There is a need to find solutions to replace Critical Raw Materials (CRMs) such as Chromium, Nickel, Molybdenium and Vanadium in high volume end consumer products. Steels and superalloys with considerable amounts of these CRMs are widely used in many industrial applications, particularly under extreme conditions where corrosion and wear resistance are needed. It is generally accepted, that intermetallics in particular low cost FeAl offer outstanding material properties. Unfortunately, it is difficult to translate their properties to real products, as intermetallics suffer from low ductility at ambient temperature and poor machinability. The impact of FeAl intermetallics as a low cost Cr-free alternative for stainless steel would therefore be much higher if a cost effective industrial process would be available, that allows to manufacture complex 3-D geometries of almost unlimited shapes from small grain size (0.1-5 microns) high ductility material.