Oro, Raquel; Hryha, Eduard; Campos, Monica; Torralba, Jose M.
Menú
UNMODIFIED LDH AS REINFORCING FILLER FOR XNBR AND THE DEVELOPMENT OF FLAME-RETARDANT ELASTOMER COMPOSITES
Basu, Debdipta; Das, Amit; George, Jinu Jacob; Wang, De-Yi; Stoekelhuber, Klaus Werner; Wagenknecht, Udo; Leuteritz, Andreas; Kutlu, Burak; Reuter, Uta; Heintrich, Gert
Modeling of boron diffusion in silicon-germanium alloys using Kinetic Monte Carlo
Dopico, Ignacio; Castrillo, Pedro; Martin-Bragado, Ignacio
Landau model of the microstructure and shape memory properties of cubic-monoclinic-II martensite
Lee, Dong-Wook; Xu, Guanglong; Cui, Yuwen
Microvials with tungsten nanowire arrays
Drensler, Stefanie; Milenkovic, Srdjan; Hassel, Achim Walter
Insights into the production and characterization of electrospun fibers from regenerated silk fibroin
Solanas, Concepcion; Herrero, Sara; Dasari, Aravind; Plaza, Gustavo R.; Llorca, Javier; Perez-Rigueiro, Jose; Elices, Manuel; Guinea, Gustavo V.
Influence of the IR-mirror layer composition in the mechanical properties of solar selective coatings made from Mo:Si3N4 cermet
Alvarez-Fraga, L.; Monclus, M. A.; Molina-Aldareguia, J. M.; Sanchez-Garcia, J. A.; Cespedes, E.; Escobar-Galindo, R.; Prieto, C.
Synthesis of Binaphthyl-Based Push-Pull Chromophores with Supramolecularly Polarizable Acceptor Ends
Coluccini, Carmine; Terraneo, Giancarlo; Pasini, Dario
Physical Simulation of Investment Casting of Complex Shape Parts
Rahimian, Mehdi; Milenkovic, Srdjan; Maestro, Laura; Eguidazu Ruiz De Azua, Aitor; Sabirov, Ilchat
PHYSICAL SIMULATION OF COLD ROLLING OF ULTRA-FINE GRAINED AL 5083 ALLOY TO STUDY MICROSTRUCTURE EVOLUTION
Murashkin, M. Yu.; Enikeev, N. A.; Kazykhanov, V. U.; Sabirov, I.; Valiev, R. Z.
Experimental Investigation and Thermodynamic Modeling for the Mg-Nd-Sr System
Xu, Guanglong; Cui, Yuwen; Zeng, Lijun; Tao, Xiaoma; Liu, Libin; Jin, Zhanpeng
A hybrid molecular photoanode for efficient light – induced water oxidation
Grau, Sergi; Berardi, Serena; Moya, Alicia; Matheu, Roc; Cristino, Vito; Jose Vilatela, Juan; Bignozzi, Carlo A.; Caramori, Stefano; Gimbert-Surinach, Carolina; Llobet, Antoni
Computational study of atomic mobility for the bcc phase of the U-Pu-Zr ternary system
Li, Weibang; Hu, Rui; Cui, Y. -W.; Zhong, Hong; Chang, Hui; Li, Jinshan; Zhou, Lian
Continuum modeling of the reverse Hall-Petch effect in nanocrystalline metals under uniaxial tension: how many grains in a finite element model?
Jerusalem, Antoine
Effect of Accumulative Roll Bonding on Plastic Flow Properties of Commercially Pure Zirconium
Sabirov, I.; Molina-Aldareguia, J. M.; Jiang, L.; Kassner, M. E.; Perez-Prado, M. T.
A theoretical study of the structure-property relations in ultra-fine metallic materials with fractal microstructures
Sabirov, I.; Yang, C.; Mullins, J.; Hodgson, P. D.
Influence of device architecture on junction leakage in low-temperature process FDSOI MOSFETs
Sklenard, Benoit; Batude, Perrine; Rafhay, Quentin; Martin-Bragado, Ignacio; Xu, Cuiqin; Previtali, Bernard; Colombeau, Benjamin; Khaja, Fareen-Adeni; Cristoloveanu, Sorin; Rivallin, Pierrette; Tavernier, Clement; Poiroux, Thierry
Effect of strain rate on impact response and omega transformation of quenched Zr-Nb alloys
Wang, Yinghao; Tang, Bin; Cui, Y-W.; Kou, Hongchao; Li, Jinshan
Atomistic investigation of the impact of stress during solid phase epitaxial regrowth
Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Rivallin, Pierrette; Tavernier, Clement; Cristoloveanu, Sorin; Martin-Bragado, Ignacio
On the role of processing parameters in sintered new Co-based (W,Al) alloys
Carton-Cordero, M.; Srinivasarao, B.; Campos, M.; Garcia-Junceda, A.; Torralba, J. M.
The role of mesophases in the ordering of polymers
Perez, E.; Cerrada, M. L.; Garcia-Penas, A.; Gomez-Elvira, J. M.; Fernandez-Blazquez, J. P.; Martinez-Gomez, A.; Lopez-Velazquez, D.; Martinez, J. C.
X-ray computed tomography analysis of damage evolution in open hole carbon fiber-reinforced laminates subjected to in-plane shear
Sket, F.; Enfedaque, A.; Diaz Lopez, C.; Gonzalez, C.; Molina-Aldareguia, J.; LLorca, J.
Atomistic modeling of epitaxial growth of semiconductor materials
Martin-Bragado, Ignacio; Sarikov, Andrey
Development of tool for physical simulation of skin formation during investment casting of nickel-based superalloys
Rahimian, M.; Milenkovic, S.; Maestro, L.; Ruiz De Azua, A. Eguidazu; Sabirov, I.
Mechanisms of in-plane shear deformation in hybrid three-dimensional woven composites
Munoz, R.; Gonzalez, C.; Llorca, J.
Effect of Zirconium on the Microstructure and Mechanical Properties of an Al-Alloyed ODS Steel Consolidated by FAHP
Garcia-Junceda, Andrea; Garcia-Rodriguez, Nerea; Campos, Monica; Carton-Cordero, Marta; Torralba, Jose Manuel
Synchronous parallel Kinetic Monte Carlo: Implementation and results for object and lattice approaches
Martin-Bragado, Ignacio; Abujas, J.; Galindo, P. L.; Pizarro, J.
A numerical method for the time coarsening of transport processes at the atomistic scale
Gonzalez-Ferreiro, B.; Romero, I.; Ortiz, M.
Branched 1,6-Diaminohexane-Derived Aliphatic Polyamine as Curing Agent for Epoxy: Isothermal Cure, Network Structure, and Mechanical Properties
Wan, Jintao; Li, Cheng; Fang, Hong; Li, Bo-Geng
Modeling adsorption of brominated, chlorinated and mixed bromo/chloro-dibenzo-p-dioxins on C-60 fullerene using Nano-QSPR
Urbaszek, Piotr; Gajewicz, Agnieszka; Sikorska, Celina; Haranczyk, Maciej; Puzyn, Tomasz
Indirect improvement of high temperature mechanical properties of a Mg-based alloy Elektron2l by addition of AIN nanoparticles
Daudin, R.; Terzi, S.; Mallmann, C.; Martin, R. Sanchez; Lhuissier, P.; Boller, E.; Pacureanu, A.; Katsarou, L.; Dieringa, H.; Salvo, L.
Multifunctional Nano-engineered Polymer Surfaces with Enhanced Mechanical Resistance and Superhydrophobicity
Hernandez, Jaime J.; Monclus, Miguel A.; Navarro-Baena, Ivan; Viela, Felipe; Molina-Aldareguia, Jon M.; Rodriguez, Isabel
Fabric compaction and infiltration during vacuum-assisted resin infusion with and without distribution medium
Vila, Joaquim; Gonzalez, Carlos; LLorca, Javier
Influence of free surfaces on microstructure evolution of radiation damage in Fe from molecular dynamics and object kinetic Monte Carlo calculations
Aliaga, Maria J.; Dopico, Ignacio; Martin-Bragado, Ignacio; Caturla, Maria J.
Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding
Amirkhanlou, Sajjad; Rahimian, Mehdi; Ketabchi, Mostafa; Parvin, Nader; Yaghinali, Parisa; Carreno, Fernando
Characterization of catalytic materials with scanning photoelectron microscopy: Present and future
Amati, M.; Aleman, B.; Bozzini, B.; Gregoratti, L.; Sezen, H.; Kiskinova, M.
Landau modeling of dynamical nucleation of martensite at grain boundaries under local stress
Xu, Guanglong; Wang, Chuanyun; Ignacio Beltran, Juan; LLorca, Javier; Cui, Yuwen
Predicting epitaxial orientations and lattice structure in ultrathin magnetic thin films
Lu, Yong; Wang, Cuiping; Shi, Rongpei; Cui, Yuanyuan; Shi, Zhan; Yang, Shuiyuan; Cui, Yuwen; Liu, Xingjun
Novel experimental procedure and determination of full displacement fields of delaminating composite layer interfaces for evaluation of the mode II cohesive law
Czel, Gergely; Jalalvand, Meisam; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier
Merging Biology and Solid-State Lighting: Recent Advances in Light-Emitting Diodes Based on Biological Materials
Fresta, Elisa; Fernandez-Luna, Veronica; Coto, Pedro B.; Costa, Ruben D.
Modelling of the mechanical behavior of polyurethane foams by means of micromechanical characterization and computational homogenization
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Deformation mechanisms in an ultra-fine grained Al alloy
Sabirov, Ilchat; Barnett, Matthew R.; Estrin, Yuri; Timokhina, Ilana; Hodgson, Peter D.
A carbon science perspective in 2018: Current achievements and future challenges
Bianco, Alberto; Chen, Yongsheng; Chen, Yuan; Ghoshal, Debjit; Hurt, Robert H.; Kim, Yoong Ahm; Koratkar, Nikhil; Meunier, Vincent; Terrones, Mauricio
Strength and toughness of cellular SiC at elevated temperature
Presas, M.; Pastor, J. Y.; LLorca, J.; Martin, A.; Segurado, J.; Gonzalez, C.
Characterization of creep and creep damage by in-situ microtomography
Borbely, Andras; Dzieciol, Krzysztof; Sket, Federico; Isaac, Augusta; di Michiel, Marco; Buslaps, Thomas; Kaysser-Pyzalla, Anke R.
Nanostructuring of Ultra-Thin HfO(2) Layers for High-k/III-V Device Application
Benedicto, M.; Anguita, J.; Alvaro, R.; Galiana, B.; Molina-Aldereguia, J. M.; Tejedor, P.
Multi-scale homogenization-based modeling of semi-crystalline polymers
Agoras, M.; Ponte Castaneda, P.
DAMAGE LOCALIZATION AND FAILURE LOCUS UNDER BIAXIAL LOADING IN GLASS-FIBER NONWOVEN FELTS
Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier
Phase equilibria in Mg-rich corner of Mg-Ca-RE (RE=Gd, Nd) systems at 400 degrees C
Fei, Hou-jun; Xu, Guang-long; Liu, Li-bin; Bo, Hong; Zeng, Li-jun; Chen, Cui-ping
An analysis of the influence of grain size on the strength of FCC polycrystals by means of computational homogenization
Haouala, Sarra; Segurado, Javier; LLorca, Javier
Modelling and simulation methodology for unidirectional composite laminates in a Virtual Test Lab framework
Falco, O.; Avila, R. L.; Tijs, B.; Lopes, C. S.
Effect on thermal and combustion behaviors of montmorillonite intercalation nickel compounds in polypropylene/IFR system
Kong, Qinghong; Zhang, Hongkai; Zheng, Lu; Wang, De-Yi; Zhang, Junhao
Fabrication of low-fire-hazard flexible poly (vinyl chloride) via reutilization of heavy metal biosorbents
Pan, Ye-Tang; Wang, De-Yi
From Solidification Processing to Microstructure to Mechanical Properties: A Multi-scale X-ray Study of an Al-Cu Alloy Sample
Tourret, D.; Mertens, J. C. E.; Lieberman, E.; Imhoff, S. D.; Gibbs, J. W.; Henderson, K.; Fezzaa, K.; Deriy, A. L.; Sun, T.; Lebensohn, R. A.; Patterson, B. M.; Clarke, A. J.
Deformation Mechanism Map of Cu/Nb Nanoscale Metallic Multilayers as a Function of Temperature and Layer Thickness
Snel, J.; Monclus, M. A.; Castillo-Rodriguez, M.; Mara, N.; Beyerlein, I. J.; Llorca, J.; Molina-Aldareguia, J. M.
Mechanical properties of metal-ceramic nanolaminates: Effect of constraint and temperature
Yang, L. W.; Mayer, C.; Li, N.; Baldwin, J. K.; Mara, N. A.; Chawla, N.; Molina-Aldareguia, J. M.; Llorca, J.
Influence of 3D connectivity of rigid phases on damage evolution during tensile deformation of an AlSi12Cu4Ni2 piston alloy
Bugelnig, Katrin; Sket, Federico; Germann, Holger; Steffens, Thomas; Koos, Robert; Wilde, Fabian; Boller, Elodie; Requena, Guillermo
High throughput analysis of solute effects on the mechanical behavior and slip activity of beta titanium alloys
Wang, C. Y.; Yang, L. W.; Cui, Y. -W.; Perez-Prado, M. T.
The cavitation erosion of ultrasonic sonotrode during large-scale metallic casting: Experiment and simulation
Tian, Yang; Liu, Zhilin; Li, Xiaoqian; Zhang, Lihua; Li, Ruiqing; Jiang, Ripeng; Dong, Fang
Interdiffusion in FCC Co-Al-Ti Ternary Alloys
Chen, Yi; Li, Jinshan; Tang, Bin; Xu, Guanglong; Kou, Hongchao; Cui, Yuwen
Investigation of thermophysical, electronic and lattice dynamic properties for CaX2Si2 (X = Ni, Zn, Cu, Ag, Au) via first-principles calculations
Tao, Xiaoma; Guo, Zifeng; Xu, Guanglong; Wang, Rongcheng; Chen, Hongmei; Ouyang, Yifang
Formation of size-controlled and luminescent Si nanocrystals from SiOxNy/Si3N4 hetero-superlattices
Zelenina, A.; Sarikov, A.; Gutsch, S.; Zakharov, N.; Werner, P.; Reichert, A.; Weiss, C.; Zacharias, M.
In situ tomographic investigation of damage development in +/- 45 degrees carbon fibre reinforced laminates
Sket, F.; Rodriguez-Hortala, M.; Molina-Aldareguia, J. M.; Llorca, J.; Maire, E.; Requena, G.
Strain rate sensitivity and deformation activation volume of coarse-grained and ultrafine-grained TiNi alloys
Gunderov, D. V.; Maksutova, G.; Churakova, A.; Lukyanov, A.; Kreitcberg, A.; Raab, G. I.; Sabirov, I.; Prokoshkin, S.
Multiscale tomographic analysis of heterogeneous cast Al-Si-X alloys
Asghar, Z.; Requena, G.; Sket, F.
Tailoring master alloys for liquid phase sintering: Effect of introducing oxidation-sensitive elements
Calderon, Raquel De Oro; Bernardo, Elena; Campos, Monica; Gierl-Mayer, Christian; Danninger, Herbert; Torralba, Jose M.
Ultra-fine grained pure Titanium for biomedical applications
Mora-Sanchez, H.; Sabirov, I.; Monclus, M. A.; Matykina, E.; Molina-Aldareguia, J. M.
An atomistic investigation of the composition dependence in SiGe alloys during Solid Phase Epitaxial Regrowth
Payet, Anthony; Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Tavernier, Clement; Gergaud, Patrice; Martin-Bragado, Ignacio
Onset of room temperature ferromagnetism by plastic deformation in three paramagnetic pure metals
Cepeda-Jimenez, C. M.; Hernando, A.; Barandiaran, J. M.; Perez-Prado, M. T.
RETRACTED: Atomistic simulation of damage accumulation and amorphization in Ge(Retracted article.See vol.121,ARTN 049901,2017)
Gomez-Selles, Jose L.; Claverie, Alain; Sklenard, Benoit; Benistant, Francis; Martin-Bragado, Ignacio
Mono- and dinuclear europium(III) complexes with thenoyltrifluoroacetone and 1,10-phenanthroline-5,6-dione
Zhang, Xiao-Fang; Xu, Cun-Jin; Wan, Jintao
Degradation of alumina refractory bricks by sintering Mn low-alloy steels
Campos, Monica; Antonio Sicre-Artalejo, Jose; Manuel Torralba, Jose; Zbiral, Hannes; Danninger, Herbert; Pena, P.
A Novel High-throughput Technique for Establishing the Solidification-Microstructure Relationships
Milenkovic, Srdjan; Rahimian, Mehdi; Sabirov, Ilchat
Toward high performance in Powder Metallurgy
Torralba, Jose M.; Campos, Monica
Very strong pure titanium by field assisted hot pressing of dual phase powders
Srinivasarao, B.; Torralba, J. M.; Taleghani, M. A. Jabbari; Perez-Prado, M. T.
Optimisation of eco-friendly binary binder system for powder injection moulding
Abajo, C.; Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M.
Capability of mechanical alloying and SPS technique to develop nanostructured high Cr, Al alloyed ODS steels
Garcia-Rodriguez, N.; Campos, M.; Torralba, J. M.; Berger, M. H.; Bienvenu, Y.
Microstructure evolution and mechanical behavior of as-cast, heat treated and directionally solidified Fe-15Al-10Nb alloys
Yang, Guang; Milenkovic, Srdjan
Neurite, a Finite Difference Large Scale Parallel Program for the Simulation of Electrical Signal Propagation in Neurites under Mechanical Loading
Garcia-Grajales, Julian A.; Rucabado, Gabriel; Garcia-Dopico, Antonio; Pena, Jose-Maria; Jerusalem, Antoine
Micro-mechanical properties and interfacial engineering of SiC fiber reinforced sol-gel fabricated mullite matrix composites
Han, S.; Yang, L. W.; Liu, H. T.; Sun, X.; Jiang, R.; Mao, W. G.; Chen, Z. H.
Low thermal and high electrical conductivity in hollow glass microspheres covered with carbon nanofiber-polymer composites
Herrera-Ramirez, Luis C.; Cano, Manuela; Guzman de Villoria, Roberto
Functionalized allylamine polyphosphate as a novel multifunctional highly efficient fire retardant for polypropylene
Xiao, Dan; Li, Zhi; Gohs, Uwe; Wagenknecht, Udo; Voita, Brigitte; Wang, De-Yi
Simultaneously improving the fire safety and mechanical properties of epoxy resin with Fe-CNTs via large-scale preparation
Zhang, Junhao; Kong, Qinghong; Wang, De-Yi
Xenon Gas Separation and Storage Using Metal-Organic Frameworks
Banerjee, Debasis; Simon, Cory M.; Elsaidi, Sameh K.; Haranczyk, Maciej; Thallapally, Praveen K.
Contextualizing yellow light-emitting electrochemical cells based on a blue-emitting imidazo-pyridine emitterd
Fresta, Elisa; Volpi, Giorgio; Garino, Claudio; Barolo, Claudia; Costa, Ruben D.
Microstructure-based fatigue life model of metallic alloys with bilinear Coffin-Manson behavior
Cruzado, A.; Lucarini, S.; LLorca, J.; Segurado, J.
Ferrocene-Based Nonphosphorus Copolymer: Synthesis, High-Charring Mechanism, and Its Application in Fire Retardant Epoxy Resin
Liao, Dui-Jun; Xu, Qi-Kui; McCabe, Richard W.; Babu, Heeralal Vignesh; Hu, Xiao-Ping; Pan, Ning; Wang, De-Yi; Hull, T. Richard
Out-of-Oblivion Cage Molecules and Their Porous Crystalline Phases
Garcia, Ismael Gomez; Bernabei, Marco; Soto, Raul Perez; Haranczyk, Maciej
Thermodynamic modeling of nitrate materials for hybrid thermal energy storage: Using latent and sensible mechanisms
Ignacio Beltran, Juan; Wang, Jingya; Montero-Chacon, Francisco; Cui, Yuwen
Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg
Jin, Bo Cheng; Li, Xiaochen; Jain, Atul; Gonzalez, Carlos; LLorca, Javier; Nutt, Steven
Diffusion Research in BCC Ti-Al-Ni Ternary Alloys
Gao, Bo; Gu, Yuanyu; Wu, Qiaojun; Guo, Yanhua; Cui, Yuwen
Effect of Fe3O4-doped sepiolite on the flammability and thermal degradation properties of epoxy composites
Liu, Yun; Kong, Qing-Hong; Zhao, Xiao-Min; Zhu, Ping; Zhao, Jianqing; Esteban-Cubillo, Antonio; Santaren, Julio; Wang, De-Yi
Carbon nanotube fibers with martensite and austenite Fe residual catalyst: room temperature ferromagnetism and implications for CVD growth
Aleman, B.; Ranchal, R.; Reguero, V.; Mas, B.; Vilatela, J. J.
Cell survival and differentiation with nanocrystalline glass-like carbon using substantia nigra dopaminergic cells derived from transgenic mouse embryos
Rodriguez-Losada, Noela; Romero, Pablo; Estivill-Torrus, Guillermo; Guzman de Villoria, Roberto; Aguirre, Jose A.
Tuning the magnetic properties of pure hafnium by high pressure torsion
Cepeda-Jimenez, C. M.; Beltran, J. I.; Hernando, A.; Garcia, M. A.; Yndurain, F.; Zhilyaev, A.; Perez-Prado, M. T.
TCNQ Grown on Cu (001): Its Atomic and Electronic Structure Determination
Capitan, M. J.; Navio, C.; Beltran, J. I.; Otero, R.; Alvarez, J.
Micro-macro mechanical relations in Palmetto wood by numerical homogenisation
Saavedra Flores, Erick I.; Haldar, Sandip
The formation mechanism of eutectic microstructures in NiAl-Cr composites
Tang, Bin; Cogswell, Daniel A.; Xu, Guanglong; Milenkovic, Srdjan; Cui, Yuwen
Strength and toughness of structural fibres for composite material reinforcement
Herraez, M.; Fernandez, A.; Lopes, C. S.; Gonzalez, C.
Simultaneously enhancing the flame retardancy and toughness of epoxy by lamellar dodecyl-ammonium dihydrogen phosphate
Zhuang, Rong-Chuan; Yang, Juan; Wang, De-Yi; Huang, Ya-Xi
Thermostructural behaviour of Ni-Cr materials: modelling of bulk and nanoparticle systems
Ortiz-Roldan, Jose M.; Rabdel Ruiz-Salvador, A.; Calero, Sofia; Montero-Chacon, Francisco; Garcia-Perez, Elena; Segurado, Javier; Martin-Bragado, Ignacio; Hamad, Said
Physical Simulation of Hot Rolling of Ultra-fine Grained Pure Titanium
Polyakov, Alexander; Gunderov, Dmitry; Sitdikov, Vil'; Valiev, Ruslan; Semenova, Irina; Sabirov, Ilchat
Tip Shape Effect on Hot Nanoindentation Hardness and Modulus Measurements
Alberto Monclus, Miguel; Lotfian, Saeid; Mikel Molina-Aldareguia, Jon
Microtomographic assessment of damage in P91 and E911 steels after long-term creep
Renversade, Loic; Ruoff, Herbert; Maile, Karl; Sket, Federico; Borbely, Andras
Process modeling of stress and chemical effects in SiGe alloys using kinetic Monte Carlo
Zographos, Nikolas; Martin-Bragado, Ignacio
Shrinkage kinetics during early stage sintering of cold isostatically compacted iron powder
Molinari, A.; Bisoffi, E.; Menapace, C.; Torralba, J.
Microstructure features and mechanical properties of a UFG Al-Mg-Si alloy produced via SPD
Bobruk, E.; Sabirov, I.; Kazykhanov, V.; Valiev, R.; Murashkin, M.
Computational modeling of high performance steel fiber reinforced concrete using a micromorphic approach
Huespe, A. E.; Oliver, J.; Mora, D. F.
Lattice Kinetic Modeling of the Anisotropic Growth of Two-Dimensional Islands on Barite (001) Surface
de Antonio Gomez, Santiago; Pina, Carlos M.; Martin-Bragado, Ignacio
Thermal stability of {110} facet terminated gold nanobelts
Chen, Ying; Milenkovic, Srdjan; Hassel, Achim Walter
Failure locus of polypropylene nonwoven fabrics under in-plane biaxial deformation
Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier
Effect of water conditioning on the fracture behavior of PA12 composites processed by selective laser sintering
Seltzer, Rocio; Martin de la Escalera, Federico; Segurado, Javier
Multi-technique characterisation of MOVPE-grown GaAs on Si
Wong, C. S.; Bennett, N. S.; McNally, P. J.; Galiana, B.; Tejedor, P.; Benedicto, M.; Molina-Aldareguia, J. M.; Monaghan, S.; Hurley, P. K.; Cherkaoui, K.
Metal Matrix Composites reinforced with nano-size reinforcements
Molina-Aldareguia, Jon M.; Reyes Elizalde, M.
HIGH STRENGTH ULTRA-FINE GRAINED TITANIUM PRODUCED VIA A NOVEL SPD PROCESSING ROUTE
Molina-Aldareguia, J. M.; Perez-Prado, M. T.; Valiev, R. Z.; Semenova, I. P.; Sabirov, I.
Hollow waveguide-based full-field absorbance biosensor
Cadarso, V. J.; Llobera, A.; Fernandez-Sanchez, C.; Darder, M.; Dominguez, C.
Tunable Fano Resonance and Plasmon-Exciton Coupling in Single Au Nanotriangles on Monolayer WS2 at Room Temperature
Wang, Mingsong; Krasnok, Alex; Zhang, Tianyi; Scarabelli, Leonardo; Liu, He; Wu, Zilong; Liz-Marzan, Luis M.; Terrones, Mauricio; Alu, Andrea; Zheng, Yuebing
Tunable Resonance Coupling in Single Si Nanoparticle-Monolayer WS2 Structures
Lepeshov, Sergey; Wang, Mingson; Krasnok, Alex; Kotov, Oleg; Zhang, Tianyi; Liu, He; Jiang, Taizhi; Korgel, Brian; Terrones, Mauricio; Zheng, Yuebing; Alu, Andrea
Ultrafine nickel nanocatalyst-engineering of an organic layered double hydroxide towards a super-efficient fire-safe epoxy resin via interfacial catalysis
Li, Zhi; Zhang, Junhao; Dufosse, Francois; Wang, De-Yi
Modeling microstructural effects in dilatational plasticity of polycrystalline materials
Lebensohn, Ricardo A.; Idiart, Martin I.; Ponte Castaneda, Pedro
Thermal stability of nanostructured iron powder as a function of amount and nature of reinforcement (Nb or NbC)
Fuentes-Pacheco, L.; Campos, M.; Torralba, J. M.
Numerical simulations of void linkage in model materials using a nonlocal ductile damage approximation
Weck, Arnaud; Segurado, Javier; LLorca, Javier; Wilkinson, David; Boehm, Helmut
Microstructure and properties of dense Tyranno-ZMI SiC/SiC containing Ti3Si(Al)C-2 with plastic deformation toughening mechanism
Ma, Xiaokang; Yin, Xiaowei; Fan, Xiaomeng; Sun, Xinnan; Yang, Lingwei; Ye, Fang; Cheng, Laifei
Gas-Phase Functionalization of Macroscopic Carbon Nanotube Fiber Assemblies: Reaction Control, Electrochemical Properties, and Use for Flexible Supercapacitors
Iglesias, Daniel; Senokos, Evgeny; Aleman, Belen; Cabana, Laura; Navio, Cristina; Marcilla, Rebeca; Prato, Maurizio; Vilatela, Juan J.; Marchesan, Silvia
Xenon Recovery at Room Temperature using Metal-Organic Frameworks
Elsaidi, Sameh K.; Ongari, Daniele; Xu, Wenqian; Mohamed, Mona H.; Haranczyk, Maciej; Thallapally, Praveen K.
Study of the synergistic effect of nickel phosphate nanotubes (NiPO-NT) on intumescent flame retardant polypropylene composites
Dong, Xiang; Nie, ShiBin; Liu, ZeGong; Wang, De-yi
Transglutaminase catalyzed hydrolyzed wheat gliadin grafted with chitosan oligosaccharide and its characterization
Jiang, Wen; Zhou, Zhiming; Wang, Dan; Zhou, Xiaohua; Tao, Renyou; Yang, Yang; Shi, Yexin; Zhang, Guiluo; Wang, Deyi; Zhou, Zhen
Three dimensional (3D) microstructure-based finite element modeling of Al-SiC nanolaminates using focused ion beam (FIB) tomography
Mayer, Carl R.; Molina-Aladareguia, Jon; Chawla, Nikhilesh
A multiscale micromechanical model of needlepunched nonwoven fabrics
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Notch effect in failure of fiberglass non-woven materials
Chen, Yinglong; Ridruejo, Alvaro; Gonzalez, Carlos; Llorca, Javier; Siegmund, Thomas
Histological response of soda-lime glass-ceramic bactericidal rods implanted in the jaws of beagle dogs
Moya, Jose S.; Martinez, Arturo; Lopez-Piriz, Roberto; Guitian, Francisco; Diaz, Luis A.; Esteban-Tejeda, Leticia; Cabal, Belen; Sket, Federico; Fernandez-Garcia, Elisa; Tomsia, Antoni P.; Torrecillas, Ramon
Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium
Pushkareva, Marina; Adrien, Jerome; Maire, Eric; Segurado, Javier; Llorca, Javier; Weck, Arnaud
History and Utility of Zeolite Framework-Type Discovery from a Data-Science Perspective
Zimmermann, Nils E. R.; Haranczyk, Maciej
Recrystallization Behavior at Diffusion Bonding Interface of High Nb Containing TiAl Alloy
Tang, Bin; Qi, Xian Sheng; Kou, Hong Chao; Li, Jin Shan; Milenkovic, Srdjan
A new strain rate dependent continuum framework for Mg alloys
Andres Garcia-Grajales, Julian; Fernandez, Ana; Leary, Duncan; Jerusalem, Antoine
Influence of fiber orientation on the ballistic performance of needlepunched nonwoven fabrics
Martinez-Hergueta, F.; Ridruejo, A.; Galvez, F.; Gonzalez, C.; LLorca, J.
Deformation mechanisms of ultra-thin Al layers in Al/SiC nanolaminates as a function of thickness and temperature
Yang, L. W.; Mayer, C.; Chawla, N.; Llorca, J.; Molina-Aldareguia, J. M.
Strength ceiling smashed for light metals
Perez Prado, Maria Teresa; Cepeda-Jimenez, Carmen M.
A multiscale approach to defect evolution in tungsten under helium irradiation
Valles, G.; Cazalilla, A. L.; Gonzalez, C.; Martin-Bragado, I.; Prada, A.; Iglesias, R.; Perlado, J. M.; Rivera, A.
A novel high-content CNT-reinforced SiC matrix composite-fiber by precursor infiltration and pyrolysis process
Zhang, X. S.; Yang, L. W.; Liu, H. T.; Zu, M.
Interface Characterization in Fiber-Reinforced Polymer-Matrix Composites
Naya, F.; Molina-Aldareguia, J. M.; Lopes, C. S.; Gonzalez, C.; Llorca, J.
Selective oxidation-induced strengthening of Zr/Nb nanoscale multilayers
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Llorca, J.; Molina-Aldareguia, J. M.
Energy dissipation during delamination in composite materials – An experimental assessment of the cohesive law and the stress-strain field ahead of a crack tip
Jalalvand, Meisam; Czel, Gergely; Fuller, Jonathan D.; Wisnom, Michael R.; Canal, Luis P.; Gonzalez, Carlos D.; LLorca, Javier
Controlled synthesis of nanocrystalline glass-like carbon thin films with tuneable electrical and optical properties
Romero, P.; Postigo, P. A.; Baquedano, E.; Martinez, J.; Bosca, A.; Guzman de Villoria, R.
Orientation dependence of indentation behavior in Al-SiC nanolaminate composites
Mayer, C.; Yang, L. W.; Singh, S. S.; Xie, H.; Shen, Y. -L.; Llorca, J.; Molina-Aldareguia, J.; Chawla, N.
EBSD-Assisted Slip Trace Analysis During In Situ SEM Mechanical Testing: Application to Unravel Grain Size Effects on Plasticity of Pure Mg Polycrystals
Cepeda-Jimenez, C. M.; Molina-Aldareguia, J. M.; Perez-Prado, M. T.
On the robustness of an inverse optimization approach based on the Levenberg-Marquardt method for the mechanical behavior of polycrystals
Herrera-Solaz, V.; Segurado, J.; LLorca, J.
Experimental and phenomenological investigations of diffusion in Co-Al-W alloys
Chang, Hui; Xu, Guanglong; Lu, Xiao-Gang; Zhou, Lian; Ishida, Kiyohito; Cui, Yuwen
High Temperature Nanoindentation Response of RTM6 Epoxy Resin at Different Strain Rates
Frontini, P.; Lotfian, S.; Monclus, M. A.; Molina-Aldareguia, J. M.
Effect of Organo-Modified Nanosepiolite on Fire Behaviors and Mechanical Performance of Polypropylene Composites
Zhang, Junhao; de Juan, Sergio; Esteban-Cubillo, Antonio; Santaren, Julio; Wang, De-Yi
Understanding contribution of microstructure to fracture behaviour of sintered steels
Torralba, J. M.; Esteban, L.; Bernardo, E.; Campos, M.
Control of the Mechanical Asymmetry in an Extruded MN11 Alloy by Static Annealing
Hidalgo-Manrique, Paloma; Yi, S. B.; Bohlen, J.; Letzig, D.; Perez-Prado, M. T.
Computational thermodynamics, computational kinetics, and materials design
Lu, Xiao-Gang; Wang, Zhuo; Cui, Yuwen; Jin, Zhanpeng
A novel method for computing effective diffusivity: Application to helium implanted alpha-Fe thin films
Dunn, Aaron; Agudo-Merida, Laura; Martin-Bragado, Ignacio; McPhie, Mathieu; Cherkaoui, Mohammed; Capolungo, Laurent
Role of particles on microstructure and mechanical properties of the severely processed 7075 aluminium alloy
Hidalgo-Manrique, P.; Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Ruano, O. A.; Carreno, F.
Effect of high pressure torsion on the microstructure evolution of a gamma Ti-45Al-2Nb-2Mn-0.8 vol% TiB2 alloy
Srinivasarao, B.; Zhilyaev, A. P.; Munoz-Moreno, R.; Perez-Prado, M. T.
Comprehensive modeling of solid phase epitaxial growth using Lattice Kinetic Monte Carlo
Martin-Bragado, Ignacio
Effects of internal pore pressure on closed-cell elastomeric foams
Lopez-Pamies, Oscar; Ponte Castaneda, Pedro; Idiart, Martin I.
Influence of Plasma Surface Treatments on Kink Band Formation in PBO Fibers During Compression
Lorenzo-Villafranca, Eduardo; Tamargo-Martinez, Katia; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; Martinez-Alonso, Amelia; Tascon, Juan M. D.; Gracia, Mercedes; Llorca, Javier
Quasi-atomistic modeling of the microstructure evolution in binary alloys and its application to the FeCr case
Dopico, Ignacio; Castrillo, Pedro; Martin-Bragado, Ignacio
Study and Suppression of the Microstructural Anisotropy Generated During the Consolidation of a Carbonyl Iron Powder by Field-Assisted Hot Pressing
Garcia-Junceda, Andrea; Acebo, Laura; Manuel Torralba, Jose
Non-empirical phase equilibria in the Cr-Mo system: A combination of first-principles calculations, cluster expansion and Monte Carlo simulations
Chen, Wenzhou; Xu, Guanglong; Martin-Bragado, Ignacio; Cui, Yuwen
Evolution of dislocation loops in iron under irradiation: The impact of carbon
Terentyev, D.; Martin-Bragado, I.
Assessment of homogeneity of the shear-strain pattern in Al-7 wt%Si casting alloy processed by high-pressure torsion
Cepeda-Jimenez, C. M.; Orozco-Caballero, A.; Garcia-Infanta, J. M.; Zhilyaev, A. P.; Ruano, O. A.; Carreno, F.
Properties of AZ91 alloy produced by spark plasma sintering and extrusion
Straffelini, G.; Da Costa, L. Dione; Menapace, C.; Zanella, C.; Torralba, J. M.
Effect of ion flux on helium retention in helium-irradiated tungsten
Rivera, A.; Valles, G.; Caturla, M. J.; Martin-Bragado, I.
Shock attenuation of PMMA sandwich panels filled with soda-lime glass beads: A fluid-structure interaction continuum model simulation
Christou, George A.; Young, Laurence R.; Goel, Rahul; Vechart, Andrew P.; Jerusalem, Antoine
Process Modeling of Chemical and Stress Effects in SiGe
Zographos, Nikolas; Zechner, Christoph; Castrillo, Pedro; Martin-Bragado, Ignacio
Characterization of antiphase domains on GaAs grown on Ge substrates by conductive atomic force microscopy for photovoltaic applications
Galiana, B.; Rey-Stolle, I.; Beinik, I.; Algora, C.; Teichert, C.; Molina-Aldareguia, J. M.; Tejedor, P.
Large area photoelectrodes based on hybrids of CNT fibres and ALD-grown TiO2
Moya, A.; Kemnade, N.; Osorio, M. R.; Cherevan, A.; Granados, D.; Eder, D.; Vilatela, J. J.
Interfacial growth of MOF-derived layered double hydroxide nanosheets on graphene slab towards fabrication of multifunctional epoxy nanocomposites
Pan, Ye-Tang; Wan, Jintao; Zhao, Xuanliang; Li, Cheng; Wang, De-Yi
Nano-architectured mesoporous silica decorated with ultrafine Co3O4 toward an efficient way to delaying ignition and improving fire retardancy of polystyrene
Li, Zhi; Wang, De-Yi
Modeling cyclic deformation of inconel 718 superalloy by means of crystal plasticity and computational homogenization
Cruzado, A.; LLorca, J.; Segurado, J.
Effect of nitrogen and oxygen doped carbon nanotubes on flammability of epoxy nanocomposites
Shabestari, Marjan E.; Kalali, Ehsan N.; Gonzalez, Viviana Jehova; Wang, De-Yi; Fernandez-Blazquez, Juan P.; Baselga, Juan; Martin, Olga
Natural halloysite nanotube based functionalized nanohybrid assembled via phosphorus-containing slow release method: A highly efficient way to impart flame retardancy to polylactide
Li, Zhi; Fernandez Exposito, Daniel; Jimenez Gonzalez, Alejandro; Wang, De-Yi
Interfacial charge transfer in functionalized multi-walled carbon nanotube@TiO2 nanofibres
Saha, Avishek; Moya, Alicia; Kahnt, Axel; Iglesias, Daniel; Marchesan, Silvia; Wannemacher, Reinhold; Prato, Maurizio; Vilatela, Juan J.; Guldi, Dirk M.
Effect of alpha morphology on the diffusional beta <-> alpha transformation in Ti-55531 during continuous heating: Dissection by dilatometer test, microstructure observation and calculation
Chen, Fu-Wen; Xu, Guanglong; Zhang, Xiao-Yong; Zhou, Ke-Chao; Cui, Yuwen
Effect of solution heat treatment on microstructure and damage accumulation in cast Al-Cu alloys
Gutierrez, R. Fernandez; Sket, F.; Maire, E.; Wilde, F.; Boller, E.; Requena, G.
Flame retardancy and thermal degradation properties of cotton/alginate fabric
Liu, Yun; Zhao, Jin-Chao; Zhang, Chuan-Jie; Cui, Li; Guo, Yi; Zhu, Ping; Zhang, Hao; Zheng, Zhi-Wei; wang, De-Yi
Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing
Munoz-Moreno, R.; Ruiz-Navas, E. M.; Boehlert, C. J.; Llorca, J.; Torralba, J. M.; Perez-Prado, M. T.
Thermomechanical relaxation and different water states in cottonseed protein derived bioplastics
Yue, H. -B.; Fernandez-Blazquez, J. P.; Shuttleworth, P. S.; Cui, Y. -D.; Ellis, G.
Effect of the particle size and solids volume fraction on the thermal degradation behaviour of Invar 36 feedstocks
Hidalgo, J.; Fernandez-Blazquez, J. P.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
Surface phenomena during the early stages of sintering in steels modified with Fe-Mn-Si-C master alloys
Oro, Raquel; Campos, Monica; Hryha, Eduard; Manuel Torralba, Jose; Nyborg, Lars
Damage resistance and damage tolerance of dispersed CFRP laminates: The bending stiffness effect
Sebaey, T. A.; Gonzalez, E. V.; Lopes, C. S.; Blanco, N.; Costa, J.
About application of three dimensional analyses of fracture surfaces in fracture study on nanostructured titanium
Sabirov, I.; Valiev, R. Z.; Pippan, R.
Dielectric elastomer composites: small-deformation theory and applications
Siboni, Morteza Hakimi; Ponte Castaneda, Pedro
Elevated temperature deformation of Zr to large strains
Kassner, M. E.; Perez Prado, M. T.; Hayes, T. A.; Jiang, L.; Barrabes, S. R.; Lee, I. F.
Thermal stability and degradation kinetics of feedstocks for powder injection moulding – A new way to determine optimal solid loading?
Hidalgo, J.; Jimenez-Morales, A.; Torralba, J. M.
Phase field modeling of isothermal beta -> omega phase transformation in the Zr-Nb alloys
Tang, Bin; Cui, Y. -W.; Kou, Hongchao; Chang, Hui; Li, Jinshan; Zhou, Lian
In Situ Observations of the Deformation Behavior and Fracture Mechanisms of Ti-45Al-2Nb-2Mn+0.8 vol pct TiB2
Munoz-Moreno, Rocio; Boehlert, Carl J.; Teresa Perez-Prado, M.; Ruiz-Navas, Elisa M.; Llorca, Javier
Effect of Austempering Conditions on the Microstructure and Tensile Properties of Low Alloyed Sintered Steel
Campos, M.; Sicre-Artalejo, J.; Munoz, J. J.; Torralba, J. M.
Dislocation dynamics in non-convex domains using finite elements with embedded discontinuities
Romero, Ignacio; Segurado, Javier; LLorca, Javier
Covalent assembly of MCM-41 nanospheres on graphene oxide for improving fire retardancy and mechanical property of epoxy resin
Li, Zhi; Jimenez Gonzalez, Alejandro; Babu Heeralal, Vignesh; Wang, De-Yi
Role of the Bridging Group in Bis-Pyridyl Ligands: Enhancing Both the Photo- and Electroluminescent Features of Cationic (IPr) Cu-I Complexes
Elie, Margaux; Weber, Michael D.; Di Meo, Florent; Sguerra, Fabien; Lohier, Jean-Francois; Pansu, Robert B.; Renaud, Jean-Luc; Hamel, Matthieu; Linares, Mathieu; Costa, Ruben D.; Gaillard, Sylvain
Effect of nanoscale thick lamellae on the micromechanical response of a TiAl alloy
Palomares-Garcia, A. J.; Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.
Functional organoclay with high thermal stability and its synergistic effect on intumescent flame retardant polypropylene
Xiao, Dan; Li, Zhi; Zhao, Xiaomin; Gohs, Uwe; Wagenknecht, Udo; Voit, Brigitte; Wang, De-Yi
Sol-gel temperature dependent ductile-to-brittle transition of aluminosilicate fiber reinforced silica matrix composite
Yang, L. W.; Wang, J. Y.; Liu, H. T.; Jiang, R.; Cheng, H. F.
Interfacial engineering of renewable metal organic framework derived honeycomb-like nanoporous aluminum hydroxide with tunable porosity
Pan, Ye-Tang; Zhang, Lu; Zhao, Xiaomin; Wang, De-Yi
Austenite formation in 0.2% C and 0.45% C steels under conventional and ultrafast heating
Castro Cerda, F. M.; Sabirov, I.; Goulas, C.; Sietsma, J.; Monsalve, A.; Petrov, R. H.
Water soluble Invar 36 feedstock development for mu PIM
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
