LLorca, J.
Menú
Compositional dependence of serrated flow in nickel binary solid solutions during high-temperature microindentation
Gan, Bin; Tin, Sammy
Ultra-fine grained Al-Mg alloys with superior strength via physical simulation
Sabirov, I.; Enikeev, N.; Kazykhanov, V.; Valiev, R.; Murashkin, M.
INFLUENCE OF THE FIBER ALIGNMENT IN THE BALLISTIC PERFORMANCE OF DYNEEMA NON-WOVEN FABRICS
Martinez-Hergueta, Francisca; Galvez, Francisco; Gonzalez, Carlos
Atomistic modelling and simulation of arsenic diffusion including mobile arsenic clusters
Martin-Bragado, Ignacio; Zographos, Nikolas; Castrillo, Pedro
Effect of solidification parameters on the secondary dendrite arm spacing in MAR M-247 superalloy determined by a novel approach
Milenkovic, S.; Rahimian, M.; Sabirov, I.; Maestro, L.
Low temperature junction formation by Solid Phase Epitaxy on thin film devices: atomistic modeling and experimental achievements
Sklenard, B.; Batude, P.; Pasini, L.; Fenouillet-Beranger, C.; Previtali, B.; Casse, M.; Brunet, L.; Rivallin, P.; Barbe, J-C.; Tavernier, C.; Cristoloveanu, S.; Vinet, M.; Martin-Bragado, I.
International Workshop on Materials Design Process: Thermodynamics, Kinetics and Microstructure Control Foreword
Cui, Yuwen; Torralba, Jose M.; Lu, Xiao-Gang
Processing-Microstructure-Property Relationships & Deformation Mechanisms of Magnesium Alloys Foreword
Perez-Prado, M. T.; LLorca, J.; Boehlert, C. J.
Untitled
Danninger, H.; Torralba, J. M.
Downsizing of single crystalline high aspect ratio tungsten nanowires
Milenkovic, Srdjan; Drensler, Stefanie; Hassel, Achim Walter
Oxidation behavior and thermal stability of a NiAlV eutectic alloy
Milenkovic, Srdjan; Caram, Rubens
Pressed and sintered AISI 4140 PM low alloy steel from gas atomised powders
Navarro, G.; Jabbari Taleghani, M. A.; Torralba, J. M.
Evolution of texture and microstructure of AZ31 Mg alloy sheet at high strain rates
Ulacia, I.; Dudamell, N. V.; Esnaola, J. A.; Yi, S. B.; Perez-Prado, M. T.; Galvez, F.; Letzig, D.; Hurtado, I.
Modeling and Optimization of Solar Cells
Moroz, Victor; Huang, Joanne; Letay, Gergoe; Martin-Bragado, Ignacio
TENSILE AND CREEP DEFORMATION MECHANISMS IN ROLLED AZ31
Chen, Z.; Boehlert, C.; Gutierrez-Urrutia, I.; Llorca, J.; Perez-Prado, M. T.
A special issue of Comptes Rendus Mecanique in honor of Andre Zaoui Preface
Bornert, M.; Brenner, R.; Castelnau, O.; Ponte Castaneda, P.; Suquet, P.
Depth sensing indentation of organic-inorganic hybrid coatings deposited onto a polymeric substrate
Fasce, L. A.; Seltzer, R.; Frontini, P. M.
Comment on Influence of the Lode parameter and the stress triaxiality on the failure of elasto-plastic porous materials by K. Danas and P. Ponte Castaneda Response
Danas, Kostas; Ponte Castaneda, Pedro
On the Controversy About the Presence of Grain Boundary Sliding in Mg AZ31
Boehlert, Carl; Chen, Zhe; Gutierrez-Urrutia, Ivan; Llorca, Javier; Perez-Prado, Maria Teresa
Towards accurate porosity descriptors based on guest-host interactions
Paik, Dooam; Haranczyk, Maciej; Kim, Jihan
Preparation and Properties of a Main-Chain Smectic Liquid Crystalline Elastomer with Shape-Memory Ability
Martinez-Gomez, Aranzazu; Fernandez-Blazquez, Juan P.; Bello, Antonio; Perez, Ernesto
Beneficial effect of the mechanical bond on carbon nanotube polymer fillers
Lopez, Alejandro; Moffa, Maria; Bernal, Mar; De Juan, Alberto; Fernandez-Blazquez, Juan P.; Vilatela, Juan; Pisignano, Dario; Perez, Emilio
A stabilized meshless method for the solution of the lagrangian equations of newtonian fluids
Urrecha, M.; Romero, I.
Computational study of atomic mobility in hcp Mg-Al-Zn ternary alloys
Wang, Jingya; Li, Na; Wang, Chuanyun; Ignacio Beltran, Juan; LLorca, Javier; Cui, Yuwen
Symposium on New Steels for Applications Under Extreme Conditions Foreword
Garcia-Junceda, Andrea; Santofimia, Maria Jesus
A distributed-memory parallel lattice Kinetic Monte Carlo algorithm for crystal growth applied to barite (001) face
Abujas-Pereira, Jeronimo; Martin-Bragado, Ignacio; Pina, Carlos M.; Pizarro, Joaquin; Galindo, Pedro L.
On the Role of Alloy Composition and Sintering Parameters in the Bimodal Grain Size Distribution and Mechanical Properties of ODS Ferritic Steels
Garcia-Junceda, Andrea; Campos, Monica; Garcia-Rodriguez, Nerea; Manuel Torralba, Jose
CompTest 2015-Composites testing and model identification international conference, 8-10 April 2015 in Madrid, Spain
Gonzalez, Carlos; Lopes, Claudio; LLorca, Javier; Wisnom, Michael R.; Pierron, Fabrice
Editorial
Petrov, R.; Sabirov, I.
Preface: special issue on computational micromechanics of materials
Segurado, Javier; Sadowski, Tomasz; LLorca, Javier; Schmauder, Siegfried
Multiscale modeling of the small punch test in nanostructured Ti
Ridruejo, Alvaro; Segurado, Javier; Cristina Moreno-Valle, Eva; Sabirov, Ilchat; LLorca, Javier
Enhanced ductility of ultra-fine grained metallic materials
Sabirov, I.
Effect of Hydrostatic Pressure on the 3D Porosity Distribution and Mechanical Behavior of a High Pressure Die Cast Mg AZ91 Alloy
Sket, Federico; Fernandez, Ana; Jerusalem, Antoine; Molina-Aldareguia, Jon M.; Teresa Perez-Prado, Maria
NEW FINDINGS ON THE WETTABILITY AND SPREADING OF COPPER ON IRON-BASE SUBSTRATES
Bernardo, Elena; de Oro, Raquel; Campos, Monica; Torralba, Jose M.
Investigation of the Deformation Activation Volume of an Ultrafinegrained Ti50Ni50 Alloy
Gunderov, D. V.; Churakova, A. A.; Lukianov, A. V.; Prokofiev, E. A.; Prokoshkin, S. D.; Kreizberg, A. Yu.; Raab, G. I.; Sabirov, I. N.
High Frequency Dissipative Integration Schemes for Linear and Nonlinear Elastodynamics
Romero, Ignacio
On the use of a localized STRASS technique to obtain highly tensile strained Si regions in advanced FDSOI CMOS devices
Bonnevialle, A.; Reboh, S.; Le Royer, C.; Morand, Y.; Hartmann, J. -M.; Rouchon, D.; Pedini, J. -M.; Tabone, C.; Rambal, N.; Payet, A.; Plantier, C.; Boeuf, F.; Haond, M.; Claverie, A.; Vinet, M.
Tribo-Mechanical Properties of Hard Hydrogen-Free Diamond-Like Carbon Coatings Prepared by Magnetron Sputtering
Fernandez-Martinez, Ivan; Antonio Santiago, Jose; Bellido-Gonzalez, Victor; Monclus, Miguel; Molina, Jon; Gonzalez-Arrabal, Raquel; Papa, Frank; Wennberg, Ambiorn
Lattice kinetic Monte Carlo simulation of epitaxial growth of silicon thin films in H-2/SiH4 chemical vapor deposition systems
Pablo Balbuena, Juan; Martin-Bragado, Ignacio
Formulation and numerical solution of non-smooth elasto-visco-plasticity models
del Pozo, D.; Romero, I.
Prediction of Stiffness of Reused Carbon Fiber/Epoxy Composite Oriented Strand Board Using Finite Element Methods
Lin, B. C.; Li, X.; Jain, Atul; Wu, M-S; Mier, R.; Herraez, M.; Gonzalez, C.; LLorca, J.; Nutt, S. R.
Quantum Dots, Fluorescent Proteins Vie for Supremacy
Costa, Ruben D.
Structure-Property Relationships of Nanocomposites Based on Polylactide and Layered Double Hydroxides – Comparison of MgAl and NiAl LDH as Nanofiller
Leng, Jing; Kang, Nianjun; Wang, De-Yi; Falkenhagen, Jana; Thuenemann, Andreas F.; Schoenhals, Andreas
A generalization of Castigliano’s theorems for structures with eigenstrains
Romero, I.
Effect of Cellulose Nanocrystals on Fire, Thermal and Mechanical Behavior of N,N ‘-Diallyl-phenylphosphoricdiamide Modified Poly(lactic acid)
Yang, Weijun; Zhao, Xiaomin; Fortunati, Elena; Dominici, Franco; Kenny, Jose M.; Puglia, Debora; Wang, De-Yi
Thermodynamic mechanism of the intermixing of multilayered structures in the SiOx/SiO2 superlattices with nanometer thick layers
Sarikov, Andrey; Zhigunov, Denis
Mesoporous metal oxide/pyrophosphate hybrid originated from reutilization of water treatment resin as a novel fire hazard suppressant
Pan, Ye-Tang; Castillo-Rodriguez, Miguel; Wang, De-Yi
Ballistic performance of hybrid nonwoven/woven polyethylene fabric shields
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; LLorca, J.
Ring-Opening Copolymerization of Mixed Cyclic Monomers: A Facile, Versatile and Structure-Controllable Approach to Preparing Poly(methylphenylsiloxane) with Enhanced Thermal Stability
Li, Cheng; Zhang, Deqi; Wu, Linbo; Fan, Hong; Wang, Deyi; Li, Bo-Geng
A new approach for the solution of the neighborhood problem in meshfree methods
Tapia-Fernandez, Santiago; Romero, Ignacio; Garcia-Beltran, Angel
Multiscale Characterization of Nanoengineered Fiber-Reinforced Composites: Effect of Carbon Nanotubes on the Out-of-Plane Mechanical Behavior
Medina, Carlos; Fernandez, Eduardo; Salas, Alexis; Naya, Fernando; Molina-Aldereguia, Jon; Melendrez, Manuel F.; Flores, Paulo
RETRACTION: Atomistic simulation of damage accumulation and amorphization in Ge (Retraction of Vol 117, art no 055703, 2015)
Gomez-Selles, Jose L.; Claverie, Alain; Sklenard, Benoit; Benistant, Francis; Martin-Bragado, Ignacio
Influence of cerebral blood vessel movements on the position of perivascular synapses
Urrecha, Miguel; Romero, Ignacio; DeFelipe, Javier; Merchan-Perez, Angel
Kinetic Monte Carlo simulation of phase-precipitation versus instability behavior in short period FeCr superlattices
Rodriguez-Martinez, F. J.; Castejon-Mochon, J. F.; Castrillo, P.; Berenguer-Vidal, R.; Dopico, I.; Martin-Bragado, I.
MUESLI – a Material UnivErSal LIbrary
Portillo, David; del Pozo, Daniel; Rodriguez-Galan, Daniel; Segurado, Javier; Romero, Ignacio
Compositional screening of Zr-Nb-Mo alloys with CALPHAD-type model for promising bio-medical implants
Liang, J. S.; Liu, L. B.; Xu, G. L.; Wang, X.; Zhang, L. G.; Shi, X.; Tao, X. M.
{110}-Terminated Square-Shaped Gold Nanoplates and Their Electrochemical Surface Reactivity
Chen, Ying; Milenkovic, Srdjan; Hassel, Achim Walter
Large-Area Schottky Junctions between ZnO and Carbon Nanotube Fibres
Monreal-Bernal, Alfonso; Vilatela, Juan J.
Demonstration of transmission high energy electron microscopy
Merrill, F. E.; Goett, J.; Gibbs, J. W.; Imhoff, S. D.; Mariam, F. G.; Morris, C. L.; Neukirch, L. P.; Perry, J.; Poulson, D.; Simpson, R.; Volegov, P. L.; Walstrom, P. L.; Wilde, C. H.; Hast, C.; Jobe, K.; Smith, T.; Wienands, U.; Clarke, A. J.; Tourret, D.
High-temperature conduction behavior of carbon nanotube fiber from 25 degrees C to 1100 degrees C
Zhang, Xiaoshan; Yang, Lingwei; Liu, Haitao
New Materials and Approaches for Advanced Optoelectronics
Coto, Pedro B.; Costa, Ruben D.
Insightful investigation of smoke suppression behavior and mechanism of polystyrene with ferrocene: An important role of intermediate smoke
Li, Zhi; Fernandez Exposito, Daniel; Jimenez Gonzalez, Alejandro; Wang, De-Yi
On the quest for the strongest materials
LLorca, Javier
Flexural response of basalt textile reinforced concrete with pre-tension and short fibers under low-velocity impact loads
Liu, Sai; Zhu, Deju; Li, Gaosheng; Yao, Yiming; Ou, Yunfu; Shi, Caijun; Du, Yunxing
Effect of solutes on the rate sensitivity in Ti-xAl-yMo-zV and Ti-xAl-yMo-zCr beta-Ti alloys
Wang, C.; Li, N.; Cui, Y.; Perez-Prado, M. T.
Enabling high resolution strain mapping in zirconium alloys
Lunt, D.; Orozco-Caballero, A.; Thomas, R.; Honniball, P.; Frankel, P.; Preuss, M.; da Fonseca, J. Quinta
Construction of chelation structure between Ca2+ and starch via reactive extrusion for improving the performances of thermoplastic starch
Zhang, Shuidong; Lin, Zesheng; Jiang, Guo; Wang, Junsheng; Wang, De-Yi
Mechanical and Electrical Properties of Direct Spun Carbon Nanotube Fibers Exposed to Ultrahigh Temperatures in Vacuum
Zhang, Xiao-Shan; Yang, Ling-Wei; Liu, Hai-Tao; Zu, Mei
Development of a Cr-Based Hard Composite Processed by Spark Plasma Sintering
Garcia-Junceda, A.; Saez, I.; Deng, X. X.; Torralba, J. M.
Structural design, preparation and characterization of light, isotropic and robust statically determined organic frameworks as reusable adsorbents
Yue, H-B.; Guo, J. W.; Fu, S. Q.; Li, X.; Wen, W. Q.; Jiang, W. Z.; Tong, R.; Haranczyk, M.
The effect of nylon nanofibers on the dynamic behaviour and the delamination resistance of GFRP composites
Garcia, Cristobal; Trendafilova, Irina; Zucchelli, Andrea; Contreras, Justin
Processing of a new high entropy alloy: AlCrFeMoNiTi
Prieto, Estela; Calderon, Raquel De Oro; Konegger, Thomas; Gordo, Elena; Gierl-Mayer, Christian; Sheikh, Saad; Guo, Sheng; Danninger, Herbert; Milenkovic, Srdjan; Alvaredo, Paula
Maximizing Volumetric Removal Capacity in Capacitive Deionization by Adjusting Electrode Thickness and Charging Mode
Santos, Cleis; Lado, Julio J.; Garcia-Quismondo, Enrique; Soria, Jorge; Palma, Jesus; Anderson, Marc A.
Effect of stereocomplex crystal and flexible segments on the crystallization and tensile behavior of poly(L-lactide)
Li, Xiaolu; Zhang, Xiuqin; Liu, Guoming; Yang, Zhongkai; Yang, Bo; Qi, Yue; Wang, Rui; Wang, De-Yi
Spherical cobalt/cobalt oxide – Carbon composite anodes for enhanced lithium-ion storage
Patrinoiu, Greta; Etacheri, Vinodkumar; Somacescu, Simona; Teodorescu, Valentin S.; Birjega, Ruxandra; Culita, Dana C.; Hong, Chulgi Nathan; Calderon-Moreno, Jose Maria; Pol, Vilas G.; Carp, Oana
A numerical framework to analyze fracture in composite materials: From R-curves to homogenized softening laws
Herraez, M.; Gonzalez, C.; Lopes, C. S.
Peripheral Substitution of Tetraphenyl Porphyrins: Fine-Tuning Self-Assembly for Enhanced Electroluminescence
Charisiadis, Asterios; Bagaki, Anthi; Fresta, Elisa; Weber, Katharina T.; Charalambidis, Georgios; Stangel, Christina; Hatzidimitriou, Antonios G.; Angaridis, Panagiotis A.; Coutsolelos, Athanassios G.; Costa, Ruben D.
Hierarchical nanoporous silica doped with tin as novel multifunctional hybrid material to flexible poly (vinyl chloride) with greatly improved flame retardancy and mechanical properties (vol 295, pg 451, 2016)
Pan, Ye-Tang; Trempont, Cedric; Wang, De-Yi
Interfacial growth of MOF-derived layered double hydroxide nanosheets on graphene slab towards fabrication of multifunctional epoxy nanocomposites (vol 330, pg 1222, 2017)
Pan, Ye-Tang; Wan, Jintao; Zhao, Xuanliang; Li, Cheng; Wang, De-Yi
Enhanced microwave-absorbing property of precursor infiltration and pyrolysis derived SiCf/SiC composites at X band: Role of carbon-rich interphase
Yang, Lingwei; Liu, Haitao; Zu, Mei
Fitting electron density as a physically sound basis for the development of interatomic potentials of complex alloys
Ortiz-Roldan, Jose M.; Esteban-Manzanares, Gustavo; Lucarini, Sergio; Calero, Sofia; Segurado, Javier; Montero-Chacon, Francisco; Rabdel Ruiz-Salvador, A.; Hamad, Said
In Silico Design of 2D and 3D Covalent Organic Frameworks for Methane Storage Applications
Mercado, Rocio; Fu, Rueih-Sheng; Yakutovich, Aliaksandr V.; Talirz, Leopold; Haranczyk, Maciej; Smit, Berend
Self-powered pressure sensor based on the triboelectric effect and its analysis using dynamic mechanical analysis
Garcia, Cristobal; Trendafilova, Irina; Guzman de Villoria, Roberto; Sanchez del Rio, Jose
Crystal plasticity simulation of the effect of grain size on the fatigue behavior of polycrystalline Inconel 718
Cruzado, A.; Lucarini, S.; LLorca, J.; Segurado, J.
Crack propagation in TRIP assisted steels modeled by crystal plasticity and cohesive zone method
Dakshinamurthy, Manjunath; Ma, Anxin
Revealing the Effect of Local Connectivity of Rigid Phases during Deformation at High Temperature of Cast AlSi12Cu4Ni(2,3)Mg Alloys
Bugelnig, Katrin; Germann, Holger; Steffens, Thomas; Sket, Federico; Adrien, Jerome; Maire, Eric; Boller, Elodie; Requena, Guillermo
Novel Dihydroxy-Containing Ammonium Phosphate Based Poly(Lactic Acid): Synthesis, Characterization and Flame Retardancy
Jian, Rong-Kun; Xia, Long; Ai, Yuan-Fang; Wang, De-Yi
When Fluorescent Proteins Meet White Light-Emitting Diodes
Fernandez-Luna, Veronica; Coto, Pedro B.; Costa, Ruben D.
Composites of Proteins and 2D Nanomaterials
Demirel, Melik C.; Vural, Mert; Terrones, Mauricio
Research Progress on Micro-mechanical Property of Continuous Fiber-reinforced Ceramic Matrix Composites
Liu Hai-Tao; Yang Ling-Wei; Han Shuang
Experimental and computational study of diffusion mobilities for the bcc phase in the Fe-Al-(Si, Mn) systems
Zheng, Weisen; Wang, Jingya; He, Yanlin; Lu, Xiao-Gang; Li, Lin
Biobased Epoxy Resin with Low Electrical Permissivity and Flame Retardancy: From Environmental Friendly High-Throughput Synthesis to Properties
Li, Cheng; Fan, Hong; Aziz, Tariq; Bittencourt, Carla; Wu, Linbo; Wang, De-Yi; Dubois, Philippe
Impact response of basalt textile reinforced concrete subjected to different velocities and temperatures
Liu, Sai; Zhu, Deju; Ou, Yunfu; Yao, Yiming; Shi, Caijun
Coupling nonlinear beams and continua: Variational principles and finite element approximations
Romero, Ignacio
Bio-Materials for Light Management
Costa, Ruben D.
Synergistic Effect of Graphene Oxide and Mesoporous Structure on Flame Retardancy of Nature Rubber/IFR Composites
Wang, Na; Zhang, Miao; Kang, Ping; Zhang, Jing; Fang, Qinghong; Li, Wenda
White perovskite based lighting devices
Bidikoudi, M.; Fresta, E.; Costa, R. D.
Locally Induced Spin States on Graphene by Chemical Attachment of Boron Atoms
Li, Qing; Lin, Haiping; Lv, Ruitao; Terrones, Mauricio; Chi, Lifeng; Hofer, Werner A.; Pan, Minghu
Core-shell flame retardant/graphene oxide hybrid : a self-assembly strategy towards reducing fire hazard and improving toughness of polylactic acid
Jing, Jian; Zhang, Yan; Fang, Zheng-Ping; Wang, De-Yi
A carbon nanotube integrated microfluidic device for blood plasma extraction
Yeh, Yin-Ting; Lin, Zhong; Zheng, Si-Yang; Terrones, Mauricio
Assessment of atomic mobility for BCC Ti-Mn and Ti-Al-Mn alloys
Dong, Hao; Wang, Jingya; Xu, Guanglong; Zhou, Lian; Cui, Yuwen
Microstructure and compression strength of Co-based superalloys hardened by gamma ‘ and carbide precipitation
Carton-Cordero, Marta; Campos, Monica; Freund, Lisa P.; Kolb, Markus; Neumeier, Steffen; Goeken, Mathias; Torralba, Jose M.
Adhesion enhancement of DLC hard coatings by HiPIMS metal ion etching pretreatment
Santiago, J. A.; Fernandez-Martinez, I.; Wennberg, A.; Molina-Aldareguia, J. M.; Castillo-Rodriguez, M.; Rojas, T. C.; Sanchez-Lopez, J. C.; Gonzalez, M. U.; Garcia-Martin, J. M.; Li, H.; Bellido-Gonzalez, V.; Monclus, M. A.; Gonzalez-Arrabal, R.
Influence of phenylphosphonic amide on rheological, mechanical and flammable properties of carbon fiber/RTM6 composites
Zhao, Xiaomin; Zhang, Lu; Picon Alonso, Juan; Delgado, Sofia; Martinez-Miranda, M. R.; Wang, De-Yi
Structure mediation and ductility enhancement of poly(L-lactide) by random copolymer poly(D-lactide-co-epsilon-caprolactone)
Zhang, Xiuqin; Yin, Yongai; Song, Yan; Li, Xiaolu; Dong, Zhenfeng; Wang, Rui; Wang, De-Yi
Experimental Diffusion Research on BCC Ti-Al-Sn Ternary Alloys
Wu, Qiaojun; Wang, Jingya; Gu, Yuanyu; Guo, Yanhua; Xu, Guanglong; Cui, Yuwen
Thermodynamic Evaluation of the Co-Al-C System by Coupling Ab Initio Calculations and CALPHAD Approach
Zheng, Weisen; He, Shuang; Wang, Jingya; Mao, Huahai
Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
Yang, L. W.; Wang, C. Y.; Monclus, M. A.; Lu, L.; Molina-Aldareguia, J. M.; Llorca, J.
Computational micromechanics evaluation of the effect of fibre shape on the transverse strength of unidirectional composites: An approach to virtual materials design (vol 91, pg 484, 2016)
Herraez, M.; Gonzalez, C.; Lopes, C. S.; Guzman de Villoria, R.; LLorca, J.; Varela, T.; Sanchez, J.
A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
Rodriguez-Veiga, A.; Bellon, B.; Papadimitriou, I.; Esteban-Manzanares, G.; Sabirov, I.; LLorca, J.
Growth competition between columnar dendritic grains – Cellular automaton versus phase field modeling
Pineau, A.; Guillemot, G.; Tourret, D.; Karma, A.; Gandin, Ch. -A.
Hybrid titania-based multilayered photoelectrode for superior low temperature dye-sensitized solar cells
Serrano, Elena; Sepulveda, Angel; Lalinde, Elena; Berenguer, Jesus; Costa, Ruben; Garcia Martinez, Javier
Novel Ligand and Device Designs for Stable Light-Emitting Electrochemical Cells Based on Heteroleptic Copper(I) Complexes
Fresta, Elisa; Volpi, Giorgio; Milanesio, Marco; Garino, Claudio; Barolo, Claudia; Costa, Ruben D.
Light-emitting electrochemical cells based on inorganic metal halide perovskite nanocrystals
Aygueler, Meltem F.; Puscher, Bianka M. D.; Tong, Yu; Bein, Thomas; Urban, Alexander S.; Costa, Ruben D.; Docampo, Pablo
Effect of anisotropy on the mechanical properties of polyurethane foams: An experimental and numerical study
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
Discrete dislocation dynamics simulations of dislocation-theta ‘ precipitate interaction in Al-Cu alloys
Santos-Guemes, R.; Esteban-Manzanares, G.; Papadimitriou, I.; Segurado, J.; Capolungo, L.; LLorca, J.
Integrated Computational Materials Engineering in Solar Plants: The Virtual Materials Design Project
Montero-Chacon, Francisco; Chiumenti, Michele; Segurado, Javier; Doblare, Manuel
VIRTUAL MECHANICAL TESTING OF COMPOSITES: FROM MATERIALS TO COMPONENTS
LLorca, Javier; Gonzalez, Carlos
Tearing and Delaminating of a Polymer Laminate
Kao-Walter, S.; Walter, M.; Dasari, A.; Leon, A.
Quantification of hardening in Fe-Mn master alloys prepared by a mechanical alloying process via nanoindentation experiments
Sicre-Artalejo, Jose; Campos, Monica; Molina-Aldareguia, Jon M.; Torralba, Jose M.
Continuum modeling of {10(1)over-bar2} twinning in a Mg-3%Al-1%Zn rolled sheet
Jerusalem, A.; Fernandez, A.; Perez-Prado, M. T.
Influence of hygrothermal aging on the mechanical properties of Nylon 12 composites processed by selective laser sintering
Seltzer, R.; Segurado Escudero, J.; de la Escalera Cutillas, F. Martin
Modeling of Incommensurate omega Structure in the Zr-Nb Alloys
Tang, Bin; Cui, Y. -W.; Chang, Hui; Kou, Hongchao; Li, Jinshan; Zhou, Lian
Dynamic deformation of high pressure die-cast magnesium alloys
Dudamell, N. V.; Galvez, F.; Perez-Prado, M. T.
Dimensional consistency achieved in high-performance synchronizing hubs
Garcia, P.; Campos, M.; Torralba, J. M.
Lattice kinetic Monte Carlo modeling of germanium solid phase epitaxial growth
Gomez-Selles, J. L.; Darby, B. L.; Jones, K. S.; Martin-Bragado, I.
Mechanical behavior and microstructure evolution of a quenched and partitioned steel during drop weight impact and punch testing
Xia, Peikang; Sabirov, Ilchat; Molina-Aldareguia, Jon; Verleysen, Patricia; Petrov, Roumen
Interfacial engineering of layered double hydroxide toward epoxy resin with improved fire safety and mechanical property
Li, Zhi; Liu, Zhiqi; Dufosse, Francois; Yan, Luke; Wang, De-Yi
A novel oligomer containing DOPO and ferrocene groups: Synthesis, characterization, and its application in fire retardant epoxy resin
Wen, Yi; Cheng, Zhou; Li, Wenxiong; Li, Zhi; Liao, Duijun; Hu, Xiaoping; Pan, Ning; Wang, Deyi; Hull, T. Richard
Surface Chemistry Analysis of Carbon Nanotube Fibers by X-Ray Photoelectron Spectroscopy
Aleman, Belen; Vila, Maria; Vilatela, Juan J.
Emerging Materials in Heterogeneous Electrocatalysis Involving Oxygen for Energy Harvesting
Rana, Moumita; Mondal, Sanjit; Sahoo, Lipipuspa; Chatterjee, Kaustav; Karthik, Pitchiah E.; Gautam, Ujjal K.
Origin of Degradation in Si-Based All-Solid-State Li-Ion Microbatteries
Chen, Chunguang; Oudenhoven, Jos F. M.; Danilov, Dmitri L.; Vezhlev, Egor; Gao, Lu; Li, Na; Mulder, Fokko M.; Eichel, Ruediger-A.; Notten, Peter H. L.
The effect of manganese additions on the high temperature oxidation behaviour of the high-vanadium cast iron
Chen, Pinghu; Liu, Zhilin; Li, Ruiqing; Li, Xiaoqian
Transferrable polymeric carbon nitride/nitrogen-doped graphene films for solid state optoelectronics
Gan, Xin; Lv, Ruitao; Zhang, Tianyi; Zhang, Fu; Terrones, Mauricio; Kang, Feiyu
H2O2/UV layer-by-layer oxidation of multiwall carbon nanotubes: The onion effect and the control of the degree of surface crystallinity and diameter
Gonzalez, Viviana Jehova; Vega-Diaz, Sofia Magdalena; Morelos-Gomez, Aaron; Fujisawa, Kazunori; Endo, Morinobu; Cadiz, Olga Martin; Llido, Juan Baselga; Terrones, Mauricio
Two-pheromone Ant Colony Optimization to design dispersed laminates for aeronautical structural applications
Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Mayugo, J. A.; Costa, J.
Virtual fracture testing of composite materials and structures
LLorca, Javier; Cox, Brian N.
A 3D dislocation dynamics analysis of the size effect on the strength of [111] LiF micropillars at 300K and 600K
Chang, Hyung-Jun; Segurado, Javier; Molina-Aldareguia, Jon M.; Soler, Rafael; LLorca, Javier
Exploring phase stability, electronic and mechanical properties of Ce-Pb intermetallic compounds using first-principles calculations
Tao, Xiaoma; Wang, Ziru; Lan, Chunxiang; Xu, Guanglong; Ouyang, Yifang; Du, Yong
Time dependent modeling of single particle displacement damage in silicon devices
Tang, Du; Martin-Bragado, Ignacio; He, Chaohui; Zang, Hang; Xiong, Cen; Li, Yonghong; Guo, Daxi; Zhang, Peng; Zhang, Jinxin
Damage accumulation during cryogenic and room temperature implantations in strained SiGe alloys
Payet, Anthony; Luce, Flavia Piegas; Curfs, Caroline; Mathieu, Benoit; Sklenard, Benoit; Barbe, Jean-Charles; Batude, Perrine; Joblot, Sylvain; Tavernier, Clement; Colombeau, Benjamin; Guissi, Sofiene; Martin-Bragado, Ignacio; Gergaud, Patrice
Microstructure Evolution in Fe and Fe-Cr Alloys with OKMC Methods
Caturla, Maria J.; Aliaga, Maria J.; Martin-Bragado, Ignacio; Dopico, Ignacio; Malerba, Lorenzo; Hernandez-Mayoral, Mercedes
Hydrogen behavior in Al-Cr alloys: Synchrotron-based photoelectron microscopy of the rapidly solidified structure
Tashlykova-Bushkevich, Iya I.; Amati, Matteo; Aleman, Belen; Sezen, Hikmet; Gregoratti, Luca; Kiskinova, Maya
Bio-based carbonaceous composite materials from epoxidised linseed oil, bio-derived curing agent and starch with controllable functionality
Supanchaiyamat, N.; Shuttleworth, P. S.; Sikhom, C.; Chaengkham, S.; Yue, H-B.; Fernandez-Blazquez, J. P.; Budarin, V. L.; Hunt, A. J.
Response to Comment on ‘Thickness and temperature depending intermixing of SiOx/SiO2 and SiOxNy/SiO2 superlattices: Experimental observation and thermodynamic modeling’ [Appl. Phys. Lett. 109, 166101 (2016)]
Zhigunov, D. M.; Sarikov, A.; Chesnokov, Yu. M.; Vasiliev, A. L.; Zakharov, N.; Kashkarov, P. K.
Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining
Cepeda-Jimenez, C. M.; Castillo-Rodriguez, M.; Molina-Aldareguia, J. M.; Huang, Y.; Langdon, T. G.; Perez-Prado, M. T.
The Effect of a Semi-Industrial Masterbatch Process on the Carbon Nanotube Agglomerates and Its Influence in the Properties of Thermoplastic Carbon Nanotube Composites
Herrera-Ramirez, Luis C.; Castell, Pere; Castillo-Rodriguez, Miguel; Fernandez, Angel; Guzman de Villoria, Roberto
Numerical simulation of the ballistic response of needle-punched nonwoven fabrics
Martinez-Hergueta, F.; Ridruejo, A.; Gonzalez, C.; Llorca, J.
High-Temperature Micropillar Compression Creep Testing of Constituent Phases in Lead-Free Solder
Mayer, Carl R.; Lotfian, Saeid; Molina-Aldareguia, Jon; Chawla, Nikhilesh
Crystal Plasticity Finite Element Simulations for Single Phase Titanium Alloys: Effect of Polycrystalline Aggregate Features on the Mechanical Response
Tang Bin; Xie Shao; Liu Yi; Han Fengbo; Kou Hongchao; Li Jinshan
Enhanced Impact Energy Absorption Characteristics of Sandwich Composites through Tufting
Henao, Anamaria; Guzman de Villoria, Roberto; Cuartero, Jesus; Carrera, Marco; Picon, Juan; Miravete, Antonio
Deformation behaviour of a commercial pure titanium alloy during hot compression testing
Chao, Qi; Beladi, Hossein; Sabirov, Ilchat; Hodgson, Peter D.
A physical simulation study of the effect of thermal variations on the secondary dendrite arm spacing in a Ni-based superalloy
Rahimian, Mehdi; Milenkovic, Srdjan; Sabirov, Ilchat
Mechanical and functional properties of Invar alloy for mu-MIM
Hidalgo, J.; Jimenez-Morales, A.; Barriere, T.; Gelin, J. C.; Torralba, J. M.
Mechanical alloying and field assisted hot pressing of nanocrystalline B2-NiAl intermetallic compound
Varona-Caballero, A.; Milenkovic, S.; Jabbari-Taleghani, M. A.; Monge, M. A.
Study of the Synergistic Effect of Nanoporous Nickel Phosphates on Novel Intumescent Flame Retardant Polypropylene Composites
Nie, Shibin; Zhang, Chi; Peng, Chao; Wang, De-yi; Ding, Daowei; He, Qingliang
Effect of Q&P parameters on microstructure development and mechanical behaviour of Q&P steels
De Diego-Calderon, Irene; De Knijf, Dorien; Molina-Aldareguia, Jon M.; Sabirov, Ilchat; Fojer, Cecilia; Petrov, Roumen
Triboelectric nanogenerator as self-powered impact sensor
Garcia, Cristobal; Trendafilova, Irina; Guzman de Villoria, Roberto; Sanchez del Rio, Jose
Fracture behaviour of triaxial braided composites and its simulation using a multi-material shell modelling approach
Garcia-Carpintero, A.; van den Beuken, B. N. G.; Haldar, S.; Herraez, M.; Gonzalez, C.; Lopes, C. S.
Cobalt Nanoparticles Chemically Bonded to Porous Carbon Nanosheets: A Stable High-Capacity Anode for Fast-Charging Lithium-Ion Batteries
Etacheri, Vinodkumar; Hong, Chulgi Nathan; Tang, Jialiang; Pol, Vilas G.
Development of Duplex Stainless Steels by Field-Assisted Hot Pressing: Influence of the Particle Size and Morphology of the Powders on the Final Mechanical Properties
Garcia-Junceda, A.; Rinon, M.; Torralba, J. M.
Understanding the high temperature reversed yield asymmetry in a Mg-rare earth alloy by slip trace analysis
Cepeda-Jimenez, C. M.; Prado-Martinez, C.; Perez-Prado, M. T.
Energy storage in structural composites by introducing CNT fiber/polymer electrolyte interleaves
Senokos, Evgeny; Ou, Yunfu; Jose Torres, Juan; Sket, Federico; Gonzalez, Carlos; Marcilla, Rebeca; Vilatela, Juan J.
Enhanced Electro-Fenton Mineralization of Acid Orange 7 Using a Carbon Nanotube Fiber-Based Cathode
Thi Xuan Huong Le; Aieman, Beien; Vilatela, Juan J.; Bechelany, Mikhael; Cretin, Marc
Cutting Materials in Half: A Graph Theory Approach for Generating Crystal Surfaces and Its Prediction of 2D Zeolites
Witman, Matthew; Ling, Sanliang; Boyd, Peter; Barthel, Senja; Haranczyk, Maciej; Slater, Ben; Smit, Berend
Effect of phytic acid-modified layered double hydroxide on flammability and mechanical properties of intumescent flame retardant polypropylene system
Kalali, Ehsan Naderi; Montes, Anabel; Wang, Xin; Zhang, Lu; Shabestari, Marjan E.; Li, Zhi; Wang, De-Yi
Porphyrins as Multifunctional Interconnects in Networks of ZnO Nanoparticles and their Application in Dye-Sensitized Solar Cells
Duering, Jasmin; Kunzmann, Andreas; Killian, Manuela S.; Costa, Ruben D.; Guldi, Dirk M.; Groehn, Franziska
Iodine-Pseudohalogen Ionic Liquid-Based Electrolytes for Quasi-Solid-State Dye-Sensitized Solar Cells
Lennert, Annkatrin; Sternberg, Michelle; Meyer, Karsten; Costa, Ruben D.; Guldi, Dirk M.
Review of Grain Refinement of Cast Metals Through Inoculation: Theories and Developments
Liu, Zhilin
Choosing the right nanoparticle size – designing novel ZnO electrode architectures for efficient dye-sensitized solar cells
Pfau, Markus W.; Kunzmann, Andreas; Segets, Doris; Peukert, Wolfgang; Wallace, Gordon G.; Officer, David L.; Clark, Tim; Costa, Ruben D.; Guldi, Dirk M.
Effect of tea saponin-based intumescent flame retardant on thermal stability, mechanical property and flame retardancy of natural rubber composites
Wang, Na; Hu, Lidong; Babu, Heeralal Vignesh; Zhang, Jing; Fang, Qinghong
Effect of SPD processing on mechanical behavior and dynamic strain aging of an Al-Mg alloy in various deformation modes and wide strain rate range
Valdes-Tabernero, M. A.; Sancho-Cadenas, R.; Sabirov, I.; Murashkin, M. Yu; Ovid'ko, I. A.; Galvez, F.
The effect of the pre-heating stage on the microstructure and texture of a cold rolled FeCMnAlSi steel under conventional and ultrafast heating
Castro Cerda, F. M.; Goulas, C.; Sabirov, I.; Kestens, L. A. I.; Petrov, R. H.
The effects of pre-deformation on the creep aging behavior and mechanical properties of Al-Li-S4 alloys
Hu, Libin; Zhan, Lihua; Liu, Zhilin; Shen, Rulin; Yang, Youliang; Ma, Ziyao; Liu, Ming; Liu, Jian; Yang, Yingge; Wang, Xun
Mapping of Diffusion and Nanohardness Properties of Fcc Co-Al-V Alloys Using Ternary Diffusion Couples
Wang, Chuanyun; Xu, Guanglong; Cui, Yuwen
A novel high symmetry interlocking micro-architecture design for polymer composites with improved mechanical properties
Haldar, Sandip; Sain, Trisha; Ghosh, Susanta
Energy-entropy-momentum integration schemes for general discrete non-smooth dissipative problems in thermomechanics
Portillo, D.; Garcia Orden, J. C.; Romero, I.
Invited paper: Kinetic diffusion multiple: A high-throughput approach to screening the composition-microstructure-micromechanical properties relationships
Mao, Shu; Wang, Chuanyun; Li, Na; Wang, Jingya; Chen, Yi; Xu, Guanglong; Guo, Yanhua; Cui, Yuwen
Interconnected metal oxide CNT fibre hybrid networks for current collector-free asymmetric capacitive deionization dagger
Santos, Cleis; Lado, Julio J.; Garcia-Quismondo, Enrique; Rodriguez, Ines, V; Hospital-Benito, Daniel; Palma, Jesus; Anderson, Marc A.; Vilatela, Juan J.
A multiscale methodology quantifying the sintering temperature-dependent mechanical properties of oxide matrix composites
Jiang, Ru; Yang, Lingwei; Liu, Haitao; Tan, Wei; Sun, Xun; Cheng, Haifeng; Mao, Weiguo
Enhanced strain rate sensitivity of Zr-based bulk metallic glasses subjected to high pressure torsion
Boltynjuk, E. V.; Gunderov, D. V.; Ubyivovk, E. V.; Monclus, M. A.; Yang, L. W.; Molina-Aldareguia, J. M.; Tyurin, A. I.; Kilmametov, A. R.; Churakova, A. A.; Churyumov, A. Yu.; Valiev, R. Z.
Synthesis and anhydrous proton conductivity of doped azole functional PGMA-hBN nano-flakes
Yusuf, Abdulmalik; Celik, Sevim Unugur; Bozkurt, Ayhan
Kinetic Diffusion Couple for Mapping Microstructural and Mechanical Data on Ti-Al-Mo Titanium Alloys
Chen, Yi; Kou, Hongchao; Cheng, Liang; Zhang, Yunlong; Yu, Yun; Lu, Yalin
Enhancements in mechanical and electrical properties of carbon nanotube films by SiC and C matrix bridging
Zhang, Xiaoshan; Yang, Lingwei; Liu, Haitao
Effect of Ultrafast Heating on the Properties of the Microconstituents in a Low-Carbon Steel
Valdes-Tabernero, M. A.; Vercruysse, F.; Sabirov, I.; Petrov, R. H.; Monclus, M. A.; Molina-Aldareguia, J. M.
Surrogate models of the influence of the microstructure on the mechanical properties of closed- and open-cell foams
Marvi-Mashhadi, M.; Lopes, C. S.; LLorca, J.
High-performance carrageenan film based on carrageenan intercalated layered double hydroxide with enhanced properties: Fire safety, thermal stability and barrier effect
Li, Zhi; Wang, Jiang; Fernandez Exposito, Daniel; Zhang, Jing; Fu, Can; Shi, Dean; Wang, De-Yi
Thermal-field effects on interface dynamics and microstructure selection during alloy directional solidification
Song, Y.; Tourret, D.; Mota, F. L.; Pereda, J.; Billia, B.; Bergeon, N.; Trivedi, R.; Karma, A.
Slip transfer across gamma-TiAl lamellae in tension
Jesus Palomares-Garcia, Alberto; Teresa Perez-Prado, Maria; Mikel Molina-Aldareguia, Jon
Effect of layer thickness on the mechanical behaviour of oxidation-strengthened Zr/Nb nanoscale multilayers
Monclus, M. A.; Callisti, M.; Polcar, T.; Yang, L. W.; Molina-Aldareguia, J. M.; LLorca, J.
Mechanical properties of aluminosilicate fiber heat-treated from 800 degrees C to 1400 degrees C: Effects of phase transition, grain growth and defects
Jiang, Ru; Liu, Haitao; Yang, Lingwei; Sun, Xun; Cheng, Haifeng
The role of interfacial properties on the intralaminar and interlaminar damage behaviour of unidirectional composite laminates: Experimental characterization and multiscale modelling
Tan, W.; Naya, F.; Yang, L.; Chang, T.; Falzon, B. G.; Zhan, L.; Molina-Aldareguia, J. M.; Gonzalez, C.; Llorca, J.
Role of lignin nanoparticles in UV resistance, thermal and mechanical performance of PMMA nanocomposites prepared by a combined free-radical graft polymerization/masterbatch procedure
Yang, Weijun; Rallini, Marco; Wang, De-Yi; Gao, Daqian; Dominici, Franco; Torre, Luigi; Kenny, Jose M.; Puglia, Debora
Rationalizing Fabrication and Design Toward Highly Efficient and Stable Blue Light-Emitting Electrochemical Cells Based on NHC Copper(I) Complexes
Weber, Michael D.; Fresta, Elisa; Elie, Margaux; Miehlich, Matthias E.; Renaud, Jean-Luc; Meyer, Karsten; Gaillard, Sylvain; Costa, Ruben D.
Hybrid Dye-Titania Nanoparticles for Superior Low-Temperature Dye-Sensitized Solar Cells
Kunzmann, Andreas; Valero, Silvia; Sepulveda, Angel E.; Rico-Santacruz, Marisa; Lalinde, Elena; Berenguer, Jesus R.; Garcia-Martinez, Javier; Guldi, Dirk M.; Serrano, Elena; Costa, Ruben D.
Tuning pentacene based dye-sensitized solar cells
Kunzmann, Andreas; Gruber, Marco; Casillas, Ruben; Tykwinski, Rik R.; Costa, Ruben D.; Guldi, Dirk M.
Improving charge injection and charge transport in CuO-based p-type DSSCs – a quick and simple precipitation method for small CuO nanoparticles
Langmar, Oliver; Ganivet, Carolina R.; Schol, Peter; Scharl, Tobias; de la Torre, Gema; Torres, Tomas; Costa, Ruben D.; Guldi, Dirk M.
Computational diffusion kinetics and its applications in study and design of rare metallic materials
Cui, Yuwen; Xu, Guanglong; Chen, Yi; Tang, Bin; Li, Jinshan; Zhou, Lian
Effect of processing conditions on microstructural features in Mn-Si sintered steels
Oro, Raquel; Hryha, Eduard; Campos, Monica; Torralba, Jose M.
