Publicaciones

    2011

  • Martinez, E.; Monasterio, P. R.; Marian, J. - Billion-atom synchronous parallel kinetic Monte Carlo simulations of critical 3D Ising systems. journal of computational physics 230, 1359-1369, 2011. DOI: 10.1016/j.jcp.2010.11.006
  • Molina-Aldareguia, Jon M.; Rodriguez, M.; Gonzalez, C.; LLorca, J. - An experimental and numerical study of the influence of local effects on the application of the fibre push-in test. philosophical magazine 91, 1293-1307, 2011. DOI: 10.1080/14786435.2010.480947
  • Srinivasarao, B.; Zhilyaev, A. P.; Perez-Prado, M. T. - Orientation dependency of the alpha to omega plus beta transformation in commercially pure zirconium by high-pressure torsion. scripta materialia 65, 241-244, 2011. DOI: 10.1016/j.scriptamat.2011.04.017
  • Sebaey, T. A.; Lopes, C. S.; Blanco, N.; Costa, J. - Ant Colony Optimization for dispersed laminated composite panels under biaxial loading. composite structures 94, 31-36, 2011. DOI: 10.1016/j.compstruct.2011.07.021
  • Milenkovic, Srdjan; Schneider, Andre; Frommeyer, Georg - Constitutional and microstructural investigation of the pseudobinary NiAl-W system. intermetallics 19, 342-349, 2011. DOI: 10.1016/j.intermet.2010.10.019
  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - Micromechanisms of deformation and fracture of polypropylene nonwoven fabrics. international journal of solids and structures 48, 153-162, 2011. DOI: 10.1016/j.ijsolstr.2010.09.013
  • Hernandez, S.; Sket, F.; Molina-Aldareguia, J. M.; Gonzalez, C.; LLorca, J. - Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites. composites science and technology 71, 1331-1341, 2011. DOI: 10.1016/j.compscitech.2011.05.002
  • Sabirov, I.; Perez-Prado, M. T.; Molina-Aldareguia, J. M.; Semenova, I. P.; Salimgareeva, G. Kh; Valiev, R. Z. - Anisotropy of mechanical properties in high-strength ultra-fine-grained pure Ti processed via a complex severe plastic deformation route. scripta materialia 64, 69-72, 2011. DOI: 10.1016/j.scriptamat.2010.09.006
  • Zhilyaev, A. P.; Sabirov, I.; Gonzalez-Doncel, G.; Molina-Aldareguia, J.; Srinivasarao, B.; Perez-Prado, M. T. - Effect of Nb additions on the microstructure, thermal stability and mechanical behavior of high pressure Zr phases under ambient conditions. materials science and engineering a-structural materials properties microstructure and processing 528, 3496-3505, 2011. DOI: 10.1016/j.msea.2011.01.062
  • Fernandez, Ana; Perez Prado, Maria Teresa; Wei, Yujie; Jerusalem, Antoine - Continuum modeling of the response of a Mg alloy AZ31 rolled sheet during uniaxial deformation. international journal of plasticity 27, 1739-1757, 2011. DOI: 10.1016/j.ijplas.2011.05.002
  • LLorca, J.; Gonzalez, C.; Molina-Aldareguia, J. M.; Segurado, J.; Seltzer, R.; Sket, F.; Rodriguez, M.; Sadaba, S.; Munoz, R.; Canal, L. P. - Multiscale Modeling of Composite Materials: a Roadmap Towards Virtual Testing. advanced materials 23, 5130-5147, 2011. DOI: 10.1002/adma.201101683
  • Dudamell, N. V.; Ulacia, I.; Galvez, F.; Yi, S.; Bohlen, J.; Letzig, D.; Hurtado, I.; Perez-Prado, M. T. - Twinning and grain subdivision during dynamic deformation of a Mg AZ31 sheet alloy at room temperature. acta materialia 59, 6949-6962, 2011. DOI: 10.1016/j.actamat.2011.07.047
  • 2010

  • Jerusalem, A.; Fernandez, A.; Perez-Prado, M. T. - Continuum modeling of {10(1)over-bar2} twinning in a Mg-3%Al-1%Zn rolled sheet. revista de metalurgia 46, 133-137, 2010. DOI: 10.3989/revmetalmadrid.16XIIPMS
  • Li, Weibang; Hu, Rui; Cui, Y. -W.; Zhong, Hong; Chang, Hui; Li, Jinshan; Zhou, Lian - Computational study of atomic mobility for the bcc phase of the U-Pu-Zr ternary system. journal of nuclear materials 407, 220-227, 2010. DOI: 10.1016/j.jnucmat.2010.10.035
  • Molina-Aldareguia, Jon M.; Reyes Elizalde, M. - Metal Matrix Composites reinforced with nano-size reinforcements. composites science and technology 70, 2227-2227, 2010. DOI: 10.1016/j.compscitech.2010.08.009
  • Molina-Aldareguia, J. M.; Perez-Prado, M. T.; Valiev, R. Z.; Semenova, I. P.; Sabirov, I. - HIGH STRENGTH ULTRA-FINE GRAINED TITANIUM PRODUCED VIA A NOVEL SPD PROCESSING ROUTE. international journal of material forming 3, 407-410, 2010. DOI: 10.1007/s12289-010-0793-1
  • Campos, M.; Sicre-Artalejo, J.; Munoz, J. J.; Torralba, J. M. - Effect of Austempering Conditions on the Microstructure and Tensile Properties of Low Alloyed Sintered Steel. metallurgical and materials transactions a-physical metallurgy and materials science 41A, 1847-1854, 2010. DOI: 10.1007/s11661-010-0212-8
  • Zhilyaev, Alexander P.; Sharafutdinov, Alfred V.; Teresa Perez-Prado, M. - Phase Transformations During High-Pressure Torsion of Pure Zr and of a Zr-2.5%Nb Alloy. advanced engineering materials 12, 754-757, 2010. DOI: 10.1002/adem.200900348
  • Tamayo-Ariztondo, J.; Cordoba, J. M.; Oden, M.; Molina-Aldareguia, J. M.; Elizalde, M. R. - Effect of heat treatment of carbon nanofibres on electroless copper deposition. composites science and technology 70, 2269-2275, 2010. DOI: 10.1016/j.compscitech.2010.07.015
  • Sabirov, I.; Kolednik, O. - Local and global measures of the fracture toughness of metal matrix composites. materials science and engineering a-structural materials properties microstructure and processing 527, 3100-3110, 2010. DOI: 10.1016/j.msea.2010.01.055
  • Perez-Prado, M. T.; Sharafutdinov, A.; Zhilyaev, A. P. - Thermal stability of pure bcc Zr fabricated by high pressure torsion. materials letters 64, 211-214, 2010. DOI: 10.1016/j.matlet.2009.10.049
  • Sabirov, I.; Perez-Prado, M. T.; Murashkin, M.; Molina-Aldareguia, J. M.; Bobruk, E. V.; Yunusova, N. F.; Valiev, R. Z. - APPLICATION OF EQUAL CHANNEL ANGULAR PRESSING WITH PARALLEL CHANNELS FOR GRAIN REFINEMENT IN ALUMINIUM ALLOYS AND ITS EFFECT ON DEFORMATION BEHAVIOR. international journal of material forming 3, 411-414, 2010. DOI: 10.1007/s12289-010-0794-0
  • Sket, F.; Dzieciol, K.; Borbely, A.; Kaysser-Pyzalla, A. R.; Maile, K.; Scheck, R. - Microtomographic investigation of damage in E911 steel after long term creep. materials science and engineering a-structural materials properties microstructure and processing 528, 103-111, 2010. DOI: 10.1016/j.msea.2010.07.029
  • Cai, Guipeng; Dasari, Aravind; Yu, Zhong-Zhen; Du, Xusheng; Dai, Shaocong; Mai, Yiu-Wing; Wang, Jiyang - Fire response of polyamide 6 with layered and fibrillar nanofillers. polymer degradation and stability 95, 845-851, 2010. DOI: 10.1016/j.polymdegradstab.2010.01.026
  • Zhilyaev, A. P.; Galvez, F.; Sharafutdinov, A.; Perez-Prado, M. T. - Influence of the high pressure torsion die geometry on the allotropic phase transformations in pure Zr. materials science and engineering a-structural materials properties microstructure and processing 527, 3918-3928, 2010. DOI: 10.1016/j.msea.2010.02.066
  • Marcos-Gomez, D.; Ching-Lloyd, J.; Elizalde, M. R.; Clegg, W. J.; Molina-Aldareguia, J. M. - Predicting the thermal conductivity of composite materials with imperfect interfaces. composites science and technology 70, 2276-2283, 2010. DOI: 10.1016/j.compscitech.2010.05.027
  • Sabirov, I.; Valiev, R. Z.; Semenova, I. P.; Pippan, R. - Effect of Equal Channel Angular Pressing on the Fracture Behavior of Commercially Pure Titanium. metallurgical and materials transactions a-physical metallurgy and materials science 41A, 727-733, 2010. DOI: 10.1007/s11661-009-0111-z
  • Multigner, M.; Ferreira-Barragans, S.; Frutos, E.; Jaafar, M.; Ibanez, J.; Marin, P.; Perez-Prado, M. T.; Gonzalez-Doncel, G.; Asenjo, A.; Gonzalez-Carrasco, J. L. - Superficial severe plastic deformation of 316 LVM stainless steel through grit blasting: Effects on its microstructure and subsurface mechanical properties. surface & coatings technology 205, 1830-1837, 2010. DOI: 10.1016/j.surfcoat.2010.07.126
  • Aguirre, M. V.; Martin, A.; Pastor, J. Y.; Llorca, J.; Monge, M. A.; Pareja, R. - Mechanical properties of Y2O3-doped W-Ti alloys. journal of nuclear materials 404, 203-209, 2010. DOI: 10.1016/j.jnucmat.2010.07.016
  • Ridruejo, Alvaro; Gonzalez, Carlos; LLorca, Javier - Damage micromechanisms and notch sensitivity of glass-fiber non-woven felts: An experimental and numerical study. journal of the mechanics and physics of solids 58, 1628-1645, 2010. DOI: 10.1016/j.jmps.2010.07.005
  • Enfedaque, A.; Molina-Aldareguia, J. M.; Galvez, F.; Gonzalez, C.; Llorca, J. - Effect of Glass Fiber Hybridization on the Behavior Under Impact of Woven Carbon Fiber/Epoxy Laminates. journal of composite materials 44, 3051-3068, 2010. DOI: 10.1177/0021998310369602
  • Dasari, Aravind; Zhang, Qing-Xin; Yu, Zhong-Zhen; Mai, Yiu-Wing - Toughening Polypropylene and Its Nanocomposites with Submicrometer Voids. macromolecules 43, 5734-5739, 2010. DOI: 10.1021/ma100633y
  • Ulacia, I.; Dudamell, N. V.; Galvez, F.; Yi, S.; Perez-Prado, M. T.; Hurtado, I. - Mechanical behavior and microstructural evolution of a Mg AZ31 sheet at dynamic strain rates. acta materialia 58, 2988-2998, 2010. DOI: 10.1016/j.actamat.2010.01.029
  • Totry, Essam; Molina-Aldareguia, Jon M.; Gonzalez, Carlos; LLorca, Javier - Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites. composites science and technology 70, 970-980, 2010. DOI: 10.1016/j.compscitech.2010.02.014
  • Santofimia, M. J.; Nguyen-Minh, T.; Zhao, L.; Petrov, R.; Sabirov, I.; Sietsma, J. - New low carbon Q&P steels containing film-like intercritical ferrite. materials science and engineering a-structural materials properties microstructure and processing 527, 6429-6439, 2010. DOI: 10.1016/j.msea.2010.06.083
  • 2009

  • LLorca, Javier; Cox, Brian N. - Virtual fracture testing of composite materials and structures. international journal of fracture 158, 93-97, 2009. DOI: 10.1007/s10704-009-9383-y
  • Sabirov, Ilchat; Barnett, Matthew R.; Estrin, Yuri; Timokhina, Ilana; Hodgson, Peter D. - Deformation mechanisms in an ultra-fine grained Al alloy. international journal of materials research 100, 1679-1685, 2009. DOI: 10.3139/146.110239
  • Presas, M.; Pastor, J. Y.; LLorca, J.; Martin, A.; Segurado, J.; Gonzalez, C. - Strength and toughness of cellular SiC at elevated temperature. engineering failure analysis 16, 2598-2603, 2009. DOI: 10.1016/j.engfailanal.2009.04.029
  • Cadarso, V. J.; Llobera, A.; Fernandez-Sanchez, C.; Darder, M.; Dominguez, C. - Hollow waveguide-based full-field absorbance biosensor. sensors and actuators b-chemical 139, 143-149, 2009. DOI: 10.1016/j.snb.2008.10.034
  • Jerusalem, Antoine; Radovitzky, Raul - A continuum model of nanocrystalline metals under shock loading. modelling and simulation in materials science and engineering 17, 2009. DOI: 10.1088/0965-0393/17/2/025001
  • Moraleda, Joaquin; Segurado, Javier; Llorca, Javier - Effect of interface fracture on the tensile deformation of fiber-reinforced elastomers. international journal of solids and structures 46, 4287-4297, 2009. DOI: 10.1016/j.ijsolstr.2009.08.020
  • Sabirov, I.; Barnett, M. R.; Estrin, Y.; Hodgson, P. D. - The effect of strain rate on the deformation mechanisms and the strain rate sensitivity of an ultra-fine-grained Al alloy. scripta materialia 61, 181-184, 2009. DOI: 10.1016/j.scriptamat.2009.03.032
  • Dasari, Aravind; Yu, Zhong-Zhen; Mai, Yiu-Wing - Electrically conductive and super-tough polyamide-based nanocomposites. polymer 50, 4112-4121, 2009. DOI: 10.1016/j.polymer.2009.06.026
  • Santofimia, M. J.; Speer, J. G.; Clarke, A. J.; Zhao, L.; Sietsma, J. - Influence of interface mobility on the evolution of austenite-martensite grain assemblies during annealing. acta materialia 57, 4548-4557, 2009. DOI: 10.1016/j.actamat.2009.06.024
  • Perez-Prado, M. T.; Zhilyaev, A. P. - First Experimental Observation of Shear Induced hcp to bcc Transformation in Pure Zr. physical review letters 102, 2009. DOI: 10.1103/PhysRevLett.102.175504
  • 2008

  • Romero, Ignacio; Segurado, Javier; LLorca, Javier - Dislocation dynamics in non-convex domains using finite elements with embedded discontinuities. modelling and simulation in materials science and engineering 16, 2008. DOI: 10.1088/0965-0393/16/3/035008
  • Ester, Francisco J.; Merino, Rosa I.; Pastor, Jose Y.; Martin, Antonia; Llorca, Javier - Surface Modification of Al(2)O(3)-ZrO(2)(Y(2)O(3)) Eutectic Oxides by Laser Melting: Processing and Wear Resistance. journal of the american ceramic society 91, 3552-3559, 2008. DOI: 10.1111/j.1551-2916.2008.02728.x
  • Totry, Essam; Gonzalez, Carlos; LLorca, Javier - Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics. composites science and technology 68, 3128-3136, 2008. DOI: 10.1016/j.compscitech.2008.07.011
  • 2007

  • Weck, Arnaud; Segurado, Javier; LLorca, Javier; Wilkinson, David; Boehm, Helmut - Numerical simulations of void linkage in model materials using a nonlocal ductile damage approximation. international journal of fracture 148, 205-219, 2007. DOI: 10.1007/s10704-008-9195-5
  • Gonzalez, Carlos; Llorca, Javier - Numerical simulation of the fracture behavior of Ti/SiC composites between 20 degrees C and 400 degrees C. metallurgical and materials transactions a-physical metallurgy and materials science 38A, 169-179, 2007. DOI: 10.1007/s11661-006-9014-4
  • 317

  • del Río, J.S.; Pascual-González, C.; Martínez, V.; Jiménez, J.L.; González, C. - 3D-printed resistive carbon-fiber-reinforced sensors for monitoring the resin frontal flow during composite manufacturing. 317, 112422, 317. DOI: 10.1016/j.sna.2020.112422
  • Del Barrio, M.; Rana, M.; Vilatela, J.-J.; Lorenzo, E.; De Lacey, A.L.; Pita, M. - Photoelectrocatalytic detection of NADH on n-type silicon semiconductors facilitated by carbon nanotube fibers. electrochimica acta 377, 138071, . DOI: 10.1016/j.electacta.2021.138071
  • Dongwei Yao, D.; Yin, G.;Bi, Q.; Yin, X. - Basalt Fiber Modified Ethylene Vinyl Acetate/Magnesium Hydroxide Composites with Balanced Flame Retardancy and Improved Mechanical Properties. polymers 12, 9, . DOI: 10.3390/polym12092107
  • Lucarini, S; Segurado, J - DBFFT: A displacement based FFT approach for non-linear homogenization of the mechanical behavior. international journal of engineering science 144, . DOI: 10.1016/j.ijengsci.2019.103131