Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M.
Menú
Phase field modeling of isothermal beta -> omega phase transformation in the Zr-Nb alloys
Tang, Bin; Cui, Y. -W.; Kou, Hongchao; Chang, Hui; Li, Jinshan; Zhou, Lian
In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn+0.8 vol pct TiB2
Munoz-Moreno, Rocio; Boehlert, Carl J.; Teresa Perez-Prado, M.; Ruiz-Navas, Elisa M.; Llorca, Javier
Effect of Austempering Conditions on the Microstructure and Tensile Properties of Low Alloyed Sintered Steel
Campos, M.; Sicre-Artalejo, J.; Munoz, J. J.; Torralba, J. M.
Dislocation dynamics in non-convex domains using finite elements with embedded discontinuities
Romero, Ignacio; Segurado, Javier; LLorca, Javier
Covalent assembly of MCM-41 nanospheres on graphene oxide for improving fire retardancy and mechanical property of epoxy resin
Li, Zhi; Jimenez Gonzalez, Alejandro; Babu Heeralal, Vignesh; Wang, De-Yi
Role of the Bridging Group in Bis-Pyridyl Ligands: Enhancing Both the Photo- and Electroluminescent Features of Cationic (IPr) Cu-I Complexes
Elie, Margaux; Weber, Michael D.; Di Meo, Florent; Sguerra, Fabien; Lohier, Jean-Francois; Pansu, Robert B.; Renaud, Jean-Luc; Hamel, Matthieu; Linares, Mathieu; Costa, Ruben D.; Gaillard, Sylvain
Effect of nanoscale thick lamellae on the micromechanical response of a TiAl alloy
Palomares-Garcia, A. J.; Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.
Functional organoclay with high thermal stability and its synergistic effect on intumescent flame retardant polypropylene
Xiao, Dan; Li, Zhi; Zhao, Xiaomin; Gohs, Uwe; Wagenknecht, Udo; Voit, Brigitte; Wang, De-Yi
Sol-gel temperature dependent ductile-to-brittle transition of aluminosilicate fiber reinforced silica matrix composite
Yang, L. W.; Wang, J. Y.; Liu, H. T.; Jiang, R.; Cheng, H. F.
Interfacial engineering of renewable metal organic framework derived honeycomb-like nanoporous aluminum hydroxide with tunable porosity
Pan, Ye-Tang; Zhang, Lu; Zhao, Xiaomin; Wang, De-Yi
Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating
Castro Cerda, F. M.; Sabirov, I.; Goulas, C.; Sietsma, J.; Monsalve, A.; Petrov, R. H.
Water soluble Invar 36 feedstock development for mu PIM
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
From the TRIP effect and Quenching and Partitioning steels concepts to the development of new high-performance, lean powder metallurgy steels
Torralba, Jose M.; Navarro, Alfonso; Campos, Monica
The microstructural evolution of a pre-alloyed AZ91 magnesium alloy powder through high-energy milling and subsequent isothermal annealing
Taleghani, M. A. Jabbari; Torralba, J. M.
Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study
Munoz-Moreno, Rocio; Teresa Perez-Prado, M.; Llorca, Javier; Maria Ruiz-Navas, Elisa; Boehlert, Carl J.
Structural investigation of MOVPE-grown GaAs on Ge by x-ray techniques
Wong, C. S.; Bennett, N. S.; Galiana, B.; Tejedor, P.; Benedicto, M.; Molina-Aldareguia, J. M.; McNally, P. J.
Phase Transformations During High-Pressure Torsion of Pure Zr and of a Zr-2.5%Nb Alloy
Zhilyaev, Alexander P.; Sharafutdinov, Alfred V.; Teresa Perez-Prado, M.
Enhanced Lithium- and Sodium-Ion Storage in an Interconnected Carbon Network Comprising Electronegative Fluorine
Hong, Seok-Min; Etacheri, Vinodkumar; Hong, Chulgi Nathan; Choi, Seung Wan; Lee, Ki Bong; Pol, Vilas G.
Preparation, fire behavior and thermal stability of a novel flame retardant polypropylene system
Xiao, Dan; Li, Zhi; De Juan, Sergio; Gohs, Uwe; Wagenknecht, Udo; Voit, Brigitte; Wang, De-Yi
Thickness and temperature depending intermixing of SiOx/SiO2 and SiOxNy/SiO2 superlattices: Experimental observation and thermodynamic modeling
Zhigunov, D. M.; Sarikov, A.; Chesnokov, Yu. M.; Vasiliev, A. L.; Zakharov, N.; Kashkarov, P. K.
Microstructural design in quenched and partitioned (Q&P) steels to improve their fracture properties
de Diego-Calderon, I.; Sabirov, I.; Molina-Aldareguia, J. M.; Fojer, C.; Thiessen, R.; Petrov, R. H.
Load partition and microstructural evolution during in situ hot deformation of Ti-6Al-6V-2Sn alloys
Canelo-Yubero, David; Requena, Guillermo; Sket, Federico; Poletti, Cecilia; Warchomicka, Fernando; Daniels, John; Schell, Norbert; Stark, Andreas
Microbial colonisation of transparent glass-like carbon films triggered by a reversible radiation-induced hydrophobic to hydrophilic transition
Jalvo, Blanca; Santiago-Morales, Javier; Romero, Pablo; Guzman de Villoria, Roberto; Rosal, Roberto
Fire-safe and environmentally friendly nanocomposites based on layered double hydroxides and ethylene propylene diene elastomer
Basu, Debdipta; Das, Amit; Wang, De-Yi; George, Jinu Jacob; Stoeckelhuber, Klaus Werner; Boldt, Regine; Leuteritz, Andreas; Heinrich, Gert
Macroscopic CNT fibres inducing non-epitaxial nucleation and orientation of semicrystalline polymers
Yue, Hangbo; Monreal-Bernal, Alfonso; Fernandez-Blazquez, Juan P.; Llorca, Javier; Vilatela, Juan J.
Spatially Resolved Chemical Characterization with Scanning Photoemission Spectromicroscopy: Towards Near-Ambient-Pressure Experiments
Sezen, Hikmet; Aleman, Belen; Amati, Matteo; Dalmiglio, Matteo; Gregoratti, Luca
Fatigue Behavior of an Ultrafine-Grained Al-Mg-Si Alloy Processed by High-Pressure Torsion
Murashkin, Maxim; Sabirov, Ilchat; Prosvirnin, Dmitriy; Ovid'ko, Ilya; Terentiev, Vladimir; Valiev, Ruslan; Dobatkin, Sergey
Thermodynamic assessment of the Fe-Mn-Si system and atomic mobility of its fcc phase
Zheng, Weisen; Lu, Xiao-Gang; He, Yanlin; Cui, Yuwen; Li, Lin
An atomistically informed kinetic Monte Carlo model of grain boundary motion coupled to shear deformation
Prieto-Depedro, M.; Martin-Bragado, I.; Segurado, J.
New Alloying Systems for Sintered Steels: Critical Aspects of Sintering Behavior
Oro, Raquel; Campos, Monica; Gierl-Mayer, Christian; Danninger, Herbert; Manuel Torralba, Jose
A stable X-FEM in cohesive transition from closed to open crack
Sadaba, Sergio; Romero, Ignacio; Gonzalez, Carlos; Llorca, Javier
Flexible Pressure Sensors: Modeling and Experimental Characterization
Sepulveda, A. T.; Guzman de Villoria, R.; Viana, J. C.; Pontes, A. J.; Wardle, B. L.; Rocha, L. A.
Assessment of diffusion mobility for the bcc phase of the Ti-Al-Cr system
Li, Weibang; Tang, Bin; Cui, Y-W.; Hu, Rui; Chang, Hui; Li, Jinshan; Zhou, Lian
Effect of heat treatment of carbon nanofibres on electroless copper deposition
Tamayo-Ariztondo, J.; Cordoba, J. M.; Oden, M.; Molina-Aldareguia, J. M.; Elizalde, M. R.
Local and global measures of the fracture toughness of metal matrix composites
Sabirov, I.; Kolednik, O.
Surface Modification of Al(2)O(3)-ZrO(2)(Y(2)O(3)) Eutectic Oxides by Laser Melting: Processing and Wear Resistance
Ester, Francisco J.; Merino, Rosa I.; Pastor, Jose Y.; Martin, Antonia; Llorca, Javier
Processing-temperature dependent micro- and macro-mechanical properties of SiC fiber reinforced SiC matrix composites
Yang, L. W.; Liu, H. T.; Cheng, H. F.
Fractal carbon nanotube fibers with mesoporous crystalline structure
Yue, H.; Reguero, V.; Senokos, E.; Monreal-Bernal, A.; Mas, B.; Fernandez-Blazquez, J. P.; Marcilla, R.; Vilatela, J. J.
A facile approach towards large-scale synthesis of hierarchically nanoporous SnO2@Fe2O3 0D/1D hybrid and its effect on flammability, thermal stability and mechanical property of flexible poly(vinyl chloride)
Pan, Ye-Tang; Wang, Xin; Li, Zhi; Wang, De-Yi
Inclusion complex between beta-cyclodextrin and phenylphosphonicdiamide as novel bio-based flame retardant to epoxy: Inclusion behavior, characterization and flammability
Zhao, Xiaomin; Xiao, Dan; Picon Alonso, Juan; Wang, De-Yi
Grain size versus microstructural stability in the high strain rate superplastic response of a severely friction stir processed Al-Zn-Mg-Cu alloy
Orozco-Caballero, Alberto; Alvarez-Leal, Marta; Hidalgo-Manrique, Paloma; Maria Cepeda-Jimenez, Carmen; Antonio Ruano, Oscar; Carreno, Fernando
Effect of N,N ‘-diallyl-phenylphosphoricdiamide on ease of ignition, thermal decomposition behavior and mechanical properties of poly (lactic acid)
Zhao, Xiaomin; de Juan, Sergio; Reyes Guerrero, Francisco; Li, Zhi; Llorca, Javier; Wang, De-Yi
Effect of reactive time on flame retardancy and thermal degradation behavior of bio-based zinc alginate film
Liu, Yun; Zhao, Xi-Ran; Peng, Ya-Li; Wang, Dan; Yang, Lingwei; Peng, Hao; Zhu, Ping; Wang, De-Yi
Group 16 elements control the synthesis of continuous fibers of carbon nanotubes
Mas, Bartolome; Aleman, Belen; Dopico, Ignacio; Martin-Bragado, Ignacio; Naranjo, Teresa; Perez, Emilio M.; Vilatela, Juan J.
An in situ investigation of microscopic infusion and void transport during vacuum-assisted infiltration by means of X-ray computed tomography
Vila, Joaquim; Sket, Federico; Wilde, Fabian; Requena, Guillermo; Gonzalez, Carlos; LLorca, Javier
Mechanical Properties and Fracture Behavior of Directionally Solidified NiAl-V Eutectic Composites
Milenkovic, Srdjan; Caram, Rubens
Multiscale modeling of defect formation during solid-phase epitaxy regrowth of silicon
Prieto-Depedro, M.; Romero, I.; Martin-Bragado, T.
A level set approach for the analysis of flow and compaction during resin infusion in composite materials
Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier
The Effect of Nd on the Tension and Compression Deformation Behavior of Extruded Mg-1Mn (wt pct) at Temperatures Between 298 K and 523 K (25 A degrees C and 250 A degrees C)
Chakkedath, Ajith; Bohlen, Jan; Yi, Sangbong; Letzig, Dietmar; Chen, Zhe; Boehlert, Carl J.
Hot workability of nanocrystalline AZ91 magnesium alloy
Jabbari-Taleghani, M. A.; Torralba, J. M.
Design of Low-Melting Point Compositions Suitable for Transient Liquid Phase Sintering of PM Steels Based on a Thermodynamic and Kinetic Study
Bernardo, Elena; de Oro, Raquel; Campos, Monica; Manuel Torralba, Jose
Thermal stability of pure bcc Zr fabricated by high pressure torsion
Perez-Prado, M. T.; Sharafutdinov, A.; Zhilyaev, A. P.
Accurate Characterization of the Pore Volume in Microporous Crystalline Materials
Ongari, Daniele; Boyd, Peter G.; Barthel, Senja; Witman, Matthew; Haranczyk, Maciej; Smit, Berend
Large-Area, All-Solid, and Flexible Electric Double Layer Capacitors Based on CNT Fiber Electrodes and Polymer Electrolytes
Senokos, Evgeny; Reguero, Victor; Cabana, Laura; Palma, Jesus; Marcilla, Rebeca; Jose Vilatela, Juan
Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions
Naya, F.; Herraez, M.; Lopes, C. S.; Gonzalez, C.; Van der Veen, S.; Pons, F.
Combined effects of ammonium polyphosphate and talc on the fire and mechanical properties of epoxy/glass fabric composites
Rajaei, Mohammad; Wang, De-Yi; Bhattacharyya, Debes
Interface controlled micro- and macro- mechanical properties of aluminosilicate fiber reinforced SiC matrix composites
Liu, H. T.; Yang, L. W.; Han, S.; Cheng, H. F.; Mao, W. G.; Molina-Aldareguia, J. M.
Threading through Macrocycles Enhances the Performance of Carbon Nanotubes as Polymer Fillers
Lopez-Moreno, Alejandro; Nieto-Ortega, Belen; Moffa, Maria; de Juan, Alberto; Bernal, M. Mar; Fernandez-Blazquez, Juan P.; Vilatela, Juan J.; Pisignano, Dario; Perez, Emilio M.
Influence of the Accumulative Roll Bonding Process Severity on the Microstructure and Superplastic Behaviour of 7075 Al Alloy
Hidalgo-Manrique, P.; Orozco-Caballero, A.; Cepeda-Jimenez, C. M.; Ruano, O. A.; Carreno, F.
Microplasticity-based rationalization of the room temperature yield asymmetry in conventional polycrystalline Mg alloys
Cepeda-Jimenez, C. M.; Perez-Prado, M. T.
Inherent predominance of high chiral angle metallic carbon nanotubes in continuous fibers grown from a molten catalyst
Aleman, B.; Mar Bernal, M.; Mas, B.; Perez, Emilio M.; Reguero, V.; Xu, G.; Cui, Y.; Vilatela, Juan J.
Ballistic performance of hybrid 3D woven composites: Experiments and simulations
Munoz, R.; Martinez-Hergueta, F.; Galvez, F.; Gonzalez, C.; LLorca, J.
A study of composite laminates failure using an anisotropic gradient-enhanced damage mean-field homogenization model
Wu, L.; Sket, F.; Molina-Aldareguia, J. M.; Makradi, A.; Adam, L.; Doghri, I.; Noels, L.
Inverse notch sensitivity: Cracks can make nonwoven fabrics stronger
Ridruejo, Alvaro; Jubera, Rafael; Gonzalez, Carlos; LLorca, Javier
Novel silicone-phenyl contained amine curing agent for epoxy resin: 1. Non-isothermal cure and thermal decomposition
Cao, Jun; Hu, Jijiang; Fan, Hong; Wan, Jintao; Li, Bogeng
Mechanical behavior and deformation micromechanisms of polypropylene nonwoven fabrics as a function of temperature and strain rate
Jubera, R.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Evolution of the microstructure, texture and creep properties of the 7075 aluminium alloy during hot accumulative roll bonding
Hidago-Manrique, P.; Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Ruano, O. A.; Carreno, F.
Superplastic deformation of directionally solidified nanofibrillar Al2O3-Y3Al5O12-ZrO2 eutectics
Ygnacio Pastor, Jose; Martin, Antonia; Molina-Aldareguia, Jon M.; LLorca, Javier; Oliete, Patricia B.; Larrea, Angel; Pena, Jose I.; Orera, Victor M.; Arenal, Raul
Substrate orientation dependence on the solid phase epitaxial growth rate of Ge
Darby, B. L.; Yates, B. R.; Martin-Bragado, I.; Gomez-Selles, J. L.; Elliman, R. G.; Jones, K. S.
A magnetically anisotropic, ellipsoidal inclusion subjected to a non-aligned magnetic field in an elastic medium
Siboni, M. H.; Ponte Castaneda, Pedro
A Multifunctional Yarn Made Of Carbon Nanotubes
Jose Vilatela, Juan; Windle, Alan H.
Elevated temperature nanoindentation behaviour of polyamide 6
Seltzer, Rocio; Kim, Jang-Kyo; Mai, Yiu-Wing
Variational estimates for the effective response and field statistics in thermoelastic composites with intra-phase property fluctuations
Lahellec, Noel; Castaneda, Pedro Ponte; Suquet, Pierre
A continuum model of nanocrystalline metals under shock loading
Jerusalem, Antoine; Radovitzky, Raul
Unveiling the Dynamic Processes in Hybrid Lead Bromide Perovskite Nanoparticle Thin Film Devices
Puscher, Bianka M. D.; Aygueler, Meltem F.; Docampo, Pablo; Costa, Ruben D.
Thermal resistant, mechanical and electrical properties of a novel ultrahigh-content randomly-oriented CNTs reinforced SiC matrix composite-sheet
Yang, L. W.; Zhang, X. S.; Liu, H. T.; Zu, M.
Influence of phenylphosphonate based flame retardant on epoxy/glass fiber reinforced composites (GRE): Flammability, mechanical and thermal stability properties
Zhao, Xiaomin; Yang, Lingwei; Hueto Martin, Francisco; Zhang, Xiu-Qin; Wang, Rui; Wang, De-Yi
Crystallization behavior of nanocomposites based on poly(L-lactide) and MgAl layered double hydroxides – Unbiased determination of the rigid amorphous phases due to the crystals and the nanofiller
Leng, Jing; Kang, Nianjun; Wang, De-Yi; Wurm, Andreas; Schick, Christoph; Schoenhals, Andreas
Highly responsive UV-photodetectors based on single electrospun TiO2 nanofibres
Molina-Mendoza, Aday J.; Moya, Alicia; Frisenda, Riccardo; Svatek, Simon A.; Gant, Patricia; Gonzalez-Abad, Sergio; Antolin, Elisa; Agrait, Nicolas; Rubio-Bollinger, Gabino; Perez de lara, David; Vilatela, Juan J.; Castellanos-Gomez, Andres
A Composite Fabrication Sensor Based on Electrochemical Doping of Carbon Nanotube Yarns
Fernandez-Toribio, Juan C.; Iniguez-Rabago, Agustin; Vila, Joaquim; Gonzalez, Carlos; Ridruejo, Alvaro; Jose Vilatela, Juan
Tight-binding approach to penta-graphene
Stauber, T.; Beltran, J. I.; Schliemann, J.
Structure and dynamics of shear bands in amorphous-crystalline nanolaminates
Guo, Wei; Gan, Bin; Molina-Aldareguia, Jon M.; Poplawsky, Jonathan D.; Raabe, Dierk
Electrochemical Anisotropy of Nanostructured Titanium for Biomedical Implants
Matykina, E.; Arrabal, R.; Valiev, R. Z.; Molina-Aldareguia, J. M.; Belov, P.; Sabirov, I.
How do graphite nanoplates affect the fracture toughness of polypropylene composites?
Herrera-Ramirez, Luis C.; Castell, Pere; Fernandez-Blazquez, Juan P.; Fernandez, Angel; Guzman de Villoria, Roberto
Capillary rheology studies of INVAR 36 feedstocks for powder injection moulding
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
Microstructural Development and Mechanical Properties of PM Ti-45Al-2Nb-2Mn-0.8 vol.% TiB2 Processed by Field Assisted Hot Pressing
Munoz-Moreno, R.; Ruiz-Navas, E. M.; Srinivasarao, B.; Torralba, J. M.
Fatigue crack growth of SLS polyamide 12: Effect of reinforcement and temperature
Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; de la Escalera Cutillas, F. Martin
Electroplated Bimagnetic Microwires: From Processing to Magnetic Properties and Sensor Devices
Torrejon, Jacob; Infante, German; Badini-Confalonieri, Giovanni; Pirota, Kleber R.; Vazquez, Manuel
An atomistic investigation of the impact of in-plane uniaxial stress during solid phase epitaxial regrowth
Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Rivallin, Pierrette; Tavernier, Clement; Cristoloveanu, Sorin; Martin-Bragado, Ignacio
Multiscale Modeling of Composites: Toward Virtual Testing … and Beyond
Llorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Lopes, C. S.
APPLICATION OF EQUAL CHANNEL ANGULAR PRESSING WITH PARALLEL CHANNELS FOR GRAIN REFINEMENT IN ALUMINIUM ALLOYS AND ITS EFFECT ON DEFORMATION BEHAVIOR
Sabirov, I.; Perez-Prado, M. T.; Murashkin, M.; Molina-Aldareguia, J. M.; Bobruk, E. V.; Yunusova, N. F.; Valiev, R. Z.
Electric Field-Modulated Non-ohmic Behavior of Carbon Nanotube Fibers in Polar Liquids
Terrones, Jeronimo; Elliott, James A.; Vilatela, Juan J.; Windle, Alan H.
Anisotropic finite-strain models for porous viscoplastic materials with microstructure evolution
Agoras, M.; Castaneda, P. Ponte
Novel silicon-modified phenolic novolacs and their biofiber-reinforced composites: Preparation, characterization and performance
Li, Cheng; Fan, Hong; Wang, De-Yi; Hu, Jijiang; Wan, Jintao; Li, Bogeng
A two-scale model predicting the mechanical behavior of nanocrystalline solids
Peron-Luhrs, V.; Jerusalem, A.; Sansoz, F.; Stainier, L.; Noels, L.
Damage resistance and damage tolerance of dispersed CFRP laminates: Design and optimization
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J.
A phase-field approach to athermal beta -> omega transformation
Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian
Continuum modeling of dislocation starvation and subsequent nucleation in nano-pillar compressions
Jerusalem, Antoine; Fernandez, Ana; Kunz, Allison; Greer, Julia R.
{111} local configurations: The main source of silicon defects during solid phase epitaxial regrowth modeled by lattice kinetic Monte Carlo
Martin-Bragado, Ignacio
Fabrication of HfO2 patterns by laser interference nanolithography and selective dry etching for III-V CMOS application
Benedicto, Marcos; Galiana, Beatriz; Molina-Aldareguia, Jon M.; Monaghan, Scott; Hurley, Paul K.; Cherkaoui, Karim; Vazquez, Luis; Tejedor, Paloma
Numerical simulation of the fracture behavior of Ti/SiC composites between 20 degrees C and 400 degrees C
Gonzalez, Carlos; Llorca, Javier
Simultaneously improving flame retardancy and dynamic mechanical properties of epoxy resin nanocomposites through layered copper phenylphosphate
Kong, Qinghong; Wu, Ting; Zhang, Junhao; Wang, De-Yi
Rational Design of a Low-Cost, High-Performance Metal-Organic Framework for Hydrogen Storage and Carbon Capture
Witman, Matthew; Ling, Sanliang; Gladysiak, Andrzej; Stylianou, Kyriakos C.; Smit, Berend; Slater, Ben; Haranczyk, Maciej
In-plane strength enhancement of laminated composites via aligned carbon nanotube interlaminar reinforcement
de Villoria, R. Guzman; Hallander, P.; Ydrefors, L.; Nordin, P.; Wardle, B. L.
Silicone-modified phenolic resin: Relationships between molecular structure and curing behavior
Li, Cheng; Ma, Zhongzhu; Zhang, Xianwei; Fan, Hong; Wan, Jintao
Microstructure, texture and mechanical properties in a low carbon steel after ultrafast heating
Castro Cerda, F.; Goulas, C.; Sabirov, I.; Papaefthymiou, S.; Monsalve, A.; Petrov, R. H.
Origin of the reversed yield asymmetry in Mg-rare earth alloys at high temperature
Hidalgo-Manrique, P.; Herrera-Solaz, V.; Segurado, J.; Llorca, J.; Galvez, F.; Ruano, O. A.; Yi, S. B.; Perez-Prado, M. T.
Monotonic loading and fatigue response of a bio-based polyamide PA11 and a petrol-based polyamide PA12 manufactured by selective laser sintering
Salazar, A.; Rico, A.; Rodriguez, J.; Segurado Escudero, J.; Seltzer, R.; Martin de la Escalera Cutillas, F.
Hot deformation behavior and workability characteristics of AZ91 magnesium alloy powder compacts-A study using processing map
Jabbari Taleghani, M. A.; Torralba, J. M.
Biaxial Deformation Behavior and Enhanced Formability of Ultrafine-Grained Pure Copper
Moreno-Valle, E. C.; Monclus, M. A.; Molina-Aldareguia, J. M.; Enikeev, N.; Sabirov, I.
Importance of twin defect formation created by solid-phase epitaxial growth: An atomistic study
Martin-Bragado, Ignacio
In situ analysis of the tensile deformation mechanisms in extruded Mg-1Mn-1Nd (wt%)
Boehlert, C. J.; Chen, Z.; Chakkedath, A.; Gutierrez-Urrutia, I.; Llorca, J.; Bohlen, J.; Yi, S.; Letzig, D.; Perez-Prado, M. T.
Understanding Si(111) solid phase epitaxial regrowth using Monte Carlo modeling: Bi-modal growth, defect formation, and interface topology
Martin-Bragado, Ignacio; Sklenard, Benoit
Modeling of {311} facets using a lattice kinetic Monte Carlo three-dimensional model for selective epitaxial growth of silicon
Martin-Bragado, Ignacio; Moroz, Victor
Influence of grain boundaries on the radiation-induced defects and hydrogen in nanostructured and coarse-grained tungsten
Valles, G.; Panizo-Laiz, M.; Gonzalez, C.; Martin-Bragado, I.; Gonzalez-Arrabal, R.; Gordillo, N.; Iglesias, R.; Guerrero, C. L.; Perlado, J. M.; Rivera, A.
Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design
Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J.
Anisotropy, size, and aspect ratio effects on micropillar compression of Al-SiC nanolaminate composites
Mayer, C. R.; Yang, L. W.; Singh, S. S.; Llorca, J.; Molina-Aldareguia, J. M.; Shen, Y. L.; Chawla, N.
Synthesis of a Fe3O4 Nanosphere@Mg-Al Layered-Double-Hydroxide Hybrid and Application in the Fabrication of Multifunctional Epoxy Nanocomposites
Kalali, Ehsan Naderi; Wang, Xin; Wang, De-Yi
Strategy for severe friction stir processing to obtain acute grain refinement of an Al-Zn-Mg-Cu alloy in three initial precipitation states
Orozco-Caballero, A.; Hidalgo-Manrique, P.; Cepeda-Jimenez, C. M.; Rey, P.; Verdera, D.; Ruano, O. A.; Carreno, F.
An XFEM/CZM implementation for massively parallel simulations of composites fracture
Vigueras, Guillermo; Sket, Federico; Samaniego, Cristobal; Wu, Ling; Noels, Ludovic; Tjahjanto, Denny; Casoni, Eva; Houzeaux, Guillaume; Makradi, Ahmed; Molina-Aldareguia, Jon M.; Vazquez, Mariano; Jerusalem, Antoine
Computational study of atomic mobility for bcc phase in Ti-Al-Fe system
Chen, Yi; Li, Jinshan; Tang, Bin; Kou, Hongchao; Segurado, J.; Cui, Yuwen
Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension
Munoz, R.; Martinez, V.; Sket, F.; Gonzalez, C.; LLorca, J.
Relationship Between the 3D Porosity and beta-Phase Distributions and the Mechanical Properties of a High Pressure Die Cast AZ91 Mg Alloy
Biswas, Somjeet; Sket, Federico; Chiumenti, Michele; Gutierrez-Urrutia, Ivan; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria
Multiscale modelling of the morphology and spatial distribution of theta’ precipitates in Al-Cu alloys
Liu, H.; Bellon, B.; LLorca, J.
Sustainable, Biobased Silicone with Layered Double Hydroxide Hybrid and Their Application in Natural-Fiber Reinforced Phenolic Composites with Enhanced Performance
Li, Cheng; Wan, Jintao; Pan, Ye-Tang; Zhao, Peng-Cheng; Fan, Hong; Wang, De-Yi
Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials
Medina M, Carlos; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Melendrez, Manuel F.; Flores, Paulo; LLorca, Javier
Bio-based barium alginate film: Preparation, flame retardancy and thermal degradation behavior
Liu, Yun; Zhang, Chuan-Jie; Zhao, Jin-Chao; Guo, Yi; Zhu, Ping; Wang, De-Yi
Effect of anisotropic microstructure of a 12Cr-ODS steel on the fracture behaviour in the small punch test
Altstadt, E.; Serrano, M.; Houska, M.; Garcia-Junceda, A.
In silico design and screening of hypothetical MOF-74 analogs and their experimental synthesis
Witman, Matthew; Ling, Sanliang; Anderson, Samantha; Tong, Lianheng; Stylianou, Kyriakos C.; Slater, Ben; Smit, Berend; Haranczyk, Maciej
Effect of manganese and cobalt ions on flame retardancy and thermal degradation of bio-based alginate films
Liu, Yun; Zhao, Jin-Chao; Zhang, Chuan-Jie; Guo, Yi; Zhu, Ping; Wang, De-Yi
High temperature deformation mechanisms in pure magnesium studied by nanoindentation
Sanchez-Martin, R.; Zambaldi, C.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.
Comparative study on synergistic effect of LDH and zirconium phosphate with aluminum trihydroxide on flame retardancy of EVA composites
Kalali, Ehsan Naderi; De Juan, Sergio; Wang, Xin; Nie, Shibin; Wang, Rui; Wang, De-Yi
The influence of high grain boundary density on helium retention in tungsten
Valles, G.; Gonzalez, C.; Martin-Bragado, I.; Iglesias, R.; Perlado, J. M.; Rivera, A.
Finite element modeling of fretting wear scars in the thin steel wires: Application in crossed cylinder arrangements
Cruzado, A.; Urchegui, M. A.; Gomez, X.
An experimental study on the mechanism of texture evolution during hot-rolling process in a beta titanium alloy
Kou, Hongchao; Chen, Yi; Tang, Bin; Cui, Yuwen; Sun, Feng; Li, Jinshan; Xue, Xiangyi
Real time monitoring of click chemistry self-healing in polymer composites
Yue, H. -B.; Fernandez-Blazquez, J. P.; Beneito, D. F.; Vilatela, J. J.
Molecular dynamics modeling and simulation of void growth in two dimensions
Chang, H-J; Segurado, J.; Rodriguez de la Fuente, O.; Pabon, B. M.; Lorca, J. L.
Bounds for nonlinear composites via iterated homogenization
Ponte Castaneda, P.
Microstructure and thermostability of a W-Cu nanocomposite produced via high-pressure torsion
Edwards, D.; Sabirov, I.; Sigle, W.; Pippan, R.
Microtomographic investigation of damage in E911 steel after long term creep
Sket, F.; Dzieciol, K.; Borbely, A.; Kaysser-Pyzalla, A. R.; Maile, K.; Scheck, R.
Fire response of polyamide 6 with layered and fibrillar nanofillers
Cai, Guipeng; Dasari, Aravind; Yu, Zhong-Zhen; Du, Xusheng; Dai, Shaocong; Mai, Yiu-Wing; Wang, Jiyang
Structural composites for multifunctional applications: Current challenges and future trends
Gonzalez, C.; Vilatela, J. J.; Molina-Aldareguia, J. M.; Lopes, C. S.; LLorca, J.
Interfacial crystallization of isotactic polypropylene surrounding macroscopic carbon nanotube and graphene fibers
Abdou, John P.; Reynolds, Karina J.; Pfau, Michaela R.; van Staden, Justin; Braggin, Gregory A.; Tajaddod, Navid; Minus, Marilyn; Reguero, Victor; Vilatela, Juan J.; Zhang, Shanju
Temperature and stain rate effect on the deformation of nanostructured pure titanium
Rodriguez-Galan, D.; Sabirov, I.; Segurado, J.
Comparative study of the synergistic effect of binary and ternary LDH with intumescent flame retardant on the properties of polypropylene composites
Wang, Xin; Spoerer, Yvonne; Leuteritz, Andreas; Kuehnert, Ines; Wagenknecht, Udo; Heinrich, Gert; Wang, De-Yi
Bio-based nickel alginate and copper alginate films with excellent flame retardancy: preparation, flammability and thermal degradation behavior
Liu, Yun; Zhao, Jin-Chao; Zhang, Chuan-Jie; Guo, Yi; Cui, Li; Zhu, Ping; Wang, De-Yi
Effect of layer thickness on the high temperature mechanical properties of Al/SiC nanolaminates
Lotfian, S.; Mayer, C.; Chawla, N.; Llorca, J.; Misra, A.; Baldwin, J. K.; Molina-Aldareguia, J. M.
Anisotropy of uni-axial and bi-axial deformation behavior of pure Titanium after hydrostatic extrusion
Moreno-Valle, E. C.; Pachla, W.; Kulczyk, M.; Savoini, B.; Monge, M. A.; Ballesteros, C.; Sabirov, I.
Effect of a binder system on the low-pressure powder injection moulding of water-soluble zircon feedstocks
Hidalgo, J.; Abajo, C.; Jimenez-Morales, A.; Torralba, J. M.
Microstructure and hardness evolution in MAR-M247 Ni-based superalloy processed by controlled cooling and double heat treatment
Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat
Texture evolution and dynamic recrystallization in a beta titanium alloy during hot-rolling process
Chen, Yi; Li, Jinshan; Tang, Bin; Kou, Hongchao; Xue, Xiangyi; Cui, Yuwen
Understanding size effects on the strength of single crystals through high-temperature micropillar compression
Soler, Rafael; Wheeler, Jeffrey M.; Chang, Hyung-Jun; Segurado, Javier; Michler, Johann; Llorca, Javier; Molina-Aldareguia, Jon M.
Bio-based semi-aromatic polyamide/functional clay nanocomposites: preparation and properties
Shabanian, Meisam; Kang, Nianjun; Liu, Jianwen; Wagenknecht, Udo; Heinrich, Gert; Wang, De-Yi
Latent hardening size effect in small-scale plasticity
Bardella, Lorenzo; Segurado, Javier; Panteghini, Andrea; Llorca, Javier
Mechanical Characterization of Lead-Free Sn-Ag-Cu Solder Joints by High-Temperature Nanoindentation
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N.
Lean alloys in PM: from design to sintering performance
Oro, R.; Campos, M.; Torralba, J. M.; Capdevila, C.
Effect of Cu-doped graphene on the flammability and thermal properties of epoxy composites
Liu, Yun; Babu, Heeralal Vignesh; Zhao, Jianqing; Goni-Urtiaga, Asier; Sainz, Raquel; Ferritto, Rafael; Pita, Marcos; Wang, De-Yi
Thermal oxidative degradation kinetics of novel intumescent flame-retardant polypropylene composites
Nie, Shibin; Zhou, Can; Peng, Chao; Liu, Lei; Zhang, Chi; Dong, Xiang; Wang, De-yi
Transverse cracking of cross-ply laminates: A computational micromechanics perspective
Herraez, Miguel; Mora, Diego; Naya, Fernando; Lopes, Claudio S.; Gonzalez, Carlos; LLorca, Javier
Microstructure and mechanical properties of physical vapor deposited Cu/W nanoscale multilayers: Influence of layer thickness and temperature
Monclus, M. A.; Karlik, M.; Callisti, M.; Frutos, E.; LLorca, J.; Polcar, T.; Molina-Aldareguia, J. M.
Creep behaviour of injection moulded polyamide 6/organoclay nanocomposites by nanoindentation and cantilever-bending
Seltzer, Rocio; Mai, Yiu-Wing; Frontini, Patricia M.
Hierarchical TiO2 nanofibres as photocatalyst for CO2 reduction: Influence of morphology and phase composition on catalytic activity
Renones, Patricia; Moya, Alicia; Fresno, Fernando; Collado, Laura; Vilatela, Juan J.; de la Pena O'Shea, Victor A.
Deformation and energy dissipation mechanisms of needle-punched nonwoven fabrics: A multiscale experimental analysis
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Effect of Nd Additions on Extrusion Texture Development and on Slip Activity in a Mg-Mn Alloy
Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T.
Effect of Misorientation on the Compression of Highly Anisotropic Single-Crystal Micropillars
Soler, Rafael; Mikel Molina-Aldareguia, Jon; Segurado, Javier; LLorca, Javier
Mechanical properties of tungsten alloys with Y2O3 and titanium additions
Aguirre, M. V.; Martin, A.; Pastor, J. Y.; LLorca, J.; Monge, M. A.; Pareja, R.
Effect of the grain refinement via severe plastic deformation on strength properties and deformation behavior of an A16061 alloy at room and cryogenic temperatures
Moreno-Valle, E. C.; Sabirov, I.; Perez-Prado, M. T.; Murashkin, M. Yu.; Bobruk, E. V.; Valiev, R. Z.
Interdiffusion and Atomic Mobility for Face-Centered-Cubic Co-Al Alloys
Cui, Y. -W.; Tang, B.; Kato, R.; Kainuma, R.; Ishida, K.
Physically-sound simulation of low-velocity impact on fiber reinforced laminates
Lopes, C. S.; Sadaba, S.; Gonzalez, C.; Llorca, J.; Camanho, P. P.
Computational identification of organic porous molecular crystals
Evans, Jack D.; Huang, David M.; Haranczyk, Maciej; Thornton, Aaron W.; Sumby, Christopher J.; Doonan, Christian J.
Precipitation strengthening and reversed yield stress asymmetry in Mg alloys containing rare-earth elements: A quantitative study
Hidalgo-Manrique, P.; Robson, J. D.; Perez-Prado, M. T.
Effect of lamellar orientation on the strength and operating deformation mechanisms of fully lamellar TiAl alloys determined by micropillar compression
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon
Global and local deformation behavior and mechanical properties of individual phases in a quenched and partitioned steel
de Diego-Calderon, I.; De Knijf, D.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sabirov, I.; Foejer, C.; Petrov, R. H.
Prominent role of basal slip during high-temperature deformation of pure Mg polycrystals
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Carreno, F.; Perez-Prado, M. T.
Modeling Lightning Impact Thermo-Mechanical Damage on Composite Materials
Munoz, Raul; Delgado, Sofia; Gonzalez, Carlos; Lopez-Romano, Bernardo; Wang, De-Yi; LLorca, Javier
Iterated linear comparison bounds for viscoplastic porous materials with ellipsoidal microstructures
Agoras, M.; Ponte Castaneda, P.
Numerical investigation to prevent crack jumping in Double Cantilever Beam tests of multidirectional composite laminates
Sebaey, T. A.; Blanco, N.; Lopes, C. S.; Costa, J.
Billion-atom synchronous parallel kinetic Monte Carlo simulations of critical 3D Ising systems
Martinez, E.; Monasterio, P. R.; Marian, J.
Void growth in copper during high-temperature power-law creep
Dzieciol, K.; Borbely, A.; Sket, F.; Isaac, A.; Di Michiel, M.; Cloetens, P.; Buslaps, Th; Pyzalla, A. R.
Hierarchical nanoporous silica doped with tin as novel multifunctional hybrid material to flexible poly(vinyl chloride) with greatly improved flame retardancy and mechanical properties
Pan, Ye-Tang; Trempont, Cedric; Wang, De-Yi
Impact of halogen-free flame retardant with varied phosphorus chemical surrounding on the properties of diglycidyl ether of bisphenol-A type epoxy resin: synthesis, fire behaviour, flame-retardant mechanism and mechanical properties
Zhao, Xiaomin; Babu, Heeralal Vignesh; Llorca, Javier; Wang, De-Yi
Effect of indentation size on the nucleation and propagation of tensile twinning in pure magnesium
Sanchez-Martin, R.; Perez-Prado, M. T.; Segurado, J.; Molina-Aldareguia, J. M.
A computational model coupling mechanics and electrophysiology in spinal cord injury
Jerusalem, Antoine; Garcia-Grajales, Julian A.; Merchan-Perez, Angel; Pena, Jose M.
Diffusion Research in BCC Ti-Al-Mo Ternary Alloys
Chen, Yi; Tang, Bin; Xu, Guanglong; Wang, Chuanyun; Kou, Hongchao; Li, Jinshan; Cui, Yuwen
Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion
Jabbari Taleghani, M. A.; Ruiz Navas, E. M.; Torralba, J. M.
Damage resistance and damage tolerance of dispersed CFRP laminates: Effect of ply clustering
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J.
Continuum modeling of a neuronal cell under blast loading
Jerusalem, Antoine; Dao, Ming
The Influence of Intrinsic Framework Flexibility on Adsorption in Nanoporous Materials
Witman, Matthew; Ling, Sanliang; Jawahery, Sudi; Boyd, Peter G.; Haranczyk, Maciej; Slater, Ben; Smit, Berend
Enhancing the fracture resistance of carbon fiber reinforced SiC matrix composites by interface modification through a simple fiber heat-treatment process
Liu, H. T.; Yang, L. W.; Sun, X.; Cheng, H. F.; Wang, C. Y.; Mao, W. G.; Molina-Aldareguia, J. M.
Simultaneous synthesis of vertically aligned carbon nanotubes and amorphous carbon thin films on stainless steel
Romero, Pablo; Oro, Raquel; Campos, Monica; Torralba, Jose M.; Guzman de Villoria, Roberto
Computational micromechanics of the transverse and shear behavior of unidirectional fiber reinforced polymers including environmental effects
Naya, F.; Gonzalez, C.; Lopes, C. S.; Van der Veen, S.; Pons, F.
Synergistic Effect of Carbon Nanotube and Polyethersulfone on Flame Retardancy of Carbon Fiber Reinforced Epoxy Composites
Li, Cheng; Kang, Nian-Jun; Delgado Labrandero, Sofia; Wan, Jintao; Gonzalez, Carlos; Wane, De-Yi
High-temperature nanoindentation behavior of Al/SiC multilayers
Lotfian, S.; Molina-Aldareguia, J. M.; Yazzie, K. E.; Llorca, J.; Chawla, N.
Mechanical and electrical properties of an ultrafine grained Al-8.5 wt. % RE (RE=5.4 wt.% Ce, 3.1wt.% La) alloy processed by severe plastic deformation
Murashkin, M. Yu.; Sabirov, I.; Medvedev, A. E.; Enikeev, N. A.; Lefebvre, W.; Valiev, R. Z.; Sauvage, X.
Structure-property relationships of nanocornposites based on polylactide and MgAl layered double hydroxides
Leng, Jing; Purohit, Purv J.; Kang, Nianjun; Wang, De-Yi; Falkenhagen, Jana; Emmerling, Franziska; Thueneman, Andreas F.; Schoenhals, Andreas
One-step hydrothermal synthesis of nano zinc carbonate and its use as a promising substitute for antimony trioxide in flame retardant flexible poly(vinyl chloride)
Pan, Ye-Tang; Wang, De-Yi
A numerical study of the influence of microvoids in the transverse mechanical response of unidirectional composites
Vajari, Danial Ashouri; Gonzalez, Carlos; Llorca, Javier; Legarth, Brian Nyvang
An eco-friendly way to fire retardant flexible polyurethane foam: layer-by-layer assembly of fully bio-based substances
Wang, Xin; Pan, Ye-Tang; Wan, Jin-Tao; Wang, De-Yi
Interfacial load transfer in carbon nanotube/ceramic microfiber hybrid polymer composites
Lachman, Noa; Wiesel, Erica; Guzman de Villoria, Roberto; Wardle, Brian L.; Wagner, H. Daniel
