; Boller, E.; Requena, G.
Flame retardancy and thermal degradation properties of cotton/alginate fabric
Liu, Yun; Zhao, Jin-Chao; Zhang, Chuan-Jie; Cui, Li; Guo, Yi; Zhu, Ping; Zhang, Hao; Zheng, Zhi-Wei; wang, De-Yi
Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing
Munoz-Moreno, R.; Ruiz-Navas, E. M.; Boehlert, C. J.; Llorca, J.; Torralba, J. M.; Perez-Prado, M. T.
Thermomechanical relaxation and different water states in cottonseed protein derived bioplastics
Yue, H. -B.; Fernandez-Blazquez, J. P.; Shuttleworth, P. S.; Cui, Y. -D.; Ellis, G.
Effect of the particle size and solids volume fraction on the thermal degradation behaviour of Invar 36 feedstocks
Hidalgo, J.; Fernandez-Blazquez, J. P.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
Surface phenomena during the early stages of sintering in steels modified with Fe-Mn-Si-C master alloys
Oro, Raquel; Campos, Monica; Hryha, Eduard; Manuel Torralba, Jose; Nyborg, Lars
Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effect
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J.
About application of three dimensional analyses of fracture surfaces in fracture study on nanostructured titanium
Sabirov, I.; Valiev, R. Z.; Pippan, R.
Dielectric elastomer composites: small-deformation theory and applications
Siboni, Morteza Hakimi; Ponte Castaneda, Pedro
Elevated temperature deformation of Zr to large strains
Kassner, M. E.; Perez Prado, M. T.; Hayes, T. A.; Jiang, L.; Barrabes, S. R.; Lee, I. F.
Thermal stability and degradation kinetics of feedstocks for powder injection moulding – A new way to determine optimal solid loading?
Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M.
Phase field modeling of isothermal beta -> omega phase transformation in the Zr-Nb alloys
Tang, Bin; Cui, Y. -W.; Kou, Hongchao; Chang, Hui; Li, Jinshan; Zhou, Lian
In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn+0.8 vol pct TiB2
Munoz-Moreno, Rocio; Boehlert, Carl J.; Teresa Perez-Prado, M.; Ruiz-Navas, Elisa M.; Llorca, Javier
Effect of Austempering Conditions on the Microstructure and Tensile Properties of Low Alloyed Sintered Steel
Campos, M.; Sicre-Artalejo, J.; Munoz, J. J.; Torralba, J. M.
Dislocation dynamics in non-convex domains using finite elements with embedded discontinuities
Romero, Ignacio; Segurado, Javier; LLorca, Javier
Covalent assembly of MCM-41 nanospheres on graphene oxide for improving fire retardancy and mechanical property of epoxy resin
Li, Zhi; Jimenez Gonzalez, Alejandro; Babu Heeralal, Vignesh; Wang, De-Yi
Role of the Bridging Group in Bis-Pyridyl Ligands: Enhancing Both the Photo- and Electroluminescent Features of Cationic (IPr) Cu-I Complexes
Elie, Margaux; Weber, Michael D.; Di Meo, Florent; Sguerra, Fabien; Lohier, Jean-Francois; Pansu, Robert B.; Renaud, Jean-Luc; Hamel, Matthieu; Linares, Mathieu; Costa, Ruben D.; Gaillard, Sylvain
Effect of nanoscale thick lamellae on the micromechanical response of a TiAl alloy
Palomares-Garcia, A. J.; Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.
Functional organoclay with high thermal stability and its synergistic effect on intumescent flame retardant polypropylene
Xiao, Dan; Li, Zhi; Zhao, Xiaomin; Gohs, Uwe; Wagenknecht, Udo; Voit, Brigitte; Wang, De-Yi
Sol-gel temperature dependent ductile-to-brittle transition of aluminosilicate fiber reinforced silica matrix composite
Yang, L. W.; Wang, J. Y.; Liu, H. T.; Jiang, R.; Cheng, H. F.
Interfacial engineering of renewable metal organic framework derived honeycomb-like nanoporous aluminum hydroxide with tunable porosity
Pan, Ye-Tang; Zhang, Lu; Zhao, Xiaomin; Wang, De-Yi
Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating
Castro Cerda, F. M.; Sabirov, I.; Goulas, C.; Sietsma, J.; Monsalve, A.; Petrov, R. H.
Water soluble Invar 36 feedstock development for mu PIM
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels
Torralba, Jose M.; Navarro, Alfonso; Campos, Monica
The microstructural evolution of a pre-alloyed AZ91 magnesium alloy powder through high-energy milling and subsequent isothermal annealing
Taleghani, M. A. Jabbari; Torralba, J. M.
Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study
Munoz-Moreno, Rocio; Teresa Perez-Prado, M.; Llorca, Javier; Maria Ruiz-Navas, Elisa; Boehlert, Carl J.
Structural investigation of MOVPE-grown GaAs on Ge by x-ray techniques
Wong, C. S.; Bennett, N. S.; Galiana, B.; Tejedor, P.; Benedicto, M.; Molina-Aldareguia, J. M.; McNally, P. J.
Phase Transformations During High-Pressure Torsion of Pure Zr and of a Zr-2.5%Nb Alloy
Zhilyaev, Alexander P.; Sharafutdinov, Alfred V.; Teresa Perez-Prado, M.
Enhanced Lithium- and Sodium-Ion Storage in an Interconnected Carbon Network Comprising Electronegative Fluorine
Hong, Seok-Min; Etacheri, Vinodkumar; Hong, Chulgi Nathan; Choi, Seung Wan; Lee, Ki Bong; Pol, Vilas G.
Preparation, fire behavior and thermal stability of a novel flame retardant polypropylene system
Xiao, Dan; Li, Zhi; De Juan, Sergio; Gohs, Uwe; Wagenknecht, Udo; Voit, Brigitte; Wang, De-Yi
Thickness and temperature depending intermixing of SiOx/SiO2 and SiOxNy/SiO2 superlattices: Experimental observation and thermodynamic modeling
Zhigunov, D. M.; Sarikov, A.; Chesnokov, Yu. M.; Vasiliev, A. L.; Zakharov, N.; Kashkarov, P. K.
Microstructural design in quenched and partitioned (Q&P) steels to improve their fracture properties
de Diego-Calderon, I.; Sabirov, I.; Molina-Aldareguia, J. M.; Fojer, C.; Thiessen, R.; Petrov, R. H.
Load partition and microstructural evolution during in situ hot deformation of Ti-6Al-6V-2Sn alloys
Canelo-Yubero, David; Requena, Guillermo; Sket, Federico; Poletti, Cecilia; Warchomicka, Fernando; Daniels, John; Schell, Norbert; Stark, Andreas
Microbial colonisation of transparent glass-like carbon films triggered by a reversible radiation-induced hydrophobic to hydrophilic transition
Jalvo, Blanca; Santiago-Morales, Javier; Romero, Pablo; Guzman de Villoria, Roberto; Rosal, Roberto
Fire-safe and environmentally friendly nanocomposites based on layered double hydroxides and ethylene propylene diene elastomer
Basu, Debdipta; Das, Amit; Wang, De-Yi; George, Jinu Jacob; Stoeckelhuber, Klaus Werner; Boldt, Regine; Leuteritz, Andreas; Heinrich, Gert
Macroscopic CNT fibres inducing non-epitaxial nucleation and orientation of semicrystalline polymers
Yue, Hangbo; Monreal-Bernal, Alfonso; Fernandez-Blazquez, Juan P.; Llorca, Javier; Vilatela, Juan J.
Spatially Resolved Chemical Characterization with Scanning Photoemission Spectromicroscopy: Towards Near-Ambient-Pressure Experiments
Sezen, Hikmet; Aleman, Belen; Amati, Matteo; Dalmiglio, Matteo; Gregoratti, Luca
Fatigue Behavior of an Ultrafine-Grained Al-Mg-Si Alloy Processed by High-Pressure Torsion
Murashkin, Maxim; Sabirov, Ilchat; Prosvirnin, Dmitriy; Ovid'ko, Ilya; Terentiev, Vladimir; Valiev, Ruslan; Dobatkin, Sergey
Thermodynamic assessment of the Fe-Mn-Si system and atomic mobility of its fcc phase
Zheng, Weisen; Lu, Xiao-Gang; He, Yanlin; Cui, Yuwen; Li, Lin
An atomistically informed kinetic Monte Carlo model of grain boundary motion coupled to shear deformation
Prieto-Depedro, M.; Martin-Bragado, I.; Segurado, J.
New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior
Oro, Raquel; Campos, Monica; Gierl-Mayer, Christian; Danninger, Herbert; Manuel Torralba, Jose
A stable X-FEM in cohesive transition from closed to open crack
Sadaba, Sergio; Romero, Ignacio; Gonzalez, Carlos; Llorca, Javier
Flexible Pressure Sensors: Modeling and Experimental Characterization
Sepulveda, A. T.; Guzman de Villoria, R.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, L. A.
Assessment of diffusion mobility for the bcc phase of the Ti-Al-Cr system
Li, Weibang; Tang, Bin; Cui, Y-W.; Hu, Rui; Chang, Hui; Li, Jinshan; Zhou, Lian
Effect of heat treatment of carbon nanofibres on electroless copper deposition
Tamayo-Ariztondo, J.; Cordoba, J. M.; Oden, M.; Molina-Aldareguia, J. M.; Elizalde, M. R.
Local and global measures of the fracture toughness of metal matrix composites
Sabirov, I.; Kolednik, O.
Surface Modification of Al(2)O(3)-ZrO(2)(Y(2)O(3)) Eutectic Oxides by Laser Melting: Processing and Wear Resistance
Ester, Francisco J.; Merino, Rosa I.; Pastor, Jose Y.; Martin, Antonia; Llorca, Javier
Processing-temperature dependent micro- and macro-mechanical properties of SiC fiber reinforced SiC matrix composites
Yang, L. W.; Liu, H. T.; Cheng, H. F.
Fractal carbon nanotube fibers with mesoporous crystalline structure
Yue, H.; Reguero, V.; Senokos, E.; Monreal-Bernal, A.; Mas, B.; Fernandez-Blazquez, J. P.; Marcilla, R.; Vilatela, J. J.
A facile approach towards large-scale synthesis of hierarchically nanoporous SnO2@Fe2O3 0D/1D hybrid and its effect on flammability, thermal stability and mechanical property of flexible poly(vinyl chloride)
Pan, Ye-Tang; Wang, Xin; Li, Zhi; Wang, De-Yi
Inclusion complex between beta-cyclodextrin and phenylphosphonicdiamide as novel bio-based flame retardant to epoxy: Inclusion behavior, characterization and flammability
Zhao, Xiaomin; Xiao, Dan; Picon Alonso, Juan; Wang, De-Yi
Grain size versus microstructural stability in the high strain rate superplastic response of a severely friction stir processed Al-Zn-Mg-Cu alloy
Orozco-Caballero, Alberto; Alvarez-Leal, Marta; Hidalgo-Manrique, Paloma; Maria Cepeda-Jimenez, Carmen; Antonio Ruano, Oscar; Carreno, Fernando
Effect of N,N ‘-diallyl-phenylphosphoricdiamide on ease of ignition, thermal decomposition behavior and mechanical properties of poly (lactic acid)
Zhao, Xiaomin; de Juan, Sergio; Reyes Guerrero, Francisco; Li, Zhi; Llorca, Javier; Wang, De-Yi
Effect of reactive time on flame retardancy and thermal degradation behavior of bio-based zinc alginate film
Liu, Yun; Zhao, Xi-Ran; Peng, Ya-Li; Wang, Dan; Yang, Lingwei; Peng, Hao; Zhu, Ping; Wang, De-Yi
Group 16 elements control the synthesis of continuous fibers of carbon nanotubes
Mas, Bartolome; Aleman, Belen; Dopico, Ignacio; Martin-Bragado, Ignacio; Naranjo, Teresa; Perez, Emilio M.; Vilatela, Juan J.
An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography
Vila, Joaquim; Sket, Federico; Wilde, Fabian; Requena, Guillermo; Gonzalez, Carlos; LLorca, Javier
Mechanical Properties and Fracture Behavior of Directionally Solidified NiAl-V Eutectic Composites
Milenkovic, Srdjan; Caram, Rubens
Multiscale modeling of defect formation during solid-phase epitaxy regrowth of silicon
Prieto-Depedro, M.; Romero, I.; Martin-Bragado, T.
A level set approach for the analysis of flow and compaction during resin infusion in composite materials
Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier
The Effect of Nd on the Tension and Compression Deformation Behavior of Extruded Mg-1Mn (wt pct) at Temperatures Between 298 K and 523 K (25 A degrees C and 250 A degrees C)
Chakkedath, Ajith; Bohlen, Jan; Yi, Sangbong; Letzig, Dietmar; Chen, Zhe; Boehlert, Carl J.
Hot workability of nanocrystalline AZ91 magnesium alloy
Jabbari-Taleghani, M. A.; Torralba, J. M.
Design of Low-Melting Point Compositions Suitable for Transient Liquid Phase Sintering of PM Steels Based on a Thermodynamic and Kinetic Study
Bernardo, Elena; de Oro, Raquel; Campos, Monica; Manuel Torralba, Jose
Thermal stability of pure bcc Zr fabricated by high pressure torsion
Perez-Prado, M. T.; Sharafutdinov, A.; Zhilyaev, A. P.
Accurate Characterization of the Pore Volume in Microporous Crystalline Materials
Ongari, Daniele; Boyd, Peter G.; Barthel, Senja; Witman, Matthew; Haranczyk, Maciej; Smit, Berend
Large-Area, All-Solid, and Flexible Electric Double Layer Capacitors Based on CNT Fiber Electrodes and Polymer Electrolytes
Senokos, Evgeny; Reguero, Victor; Cabana, Laura; Palma, Jesus; Marcilla, Rebeca; Jose Vilatela, Juan
Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions
Naya, F.; Herraez, M.; Lopes, C. S.; Gonzalez, C.; Van der Veen, S.; Pons, F.
Combined effects of ammonium polyphosphate and talc on the fire and mechanical properties of epoxy/glass fabric composites
Rajaei, Mohammad; Wang, De-Yi; Bhattacharyya, Debes
Interface controlled micro- and macro- mechanical properties of aluminosilicate fiber reinforced SiC matrix composites
Liu, H. T.; Yang, L. W.; Han, S.; Cheng, H. F.; Mao, W. G.; Molina-Aldareguia, J. M.
Threading through Macrocycles Enhances the Performance of Carbon Nanotubes as Polymer Fillers
Lopez-Moreno, Alejandro; Nieto-Ortega, Belen; Moffa, Maria; de Juan, Alberto; Bernal, M. Mar; Fernandez-Blazquez, Juan P.; Vilatela, Juan J.; Pisignano, Dario; Perez, Emilio M.
Influence of the Accumulative Roll Bonding Process Severity on the Microstructure and Superplastic Behaviour of 7075 Al Alloy
Hidalgo-Manrique, P.; Orozco-Caballero, A.; Cepeda-Jimenez, C. M.; Ruano, O. A.; Carreno, F.
Microplasticity-based rationalization of the room temperature yield asymmetry in conventional polycrystalline Mg alloys
Cepeda-Jimenez, C. M.; Perez-Prado, M. T.
Inherent predominance of high chiral angle metallic carbon nanotubes in continuous fibers grown from a molten catalyst
Aleman, B.; Mar Bernal, M.; Mas, B.; Perez, Emilio M.; Reguero, V.; Xu, G.; Cui, Y.; Vilatela, Juan J.
Ballistic performance of hybrid 3D woven composites: Experiments and simulations
Munoz, R.; Martinez-Hergueta, F.; Galvez, F.; Gonzalez, C.; LLorca, J.
A study of composite laminates failure using an anisotropic gradient-enhanced damage mean-field homogenization model
Wu, L.; Sket, F.; Molina-Aldareguia, J. M.; Makradi, A.; Adam, L.; Doghri, I.; Noels, L.
Inverse notch sensitivity: Cracks can make nonwoven fabrics stronger
Ridruejo, Alvaro; Jubera, Rafael; Gonzalez, Carlos; LLorca, Javier
Novel silicone-phenyl contained amine curing agent for epoxy resin: 1. Non-isothermal cure and thermal decomposition
Cao, Jun; Hu, Jijiang; Fan, Hong; Wan, Jintao; Li, Bogeng
Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate
Jubera, R.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Evolution of the microstructure, texture and creep properties of the 7075 aluminium alloy during hot accumulative roll bonding
Hidago-Manrique, P.; Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Ruano, O. A.; Carreno, F.
Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics
Ygnacio Pastor, Jose; Martin, Antonia; Molina-Aldareguia, Jon M.; LLorca, Javier; Oliete, Patricia B.; Larrea, Angel; Pena, Jose I.; Orera, Victor M.; Arenal, Raul
Substrate orientation dependence on the solid phase epitaxial growth rate of Ge
Darby, B. L.; Yates, B. R.; Martin-Bragado, I.; Gomez-Selles, J. L.; Elliman, R. G.; Jones, K. S.
A magnetically anisotropic, ellipsoidal inclusion subjected to a non-aligned magnetic field in an elastic medium
Siboni, M. H.; Ponte Castaneda, Pedro
A Multifunctional Yarn Made Of Carbon Nanotubes
Jose Vilatela, Juan; Windle, Alan H.
Elevated temperature nanoindentation behaviour of polyamide 6
Seltzer, Rocio; Kim, Jang-Kyo; Mai, Yiu-Wing
Variational estimates for the effective response and field statistics in thermoelastic composites with intra-phase property fluctuations
Lahellec, Noel; Castaneda, Pedro Ponte; Suquet, Pierre
A continuum model of nanocrystalline metals under shock loading
Jerusalem, Antoine; Radovitzky, Raul
Unveiling the Dynamic Processes in Hybrid Lead Bromide Perovskite Nanoparticle Thin Film Devices
Puscher, Bianka M. D.; Aygueler, Meltem F.; Docampo, Pablo; Costa, Ruben D.
Thermal resistant, mechanical and electrical properties of a novel ultrahigh-content randomly-oriented CNTs reinforced SiC matrix composite-sheet
Yang, L. W.; Zhang, X. S.; Liu, H. T.; Zu, M.
Influence of phenylphosphonate based flame retardant on epoxy/glass fiber reinforced composites (GRE): Flammability, mechanical and thermal stability properties
Zhao, Xiaomin; Yang, Lingwei; Hueto Martin, Francisco; Zhang, Xiu-Qin; Wang, Rui; Wang, De-Yi
Crystallization behavior of nanocomposites based on poly(L-lactide) and MgAl layered double hydroxides – Unbiased determination of the rigid amorphous phases due to the crystals and the nanofiller
Leng, Jing; Kang, Nianjun; Wang, De-Yi; Wurm, Andreas; Schick, Christoph; Schoenhals, Andreas
Highly responsive UV-photodetectors based on single electrospun TiO2 nanofibres
Molina-Mendoza, Aday J.; Moya, Alicia; Frisenda, Riccardo; Svatek, Simon A.; Gant, Patricia; Gonzalez-Abad, Sergio; Antolin, Elisa; Agrait, Nicolas; Rubio-Bollinger, Gabino; Perez de lara, David; Vilatela, Juan J.; Castellanos-Gomez, Andres
A Composite Fabrication Sensor Based on Electrochemical Doping of Carbon Nanotube Yarns
Fernandez-Toribio, Juan C.; Iniguez-Rabago, Agustin; Vila, Joaquim; Gonzalez, Carlos; Ridruejo, Alvaro; Jose Vilatela, Juan
Tight-binding approach to penta-graphene
Stauber, T.; Beltran, J. I.; Schliemann, J.
Structure and dynamics of shear bands in amorphous-crystalline nanolaminates
Guo, Wei; Gan, Bin; Molina-Aldareguia, Jon M.; Poplawsky, Jonathan D.; Raabe, Dierk
Electrochemical Anisotropy of Nanostructured Titanium for Biomedical Implants
Matykina, E.; Arrabal, R.; Valiev, R. Z.; Molina-Aldareguia, J. M.; Belov, P.; Sabirov, I.
How do graphite nanoplates affect the fracture toughness of polypropylene composites?
Herrera-Ramirez, Luis C.; Castell, Pere; Fernandez-Blazquez, Juan P.; Fernandez, Angel; Guzman de Villoria, Roberto
Capillary rheology studies of INVAR 36 feedstocks for powder injection moulding
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
Microstructural Development and Mechanical Properties of PM Ti-45Al-2Nb-2Mn-0.8 vol.% TiB2 Processed by Field Assisted Hot Pressing
Munoz-Moreno, R.; Ruiz-Navas, E. M.; Srinivasarao, B.; Torralba, J. M.
Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature
Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; de la Escalera Cutillas, F. Martin
Electroplated Bimagnetic Microwires: From Processing to Magnetic Properties and Sensor Devices
Torrejon, Jacob; Infante, German; Badini-Confalonieri, Giovanni; Pirota, Kleber R.; Vazquez, Manuel
An atomistic investigation of the impact of in-plane uniaxial stress during solid phase epitaxial regrowth
Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Rivallin, Pierrette; Tavernier, Clement; Cristoloveanu, Sorin; Martin-Bragado, Ignacio
Multiscale Modeling of Composites: Toward Virtual Testing … and Beyond
Llorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Lopes, C. S.
APPLICATION OF EQUAL CHANNEL ANGULAR PRESSING WITH PARALLEL CHANNELS FOR GRAIN REFINEMENT IN ALUMINIUM ALLOYS AND ITS EFFECT ON DEFORMATION BEHAVIOR
Sabirov, I.; Perez-Prado, M. T.; Murashkin, M.; Molina-Aldareguia, J. M.; Bobruk, E. V.; Yunusova, N. F.; Valiev, R. Z.
Electric Field-Modulated Non-ohmic Behavior of Carbon Nanotube Fibers in Polar Liquids
Terrones, Jeronimo; Elliott, James A.; Vilatela, Juan J.; Windle, Alan H.
Anisotropic finite-strain models for porous viscoplastic materials with microstructure evolution
Agoras, M.; Castaneda, P. Ponte
Novel silicon-modified phenolic novolacs and their biofiber-reinforced composites: Preparation, characterization and performance
Li, Cheng; Fan, Hong; Wang, De-Yi; Hu, Jijiang; Wan, Jintao; Li, Bogeng
A two-scale model predicting the mechanical behavior of nanocrystalline solids
Peron-Luhrs, V.; Jerusalem, A.; Sansoz, F.; Stainier, L.; Noels, L.
Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J.
A phase-field approach to athermal beta -> omega transformation
Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian
Continuum modeling of dislocation starvation and subsequent nucleation in nano-pillar compressions
Jerusalem, Antoine; Fernandez, Ana; Kunz, Allison; Greer, Julia R.
{111} local configurations: The main source of silicon defects during solid phase epitaxial regrowth modeled by lattice kinetic Monte Carlo
Martin-Bragado, Ignacio
Fabrication of HfO2 patterns by laser interference nanolithography and selective dry etching for III-V CMOS application
Benedicto, Marcos; Galiana, Beatriz; Molina-Aldareguia, Jon M.; Monaghan, Scott; Hurley, Paul K.; Cherkaoui, Karim; Vazquez, Luis; Tejedor, Paloma
Numerical simulation of the fracture behavior of Ti/SiC composites between 20 degrees C and 400 degrees C
Gonzalez, Carlos; Llorca, Javier
Simultaneously improving flame retardancy and dynamic mechanical properties of epoxy resin nanocomposites through layered copper phenylphosphate
Kong, Qinghong; Wu, Ting; Zhang, Junhao; Wang, De-Yi
Rational Design of a Low-Cost, High-Performance Metal-Organic Framework for Hydrogen Storage and Carbon Capture
Witman, Matthew; Ling, Sanliang; Gladysiak, Andrzej; Stylianou, Kyriakos C.; Smit, Berend; Slater, Ben; Haranczyk, Maciej
In-plane strength enhancement of laminated composites via aligned carbon nanotube interlaminar reinforcement
de Villoria, R. Guzman; Hallander, P.; Ydrefors, L.; Nordin, P.; Wardle, B. L.
Silicone-modified phenolic resin: Relationships between molecular structure and curing behavior
Li, Cheng; Ma, Zhongzhu; Zhang, Xianwei; Fan, Hong; Wan, Jintao
Microstructure, texture and mechanical properties in a low carbon steel after ultrafast heating
Castro Cerda, F.; Goulas, C.; Sabirov, I.; Papaefthymiou, S.; Monsalve, A.; Petrov, R. H.
Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature
Hidalgo-Manrique, P.; Herrera-Solaz, V.; Segurado, J.; Llorca, J.; Galvez, F.; Ruano, O. A.; Yi, S. B.; Perez-Prado, M. T.
Monotonic loading and fatigue response of a bio-based polyamide PA11 and a petrol-based polyamide PA12 manufactured by selective laser sintering
Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; Martin de la Escalera Cutillas, F.
